Samsung LCD TV 530 User Manual

English - 
or
TV Side Panel
Camcorder S-Video Cable (Not supplied)
1
Audio Cable 
 
(Not supplied)2
Video Cable (Not supplied)1
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. 
They allow you to view the camcorder tapes without using a VCR.
1.    Connect a Video Cable (or S-Video Cable) 
between the AV IN 2 
[VIDEO] (or S-VIDEO) 
jack on the TV and the 
VIDEO OUT jack on the 
camcorder.
2.
    Connect Audio Cables between the AV IN 2...

English - 10
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the 
instructions on pages 6~7). Skip step 1 if you have not yet connected t\
o an antenna or a cable system.
1.   Unplug the cable or antenna from the back 
of the TV.
2.
    Connect the cable or antenna to the  ANT IN 
terminal on the back of 
the VCR.
3.
    Connect an RF Cable between the ANT OUT 
terminal on the VCR 
and the ANT IN terminal...

English - 11
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.
1.   Connect an Optical Cable between the “DIGITAL AUDIO 
OUT (OPTICAL)” jacks on 
the TV and the Digital Audio 
Input jacks on the Digital Audio 
System.
    When a Digital Audio System is connected to the “DIGITAL 
AUDIO OUT (OPTICAL)” jack: 
Decrease the volume of the 
TV and adjust the volume 
level with the system’s volume 
control.
5.1CH...

English - 12
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
   Press the POWER button on the remote control. 
The message “Menu Language, Store Demo, Channels and Time will be set.” 
is displayed.
    Press the ENTER  button, then “Select language of the OSD. ” menu  
is automatically displayed.  Press the ENTER...

English - 1
8.   Press the ▲ or ▼ button to highlight the time zone for your local area. Pres s the ENTER  button. If you have received a digital signal, the time will be set automatically. If not, see page 45 to set the clock.
9.
    The message “Enjoy your watching.” is displayed.  
When you have finished, press the  ENTER  button.
If you want to reset this feature...
1.
   Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select “Setup”, then press the  ENTER  button.
2....

English - 14
Adjusting the Volume
Using the Volume Button
1.
 Press the VOL – or VOL +  button to increase or decrease the volume.  
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.
    Press MUTE button and the sound cuts off.  
“  ” is displayed on the screen.
2.
    To turn mute off, press the MUTE button again or simply press the   
VOL – or VOL +  button.
Viewing the Display
The display identifies the current channel and the status of certain audio-vide o...

English - 1
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu changes 
depending on which external input mode you are viewing.
1.
   Press the TOOLS  button. 
The “TOOLS” menu will appear.
2.
 Press the ▲ or ▼ button to select a menu.
3.
   Press the ▲/▼/◄/►/ ENTER  buttons to display, change, or use the selected items. For a more detailed description of each function, refer \
to the 
corresponding page.
Device List: see...

English - 16
Storing Channels in Memory (Automatic Method)
1.
   Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button. 
2.
    Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER  button.
3.
    Press the ▲ or ▼ button to select the antenna connection, then press the ENTER  button.
Air: “Air” antenna signal.   
Cable: “Cable” antenna signal.   
Auto: “Air” and “Cable” antenna signals.
4.
   When selecting the Cable TV...

English - 17
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable 
Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input 
source of your choice.
1.
   Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select “Input”, then press the  ENTER  button.
2.   Press the ENTER  button to select “Source List”.  
Press the ▲ or ▼ button to select signal source, then press the ENTER  button.
Available signal sources: TV,...

English - 18
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing\
 requirements.
1.
   Press the MENU button to display the menu.  
Press the ENTER  button to select “Picture”.
2.    Press the ENTER  button to select “Mode”. Press the ▲ or ▼ button to 
select “Dynamic”, “Standard” or “Movie”.  Press the ENTER  button.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for the optimum display...