Samsung Hp-p5091 Plasma Display Owners Instructions

Owner’s Instructions
HP-P5091
with WIRELESS HOME AV CENTER 

Important Warranty Information
Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video. 
The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded 
to fill the screen if your model offers this feature and the images are constantly moving. 
Displaying stationary graphics and images on screen, such as the dark side-bars on...

3
User Instructions 
This product is restricted  to indoor operations to reduce any potential for harmful interference 
to co-channel MSS operations.
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on
the plasma display panel for more than several minutes as it can cause screen image retention. 
This image retention is also known as “screen burn”. To avoid such image retention, refer to page
48 of this manual to reduce the degree of...

Table of Contents
General Information
Your New Plasma Display Panel ......................6
WIRELESS AV RECEIVER ................................8
Your WIRELESS HOME AV CENTER ................9
Remote Control Buttons ................................11
Connections
Connecting the PDP to the WIRELESS HOME
AV CENTER ................................................14
Connecting VHF and UHF Antennas ..............15
Connecting Cable TV ..................................16
Connecting a VCR...

PLASMA DISPLAY PANEL
with WIRELESS HOME AV CENTER
General Information
Your New Plasma Display Panel ......................................................6
WIRELESS AV RECEIVER..................................................................8
Your WIRELESS HOME AV CENTER ..................................................9
Remote Control Buttons ................................................................11 

6
Your New Plasma Display Panel
Front Panel
7
8
ŒSOURCE button
Press to toggle between all the external input sources 
(ie., Component, AV1, AV2, and S-Video).
´MENU button
Displays the main on-screen menu.
ˇVOL(+, -) buttons
Press to increase or decrease the volume. Also used to 
select or adjust items on the on-screen menu.
¨CH( , ) buttons
Press CH or CH to change Channels. 
Also used to move up or down in the On-screen menu.
ˆENTER( ) button
Press to confirm a selection.
ØPOWER Indicator
Power Off  :...

7
Rear Panel
Checking Accessories
Remote Control/
AAA Batteries
(MD59-00355A)Antenna Cable
(BN39-00333A)Wireless signal cable
(MD39-00108A)
Power Cord (3903-000085) Owner’s Instructions
Ferrite Cores : 2EA (3301-001201) 
Once you have unpacked your PDP with WIRELESS HOME AV CENTER, check to make sure that you have all
the parts shown here. If any piece is missing or broken, call your dealer. 
ŒONLY FOR SERVICE
For Service only
´WIRELESS SIGNAL INPUT
Connect to the WIRELESS AV RECEIVER’s A/V 
SIGNAL Port...

8
WIRELESS AV RECEIVER
1.  ONLY FOR SERVICE
For Service only
2.  AV SIGNAL JACK
Connect to the WIRELESS SIGNAL INPUT Port on the
rear of the PDP. 

9
Your WIRELESS HOME AV CENTER
Front Panel
ŒPOWER
Press to turn the power on or off.
Power On : GREEN
Power Off : RED
´Wireless LED
This LED will light green when Wireless 
communication is successful.
ˇ  DTV(LED)
This LED will light green when the DTV signal 
is recognized. The LED remains unlit for 
non-DTV signals.
¨SOURCE
Press to toggle between all the external input 
sources (ie., Component, AV1, AV2, and 
S-Video).
ˆINFO
Press to display information about the current 
box settings and program:...

10
Rear Panel
 
ŒAIR (75Ω)
The cable from an off-air TV antenna (not from 
a satellite dish) connects to this jack.
Both standard analog (NTSC) and high 
definition digital (ATSC) program broadcasts 
can be received through a single antenna 
connected to this jack.
´CABLE (75Ω)
The RG-6 cable from your cable TV provider (if
you have one) connects to this jack.
ˇ  S-VIDEO IN
This jack connects your WIRELESS HOME AV 
CENTER to a VCR that accepts S-Video output.
¨AV1, AV2 (VIDEO IN)
Using standard video...