Samsung LCD TV 530 User Manual

English - 1
Adjusting the Detailed Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust 
detailed picture settings.
Activating Detailed Settings
1.
   Press the MENU button to display the menu.  
Press the ENTER  button to select “Picture”. 
2.    Press the ENTER  button to select “Mode”.  
Press the ▲ or ▼ button to select “Standard” or “Movie”, then press the 
ENTER 
 button.
“Detailed Settings” is available in “Standard” or...

English - 20
Adjusting the Gamma
You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3)
8.
   Press the ▲ or ▼ button to select “Gamma”, then press the ENTER  button.
9.
   Press the ◄ or ► button to decrease or increase the value.  
Press the ENTER  button.
Setting the  Color Space
Color space is a color matrix composed of red, green and blue colors.  
Select your favorite color space to experience the most natural color.
10.
    Press the ▲ or ▼ button to select “Color Space”, then...

English - 21
Adjusting the White Balance
You can adjust the color temperature for more natural picture colors.
17.
   Press the ▲ or ▼ button to select “White Balance”, then press the  
ENTER  button.
18.    Select the required option by pressing the ▲ or ▼ button, then press the ENTER  button. 
19.   Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER  button.
R-Offset: Adjusts the red color darkness.
G-Offset: Adjusts the green color darkness.
B-Offset:...

English - 22
Resetting the Picture Settings to the Factory Defaults
1.   To select the desired picture mode, follow the “Changing the Picture 
Standard” instructions numbers 1 and 2. (see page 18)
2.
    Press the ▲ or ▼ button to select “Picture Reset”, then press the  
ENTER  button. 
3.    Press the ▲ or ▼ button to select “OK” or “Cancel”, then press the  
ENTER  button. 
  Press the EXIT button to exit. 
Each mode can be reset. 
➣
Setting the xvYCC 
Setting the xvYCC mode to “On” increases detail...

English - 2
Configuring	Picture	Options
Activating Picture Options
1.
   Press the MENU button to display the menu.  
Press the ENTER  button to select “Picture”.
2.    Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER  button.
Press the ▲ or ▼ button to select a particular item. Press the  ENTER 
 button.
When you are satisfied with your setting, press the ENTER 
 button. 
In PC mode, you can only make changes to the “Color Tone” and “Size” from 
among the items in “Picture...

English - 24
When Double (  ,  ) mode has been set in PIP, the Picture Size cannot be set.
Temporary image retention may occur when viewing a static image on the se\
t for more than two hours.
After selecting “Zoom1”, “Zoom2” or “Wide Fit” :  
Press the ◄ or ► button to select “Position”, then press the ENTER 
 button. Press the ▲ or ▼ button to move the picture up and down. 
Reset : Press the ◄ or ► button to select “Reset”, then press the  ENTER 
 button. You can initialize the setting.
After selecting...

English - 2
Setting the Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital 
Noise Reduction feature to help reduce any static and ghosting that may \
appear 
on the screen.
1.
   Follow the “Activating Picture Options” instructions numbers 1 and\
 2.  
(Refer to page 23)
2.
    Press the ▲ or ▼ button to select “Digital NR”, then press the ENTER  button.
3.
    Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High” or “Auto”.  
Press...

English - 26
Setting the Film Mode
The TV can be set to automatically sense and process film signals from all 
sources and adjust the picture for optimum quality.
1.
   Follow the “Activating Picture Options” instructions numbers 1 and\
 2.  
(Refer to page 23)
2.
    Press the ▲ or ▼ button to select “Film Mode”, then press the ENTER  button.
3.
    Press the ▲ or ▼ button to select “Off” or “Auto”,  then press the ENTER  button.
 Press the EXIT button to exit.
“Film mode” is supported in TV, Video,...

English - 27
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source. 
(See page 33 to select the PIP picture sound.)  This product has one built-in tuner, which does not allow PIP to function in 
the same mode. Please see ‘PIP Settings’ below for details.
While V-Chip (See page 49) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture 
1.
    Press the MENU button to display the menu....

English - 28
Changing the PIP Channel 
5.
   Press the ▲ or ▼ button to select “Air/Cable”, then press the ENTER  button.
6.
    Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER  button.
7.
    Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button.
8.
    Press the ▲ or ▼ button to select the desired channel in the PIP  window.  
Press the ENTER  button.
You can select only analog TV broadcasts on the PIP screen   
(sub-picture).
  Press the EXIT button to...