Samsung Hp-p5091 Plasma Display Owners Instructions

41
1
Press the MENU button. Press the ▲or ▼button to 
select “Preference”, then press the ENTER button. 
2
Press the ENTER button. 
The Favorite Channels option is displayed.
3
Press the ▲or ▼button to select the channel you 
want to designate as a “Favorite Channel” and press 
the ENTER button.
For each Favorite Channel, a “√” icon will appear next
to the channel number. To cancel Favorite Channel, 
press ENTER again.
➤ ➤To set all listed channels, press the œor √button and 
select “Select All”. All of...

42
1
Press the MENU button. Press the ▲or ▼button to 
select “Channel”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Fine Tune”, then
press the ENTER button.
3
Press the œor √button to adjust the fine tuning.
4
To store the fine tuning setting in the TV’s memory, 
press the ENTER button. (A star icon(*) will appear.)
To reset the fine tuning to “0”, select “Reset” by 
pressing the ▼button, then press the ENTER button.
5
Press the MENU button to exit.
Note
•Only analog channels can be...

Time TV
MoveEnterReturn
Select the time zone in which you live
43
1
Press the MENU button. Press the ▲or ▼button to 
select “Setup”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Time”, then press 
the ENTER button.
3
You will be asked if your local area observes 
Daylight Saving Time.
Press the ▲or ▼button to select “Yes”, and press 
ENTER button.
4
Press the ▲or ▼button to select your time zone for 
your local area (move the highlight to the appropriate 
time zone on the map of the...

44
1
Press the MENU button on the remote control.
2
Use the ▲or ▼button to select “Channel”, then 
press the ENTER button.
3
Press the ▲or ▼button to select “Signal Strength”, 
then press the ENTER button. The “Signal Strength” 
meter will be displayed. 
If the signal strength meter indicates that the signal is 
weak, physically adjust your antenna to increase the 
signal strength. Continue to adjust the antenna until 
you find the best position with the strongest signal.
4
When you have finished...

45
Setting Up your Remote Control
This PDPs remote control can operate almost any VCR, Cable box or DVD. After it has been set up 
properly, your remote control can operate in four different modes : TV, VCR, CATV, or DVD. 
Pressing the corresponding button on the remote control allows you to switch between these modes, 
and control whichever piece of equipment you choose.
Notes :
●The remote control may not be compatible with all DVD Players, VCRs, Cable boxes.   
●The remote control can only operate...

46
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes
Admiral 020
Aiwa 025
Akai 027, 004, 032
Audio Dynamics 007, 026
Bell&Howell 018
Broksonic 022
Candle 002, 006, 003, 015, 008, 055
Canon 021, 056
Citizen 002, 006, 003, 015, 008, 055
Colortyme 007
Craig 002, 024
Curtis Mathes 002, 017, 007, 008, 021,
025, 056, 064, 066
Daewoo 003, 015, 010, 011, 012, 013, 014, 016 
DBX 007, 026
Dimensia 017
Dynatech 034
Emerson 001, 003, 006, 021, 022, 025,
030, 032, 034, 040, 047, 050,
052, 060, 063, 065, 066,...

PLASMA DISPLAY PANEL
with WIRELESS HOME AV CENTER
Picture Control
Customizing the Picture ................................................................48
Using Automatic Picture Settings ....................................................49
Selecting the Color Tone ................................................................50
DNIe (Digital Natural Image engine)  ............................................51
Changing the Picture Size ............................................................52 

48
1 
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “Display Picture/
Sound Menu”, then press the ENTER button.
3 
Press the ▲or ▼button to select “Picture”, then press
the ENTER button.
4
Press the ▲or ▼button to select “Custom”, then press
the ENTER button.
You will also see the items “Contrast”, “Brightness”, 
“Sharpness”, “Color”, and “Tint”.
5
Press the ▲or ▼ button to select the item you wish to
change, then press the...

49
1 
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button.
➤ ➤Quick way to access the picture setting: 
Just press the “P.MODE” button on the remote control.
2 
Press the ▲or ▼button to select “Display Picture/
Sound Menu”, then press the ENTER button.
3 
Press the ▲or ▼button to select “Picture”, then press
the ENTER button.
4 
Press the ENTER button. 
5 
Press the ▲or ▼button to select “Dynamic”, 
“Standard”, “Movie”, or “Custom” picture setting.
6 
Press the...

50
1
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “Display Picture/
Sound Menu”, then press the ENTER button.
3
Press the ▲or ▼button to select “Picture”, then press
the ENTER button.
4
Press the ▲or ▼button to select “Color Tone”, then
press the ENTER button. 
5
Press the ▲or ▼button to select “Cool2”, “Cool 1”, 
“Normal”, “Warm 1”, or “Warm 2”, then press the 
ENTER button.
6
Press the MENU button to exit.
Selecting the...