Samsung HP-R6372 Plasma Display User Manual

131
How to Set up Restrictions using “Canadian English”: E, C, C8+, G, PG, 14+, 18+
First, set up a personal identification number (PIN), and enable the V-Chip. (refer to page127)
1
Press the MENU button. Press the or button to select
“Setup”, then press the ENTER button. 
2 
Press the or button to select “V-Chip”, then press
the ENTER button.
The message “Enter PIN” will appear. 
Enter your 4 digit PIN.
3
The V-Chip screen will appear. Press the or button to
select “Canadian English”, then press...

132
How to Set up Restrictions using “Canadian French”: E, G, 8 ans +, 13 ans +, 16 ans +, 18 ans +
First, set up a personal identification number (PIN), and enable the V-Chip. (refer to page 127)
1
Press the MENU button. Press the or button to select
“Setup”, then press the ENTER button. 
2 
Press the or button to select “V-Chip”, then press
the ENTER button.
The message “Enter PIN” will appear. 
Enter your 4 digit PIN.
3
The V-Chip screen will appear. Press the or button to
select “Canadian...

133
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the
following message will appear: 
1
Enter your PIN.
To resume normal viewing, tune to a different channel using CH or CH button. 
Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out
all the channels. In this case, use the V-Chip function for an “emergency escape”:
1
Press the...

134
Electronic Program Guide
Your TV has an “Electronic Program Guide” to help you
navigate through all the possible viewing options. 
The EPG supplies information, such as program lists, 
start and end times of all available channels. 
In addition, detailed information about the program is 
often available in the EPG. (The availability and the 
amount of program details will vary depending on the
broadcaster.)
Viewing the Electronic Program Guide
ADisplays which channel is currently selected to show...

135
Using the Electronic Program Guide
1
Press the MENU button.
Press the or button to select “Guide”, then 
press the ENTER button.
2
Press the or button to select “Default Guide”, then
press the ENTER button.
3
Press the or button to select “Mini Guide” or “Full
Guide”, then press the ENTER button.
•  Mini Guide : Displays the guide for one channel.
•  Full Guide : Displays the guide for all channels.
4
Press the EXIT button to exit.
Mini Guide√Full Guide√Remind List√Default Guide : Mini Guide√...

136
Viewing Information about a Single Channel
1
Press the MENU button.
Press the or button to select “Guide”, then 
press the ENTER button.
2
Press the ENTER button to select “Mini Guide”.
Press the or buttons to view information about 
one channel by time.
You can switch between Full Guide mode and Mini 
Guide mode by pressing the Red button repeatedly. 
Select the program you want by pressing the or 
buttons and press the INFO button on the remote 
control.
• ENTER button : Press to watch the...

137
Viewing Information about Channels
Displays the program time and content for all channels.
This function is available only when the program is digital.
1
Press the MENU button.
Press the or button to select “Guide”, then 
press the ENTER button.
2
Press the or button to select “Full Guide”, then press
the ENTER button.
3
Press the Green button to activate “-2 Hours” and the
Yellow button to activate “+2 Hours”.
• INFO button : Displays detailed information for 
the selected digital program.
•...

138
Viewing the Remind List
If you have made a scheduled viewing list of programs you would like to see, the channel will be 
automatically switched to the scheduled program at the scheduled time even if you are watching 
another program.
1
Press the MENU button.
Press the or button to select “Guide”, then 
press the ENTER button.
2
Press the ENTER button to select “Full Guide”.
Press the or button to select programs you would
like to see, then press the enter button.
The symbol “
✔” will be...

139
To view the Remind List
1
Press the MENU button.
Press the or button to select “Guide”, then 
press the ENTER button.
2
Press the or button to select “Remind List”, then
press the ENTER button.
To remove the scheduled programs
1
Press the or button to select a program to be
removed, then press the ENTER button.
To remove all programs, press the œor √button to 
select “Cancel All”, then press the ENTER button. 
2
Press the EXIT button to exit.
Mini Guide√Full Guide√Remind List√Default Guide :...

BN68-00825N-01Eng_(136~147)  9/28/05  9:27 AM  Page 140