Samsung HP-R6372 Plasma Display User Manual

31
Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
Insert the CableCARD into the “CableCARD” slot and the message “CableCARDTMInserted” is
displayed on  the screen. If the channel information does not already exist, the message
“Updating Channel List” is displayed during channel information configuration.  
When channel information configuration is finished, the message “Updating Completed” is
displayed. It indicates that the channel list is now updated.
How to...

BN68-00825N-01Eng_(002~033)  9/28/05  9:09 AM  Page 32 

PLASMA DISPLAY PANEL
Operation
Turning the TV On and Off ............................................................34
Viewing the Menus and Displays ..................................................38
Memorizing the Channels ............................................................39
Adding and Erasing Channels ......................................................41
Setting Up Your Remote Control ....................................................44
Viewing an External Signal Source...

Turning the TV On and Off
34
Turning the TV On and Off
Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its features.
You can also use the Power button on the front of the TV.
Note
• If your TV isn’t turned on when the POWER button is pressed:
Press the 
MODEbutton to check if the TV mode has been
chosen
. 
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language,...

3
Press the or button to memorize the channels of
the selected connection. 
Press the ENTER button to select “Start”.
Notes
•  If the antenna is connected to ANT 1 IN (CABLE IN),
select “Cable” and if it is connected to ANT 2 IN 
(AIR IN), select “Air”.
• If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
4
Select the correct signal source (STD, HRC, and IRC) by
pressing the or button, then press the ENTER button.
Note
•
STD, HRC, and IRC identify various types of cable
TV...

36
6
Press the ENTER button. Press the or button to 
select “Yes” or “No”, then the ENTER button.
“Select the time zone in which you live” menu is 
automatically displayed.
7
Press the or button to highlight the time zone 
for your local area (and to move the highlight to the 
appropriate time zone on the map of the United States).
Press the ENTER button. 
If you have received a digital signal, the time will 
be set automatically. If not, see page 98 to set the 
clock.
8
The message “Completed. Time...

37
To reset this feature...
1
Press the MENU button. Press the or button to select
“Setup”, then press the ENTER button.
2
Press the ENTER button to select “Plug & Play”.
3
For further details on setting up options, refer to the 
previous page.
Note
• Plug and Play can only be accessed in the TV mode.
Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√
†More
SetupTV
MoveEnterReturn
Menu language, Channels 
and Time will be set.i
Start
BN68-00825N-01Eng_(034~047)  9/28/05...

38
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears on the TV screen. 
This system makes it convenient and fast to use features on the TV. 
Your TV also lets you display the status of many of your TV’s features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the 
screen. The Input menu is selected.
2
Press the or button to move to items in the menu.
Press the œ/√/ENTER buttons to display, 
change, or...

39
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
Selecting a broadcast source
Before your...

40
Storing Channels in Memory 
4
Select the correct signal source (STD, HRC, and IRC) by
pressing the or button, then press the ENTER button.
Note
•
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected.
5
The TV begins memorizing all available stations. 
Press the ENTER button at any time to interrupt the 
memorization process.
Press the...