Samsung HP-R6372 Plasma Display User Manual
Here you can view all the pages of manual Samsung HP-R6372 Plasma Display User Manual. The Samsung manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 91
91 Note Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: • The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the Analog Input. Notes • The PC text quality is optimum in WXGA mode (1360 x 768@60Hz). • When this TV is used as a PC display, 32-bit color is...
Page 92
92 After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the SOURCE button to select “PC.” 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the or button to select “Position”, then press the ENTER button. 4 Adjust the position of screen by pressing the //œ/√button. 5 Press the EXIT button to exit. Changing the...
Page 93
93 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Picture Quality Adjustment Picture Automatic Adjustment Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the or button to select “Auto Adjustment”, then press the ENTER button. The message “Auto Adjustment in progress....
Page 94
Coarse Adjustment Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the ENTER button to select “Image Lock”. 4 Press the ENTER button again to select “Coarse”. Remove picture noise (vertical stripes) on the screen by pressing the œ or√button. (If Coarse is not set properly, vertical stripes will appear on the screen.) • Press the...
Page 95
Fine Tuning (Fine) Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the ENTER button to select “Image Lock”. 4 Press the or button to select “Fine”, then press the ENTER button. Remove picture noise on the screen by pressing the œ or√button. (If Fine is not set properly, noise will appear on the screen.) • Press the or...
Page 96
96 Image Reset Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the or button to select “Image Reset”, then press the ENTER button. The message “Image Reset is completed.” appears on the screen. • The previously adjusted settings will be reset to the factory defaults. Image Lock√Position√Auto Adjustment Image Reset PCTV...
Page 97
PLASMA DISPLAY PANEL Time Setting Setting the Clock .......................................................................98 Setting the On/Off Timer .........................................................100 Setting the Sleep Timer ............................................................101 BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 97
Page 98
Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 98 Option 1: Setting the Clock Manually 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the or button to...
Page 99
99 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the or button to select “Auto”, then press the ENTER button. 4 Press the or button to select “Time Zone”, then press the...
Page 100
100 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Time”, then press the ENTER button. Press the or button to select “On Timer”, then press the ENTER button. Press the or button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate “On Timer” with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press...