Samsung Hp-p5091 Plasma Display Owners Instructions
Have a look at the manual Samsung Hp-p5091 Plasma Display Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack on the WIRELESS HOME AV CENTER. If your audio system has an optical digital audio input, connect to the “OPTICAL“ output jack on the WIRELESS HOME AV CENTER. Be certain to remove the black cover from the optical output before inserting the cable. If your system has both coaxial and optical digital audio inputs, SAMSUNG recommends you use the optical digital output on the WIRELESS HOME AV CENTER. Do not connect both optical and coaxial cables. This may damage your audio system. • OPTICAL: Converts the electric signal into an optical light signal, and transmits it through glass fibers. • COAXIAL: The digital audio signal is received through a coaxial copper cable. How to Connect 1 2 3 WIRELESS HOME AV CENTERDigital Audio System or Coaxial cable Optical cable
22 Connecting to a second TV WIRELESS HOME AV CENTERTV Video cable Audio cable Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV. Notes •Please be sure to match the color coded input terminals and cable jacks. •TV OUT works only for the AIR and Cable input sources. It does not work for the external input sources because of content protection. Videotape Playback: 1. Turn on your PDP and WIRELESS HOME AV CENTER. 2. Turn on your TV. How to Connect
23 Connecting Speakers External speakers are sold separately. Check with your dealer. Connect the speaker audio cable to the external speaker output jack on the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. How to Connect Speaker Cable ✱External speakers MUST have a power handling capability of 12 watts minimum (impedance 8 ohm).Speaker Cable
24 Installing the Speakers This speaker installation guide is for the PSN5042 speakers. Parts How to Attach the Speakers when using the Stand 2EA 2EA1EA Speakers 1EA Middle Cabinet (Wall Mount Only) Speaker Dust Cover Speaker Cable Screw 2EA!Screw 6EA@ Screws 1 Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides).
25 Screw② 2 Set the speaker guide bracket into the square grooves located on either side of the PDP’s bottom rear, then push the speaker guide bracket towards the center (as the arrow illustrates). Secure the speaker guide bracket with provided screws @. (Always use the proper screws, as indicated.) 3 Secure the speaker dust cover by setting it into the grooves located on the front side of the speakers. 4 Connect the speakers to the PDP using the speaker cable. The connection terminals are on the rear side of both the PDP and the speakers. (Match the color coded terminals and cables.) BLACK BLACK REDRED Notes •When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage. (Damage may occur to the speaker connecting brackets or the speakers.) •Speakers of 8Ωimpedance, 12W Nom. Power, 30W Max. Power is recommended.
26 How to Attach the Speakers when using the Wall Mount 1 Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center). 2 Set the speaker guide bracket into the square grooves located on either side of the PDP’s bottom rear, then push the speaker guide bracket towards the center (as the arrow illustrates). Secure the speaker guide bracket with provided screws @. Secure the middle cabinet to the center of the PDP with a screw !. (Always use the proper screws, as indicated.) Screw② Screw①
27 3 Secure the speaker dust cover by setting it into the grooves located on the front side of the speakers. 4 Connect the speakers to the PDP using the speaker cables. The connection terminals are on the rear side of both the PDP and the speakers. (Match the color coded terminals and cables.) Notes •When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage. (Damage may occur to the speaker connecting brackets or the speakers.) •Speakers are 8Ωimpedance, 12W Nom. Power, 30W Max. Power is recommended. BLACK BLACK RED RED
28 1 Firmly secure the pegs to the both sides of the stand base using 8 screws provided. How to assemble and attach the Stand-Base This guide is for the SMN5040 stand. 2 Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the stand pegs. (The exterior of the set may be different than the picture.) 3 For your convenience, the angle of the PDP may be adjusted up to 20° left/right. Note •Stand is sold seperately. Check with your dealer. Warning Firmly secure the stand for the PDP before moving it, as the stand may fall and could cause serious injury.
29 Wall Installation Instructions 1 Do not install the PDP in any location other than a vertical wall. 2 To protect the performance of the PDP and prevent problems, avoid the following locations : • Next to smoke and fire detectors. • Areas subject to vibration. • Areas subject to high voltage. • Near or around any heating apparatus. 3 Use only recommended parts and components. Installation Notes Parts (Wall attachment panel is sold separately. Check with your dealer.) ➤ ➤This wall mount bracket installation guide is for the following model : HP-P5091 Insulation Holder : 4 EASCREW!: 4 EASCREW@: 12 EA 1EA 2EALEFT :1EA RIGHT :1EA Wall Mount Bracket ASSY-HINGE Support Bars Screws
30 1 The wall mount comes packaged in 3 parts. These parts must be assembled together. Please tighten the captive screws(4EA) in the direction of the arrow after assembling the bracket. Install the Wall Mount Bracket after the screws are securely inserted into the wall. 2 After installing the wall mount bracket, assemble the support bars and hinges (as illustrated) using screws provided. (12 screws( @) are provided. For safety reasons, make sure all 12 screws are firmly attached.) How to assemble the Wall Mount Bracket ASSY-HINGE (LEFT) Separate ASSY-HINGE into left and right.Wall Mount Bracket Wall Mount Bracket Support Bars Support BarsCaptive Screws ASSY-HINGE (RIGHT) ASSY-HINGE (LEFT) ASSY-HINGE (RIGHT) 3 After securing the screws, be sure that every part is firmly attached (as shown in the illustration). ASSY- HINGE (LEFT) ASSY-HINGE (RIGHT)