Samsung HP-R6372 Plasma Display User Manual

41
1
Press the MENU button.
Press the or button to select “Channel”, then
press the ENTER button.
2
Press the or button to select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the ENTER button will alternate
between add channel and delete channel.
Press the CH or CH button to switch to the 
appropriate channel, then repeat above.
Press the EXIT button to exit.
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from memory):
Antenna :...

42
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels 
in sequence. You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.) 
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”.  
When you use the...

43
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and analog signal.
For example, for Channel 7
-1 (digital), press “7”, then “-”, 
then “1”.
For channel 7
-2 (analog), press “7”, then “-”, then “2”.
Notes 
• HD indicates the TV is receiving a Digital High Definition signal. 
SD indicates the TV is receiving a Standard Definition signal. 
• For quick channel change, press the number buttons, then press the ENTER button.
DTV Cable
7 - 1
KYW-HD
HD
DTV Cable
7 -...

Setting Up Your Remote Control
44
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal
remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your
VCR, Cable box and DVD are made by manufacturers other than Samsung). 
Note :
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, 
and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR, Cable box or DVD player  
1 
Turn off your...

45
Remote Control Codes
VCR Codes
DVD Codes Cable Box Codes
BN68-00825N-01Eng_(034~047)  9/28/05  9:12 AM  Page 45 

Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top Box, and the TV source (broadcast or cable).
46
Setting the Signal Source
1
Press the MENU button. 
Press the ENTER button to select “Input”.
2
Press the ENTER button to select “Source List”.
3
Press the or button to select signal source, then
press the ENTER button.
Note• Only connected devices can be selected.
4 
Press the EXIT button to exit.
Notes
• When you...

47
Assigning Names to External input mode
1
Press the MENU button.
Press the ENTER button to select “Input”.
2
Press the or button to select “Edit Name”, then
press the ENTER button.
3
Press the ENTER button.
Press the or button to select external device, 
then press the ENTER button. 
•  You can select the VCR, DVD, D-VHS, Cable STB, 
HD STB, Satellite STB, PVR STB, AV Receiver, 
DVD Receiver, GAME, Camcorder, DVD Combo, 
PC, VOD STB, or TV. 
•  Set other signal sources (AV2, S-Video1, S-Video2,...

BN68-00825N-01Eng_(048~065)  9/28/05  9:12 AM  Page 48 

PLASMA DISPLAY PANEL
Picture Control
Changing the Picture Standard ......................................................50
Customizing the Picture Settings ....................................................51
Viewing the DNIe Demonstration ..................................................53
Changing the Screen Size ............................................................54
Viewing the Picture-in-Picture..........................................................56
Selecting the Sound Source...

Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
50
1
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button.
➤  ➤ Quick way to access the picture setting: Just press “P.MODE” button on 
the remote control.
2
Press the ENTER button again to select “Mode”.
3
Press the ENTER button.
Press the or  button to select the desired picture 
mode (Dynamic, Standard, Movie, Custom), then press 
the ENTER...