Samsung Hp-p5091 Plasma Display Owners Instructions

21
Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner’s manual.
If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack
on the WIRELESS HOME AV CENTER.
If your audio system has an optical digital audio input, connect to the “OPTICAL“ output jack
on the WIRELESS HOME AV CENTER.
Be certain to remove the black...

22
Connecting to a second TV
WIRELESS HOME AV CENTERTV
Video cable Audio cable
Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME
AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV. 
Notes
•Please be sure to match the color coded input terminals and cable jacks.
•TV OUT works only for the AIR and Cable input sources. It does not work for the external input
sources because of content protection.
Videotape Playback:
1. Turn on your PDP and WIRELESS HOME AV...

23
Connecting Speakers
External speakers are sold separately. Check with your dealer.
Connect the speaker audio cable to the external speaker output jack on the PDP matching the
“+” and “-” ends of the cable with the diagram on the PDP. 
How to Connect
Speaker Cable
✱External speakers MUST have a power handling 
capability of 12 watts minimum (impedance 8 ohm).Speaker Cable 

24
Installing the Speakers
This speaker installation guide is for the PSN5042 speakers.
Parts
How to Attach the Speakers when using the Stand
2EA
2EA1EA
Speakers
1EA
Middle Cabinet
(Wall Mount Only) Speaker Dust Cover
Speaker Cable
Screw 2EA!Screw 6EA@
Screws
1 
Remove the screws indicated on the rear of the PDP (6 screws on the left and right
sides). 

25
Screw②
2 
Set the speaker guide bracket into the square grooves located on either side of the
PDP’s bottom rear, then push the speaker guide bracket towards the center (as the 
arrow illustrates). Secure the speaker guide bracket with provided screws @. 
(Always use the proper screws, as indicated.)
3 
Secure the speaker dust cover by setting it into the grooves located on the front side
of the speakers.
4 
Connect the speakers to the PDP using the speaker cable. 
The connection terminals are on the...

26
How to Attach the Speakers when using the Wall Mount
1 
Remove the screws indicated on the rear of the PDP (6 screws on the left and right
sides, 2 screws on the center).
2 
Set the speaker guide bracket into the square grooves located on either side of the
PDP’s bottom rear, then push the speaker guide bracket towards the center (as the 
arrow illustrates). Secure the speaker guide bracket with provided screws @.
Secure the middle cabinet to the center of the PDP with a screw !. 
(Always use the...

27
3 
Secure the speaker dust cover by setting it into the grooves located on the front side
of the speakers.
4 
Connect the speakers to the PDP using the speaker cables. 
The connection terminals are on the rear side of both the PDP and the speakers. 
(Match the color coded terminals and cables.)
Notes
•When moving the PDP with the speakers attached, be sure to hold on to the PDP 
to prevent damage. (Damage may occur to the speaker connecting brackets or 
the speakers.)
•Speakers are 8Ωimpedance, 12W...

28
1
Firmly secure the pegs to the both sides of the stand base using 8 screws provided. 
How to assemble and attach the
Stand-Base
This guide is for the SMN5040 stand.
2
Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the 
stand pegs. (The exterior of the set may be different than the picture.) 
3
For your convenience, the angle of the PDP may be adjusted up to 20° left/right.
Note
•Stand is sold seperately. Check with your dealer.
Warning
Firmly secure the...

29
Wall Installation Instructions
1 
Do not install the PDP in any location other than a vertical wall.
2 
To protect the performance of the PDP and prevent problems, avoid the following
locations :
• Next to smoke and fire detectors.
• Areas subject to vibration.
• Areas subject to high voltage.
• Near or around any heating apparatus.
3 
Use only recommended parts and components.
Installation Notes
Parts (Wall attachment panel is sold separately. Check with your dealer.)
➤ ➤This wall mount bracket...

30
1 
The wall mount comes packaged in 3 parts. These parts must be assembled together.
Please tighten the captive screws(4EA) in the direction of the arrow after assembling 
the bracket. Install the Wall Mount Bracket after the screws are securely inserted 
into the wall.
2 
After installing the wall mount bracket,
assemble the support bars and hinges 
(as illustrated) using screws provided. 
(12 screws(
@) are provided. For safety
reasons, make sure all 12 screws are 
firmly attached.)
How to assemble...