Samsung HP-R6372 Plasma Display User Manual
Here you can view all the pages of manual Samsung HP-R6372 Plasma Display User Manual. The Samsung manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 51
1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button. Press the or button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. 4 Press the or button to select a particular option (Contrast, Brightness, Sharpness, Color, or Tint), then press the ENTER button. Press the œor √button to decrease or increase the value of a particular item. •...
Page 52
52 5 Press the ENTER button to return to “Mode”. Press the or button to select “Color Tone”, then press the ENTER button. 6 Press the or button to select a particular option (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. Press the EXIT button to exit. Resetting the Picture Settings to the Factory Defaults 7 To return the factory defaults, select “Reset” by pressing the or button. Press the ENTER button. • The previously adjusted settings will be reset to the factory...
Page 53
53 Viewing the DNIe Demonstration This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe Demo to On, you can view the applied DNIe and normal pictures on the screen for demonstration purposes. Using this function, you can view the difference in the visual quality. 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “DNIe Demo”, then press the ENTER button. 3 Press the or button to...
Page 54
Changing the Screen Size Screen size selection depends on the type of video input. 54 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “Size”, then press the ENTER button. 3 Press the œor √button to select the screen size you want, then press the ENTER button. 4 Press the EXIT button to exit. Notes • Supported screen resolution modes may differ depending on the model of the product. • If you watch a still image or the 4:3...
Page 55
When you press the P.SIZE button under the cover of the remote control, the TV’s screen mode should appear in sequence. The screen displays in this order: 16:9, Panorama, Zoom1, Zoom2, 4:3. Note • If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto the screen. View the TV in 16:9 or Panorama mode as much as possible. 55 16:9 Sets the picture to 16:9 wide mode . Panorama Converts regular 4:3 aspect ratio screen to wide screen. Zoom1 The screen size when...
Page 56
56 Viewing the Picture-in-Picture Selecting the PIP Screen 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “PIP”, then press the ENTER button. 3 Press the ENTER button, then press the or button to select “On”. The PIP image will appear in the corner of the screen. • Pressing the or button will alternate between “On” and “Off”. Note • If the PIP On/Off does not function, check if the V-Chip Lock (refer to page...
Page 57
57 Selecting an External Signal You can use PIP to view a signal from an external source, such as a VCR. 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “PIP”, then press the ENTER button. 3 Press the or button to select “Source”, then press the ENTER button. 4 Press the or button to cycle through all of the available signal sources: “TV”, “AV1”, “AV2”, “S-Video1”, “S-Video2”, “Component1”, “Component2”, or...
Page 58
Swapping the Contents of the PIP and Main Image 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “PIP”, then press the ENTER button. 3 Press the or button to select “Swap”, then press the ENTER button. • The image in the PIP window will appear on the main screen, and vice versa. (Refer to page 56) Note •If main picture is in PC mode, Swap is not available. 4 Press the EXIT button to exit. 58 Mode : Dynamic√Size :...
Page 59
59 Changing the Size of the PIP Window 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “PIP”, then press the ENTER button. 3 Press the or button to select “Size”, then press the ENTER button. 4 Press the or button to select option you want, then press the ENTER button. 5 Press the EXIT button to exit. Note • When the size is Double, the screen is resized and PIP is canceled. PIP : On Source : TV Swap Size : Position...
Page 60
Changing the Location of the PIP Image 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “PIP”, then press the ENTER button. 3 Press the or button to select “Position”, then press the ENTER button. 4 Press the or button to select the PIP position you want, then press the ENTER button. 5 Press the EXIT button to exit. Note • In Double Window ( ) and Double Wide ( ) modes, Position cannot be selected. 60...