Samsung Dcs Compact General Description Manual

							

2.5
Door Phone Interface Module (DPIM) and
Door Phone (see Figures 2–11 and 2–12)

The DPIM adapts any DLI circuit for use
with the door phone unit

Commonly used to request entry through
locked doors (interior or exterior) or as a
room monitoring box

Provides contact control to be used with
customer-provided electric door lock

Door phone is wall-mounted

Door phone is weather resistant
FIGURE 2–10
FIGURE 2–11
FIGURE 2–12       
						

							

2.6
FIGURE 2–13
Computer Telephony Module (CTM) (See Figure 2–13)

Provides RS232 connection via DB9 for TAPI applications

Connects with any DLI port
Single Line Telephone (See Figure 2–14)

Four fixed function keys: hold, flash,
new call, and monitor.

Data Port: selectable to share station
extension or utilize a separate extension

On hook dialing

Message Waiting/Ring Indicator

Desk or wall mounted

Ring volume control

Four available ring tones.

Available in almond and black
Note: This single line telephone set is
FCC approved for direct connection
to the public telephone network.
FCC # A3LKOR-24627-TE-T   REN 0.9B
UL LISTED 19X9   FILE # ETI 8093
FIGURE 2–14     
						

							

3.1
PART 3. SPECIFICATIONS
The following tables provide technical data for the DCS COMPACT hybrid/key telephone
system.
3.1ELECTRICAL SPECIFICATIONS
AC INPUT 120 (88–132) VAC (48–63 Hz)
POWER CONSUMPTION (MAX) 97 WATTS MAXIMUM
FUSE RATING 3 AMP
BTU RATING (MAX)  5.5 BTU/MINUTE
+5 VOLTS 2.0 AMPS MAX
DC OUTPUT–5 VOLTS 0.5 AMPS MAX
–48 VOLTS 1.0 AMPS MAX
3.2DIMENSIONS AND WEIGHTS
HEIGHT WIDTH DEPTH WEIGHT
DCS COMPACT BASIC SYSTEM: 22.5 14.25 5 16 lb.
SINGLE CABINET
EXPANDED SYSTEM 22.5 14.25 5 22 lb.
DIGITAL KEYSET (ALL MODELS) 4.25 8.50 9 2 lb. 9 oz.
ADD-ON MODULE 4.25 4.25 9 1 lb. 3 oz.
DOOR PHONE 5 3.88 1.25 6.8 oz.
3.3ENVIRONMENTAL LIMITS
OPERATING TEMPERATURE 32–104 °F/1–40 °C
STORAGE TEMPERATURE -13–158 °F/-10.5–70 °C
HUMIDITY 10%–90% NON-CONDENSING 
						

							
3.4CABLE REQUIREMENTS
EQUIPMENT CABLE AWG MAX FEET MAX METERS
DIGITAL KEYSETS 1 PR. TWISTED 24 1300 400
ADD-ON MODULES 1 PR. TWISTED 24 1300 400
SINGLE LINE STATION 1 PR. TWISTED 24 3000 1 KM
DOOR PHONE 2 PR. TWISTED 24 330* 100
*This is the maximum length of the cable between the door phone and the DPIM. The
DPIM can be installed up to 900 cable feet from the KSU.
3.5SYSTEM TONES
TONE FREQUENCIES CADENCE
DIAL TONE 350 + 440 Hz CONTINUOUS
RING BACK TONE 440 + 480 Hz 1 sec on + 3 sec off
BUSY TONE 480 + 620 Hz 0.5 sec on + 0.5 sec off
DND/NO MORE CALLS 480 + 620 Hz 0.25 sec on + 0.25 sec off
ERROR TONE 480 + 620 Hz 0.25 sec of each tone
CONFIRMATION TONE 350 + 440 Hz Three bursts of tone
0.1 sec on + 0.1 sec off
TRANSFER/CONF 350 + 440 Hz 0.1 sec on + 0.1 sec off
3.2 
						

							

3.3
SYSTEM TONES     
						

							
3.6KEYSET LED INDICATIONS
CONDITION LED COLOR LED ON LED OFF
LINE IDLE OFF–OFF
LINE IN USE RED/GREEN STEADY–
RECALL AMBER 500 ms 500 ms
CALL ON HOLD RED/GREEN 500 ms 500 ms
RINGING C.O. CALL RED/GREEN 100 ms 100 ms
RINGING INTERNAL CALL GREEN 100 ms 100 ms
DND INDICATION RED 100 ms ON/100 ms OFF 500 ms
 for 500 ms
3.7RESERVE POWER DURATION ESTIMATES
(in minutes)*
   NO. OF                       UPS CAPACITY IN VOLT AMPS (VA)
STATIONS250 400 450 600 900 1250 2000
4 65 160 200 245 360 490 930
8 45 110 135 160 240 320 625
12 40 90 115 140 200 280 535
16 30 75 90 110 160 220 415
24 25 50 70 85 120 175 380
32 20 45 60 75 100 150 330
*These are approximate values based on an idle system. The greater the C.O. line activity
on the system, the lower these readings will become. In addition, specific UPS devices,
due to their internal construction, can have greater or lesser values.
3.4 
						

							
PART 4. FEATURES
SYSTEM FEATURES
4.1.1
Account Code EntryForcedVoluntaryAll Call Voice PageAttention ToneAuthorization CodesForcedVoluntaryAutomatic HoldBackground MusicCaller ID†
Name/Number DisplayNext CallSave CID NumberStore CID NumberInquire Park/HoldCID Review ListInvestigateAbandon Call List (50)CID on SMDRNumber to Name Translation (250)Call ForwardingAll CallsBusyNo AnswerDNDBusy/No AnswerFollow MeExternalTo Voice MailCall HoldExclusiveSystemRemoteCall Park and PageCall PickupDirectedGroups (20)Call Waiting/Camp-OnCentrex/PBX UseChain DialingClass of ServiceCommon Bell ControlConferenceAdd On (5 Party)UnsupervisedComputer Telephony Integration (CTI)†
TAPIData SecurityDatabase PrintoutDialed Number Identification Service(DNIS)†
Day/Night RoutingBusy or Camp-On OptionDirect In LinesDirect Inward Dialing (DID)†
Day/Night RoutingBusy or Camp-On OptionDirect Inward System Access (DISA)Direct Trunk Selection
DISA Security
Distinctive RingingDoor Lock Release (Programmable)Door PhonesDoor Phone Night RingE & M Tie LinesExecutive Barge-In (Override)Station or TrunkWith/Without Warning ToneExecutive/Secretary PoolingExternal Music InterfacesExternal Page InterfacesFlash Key OperationFlexible RingingDay Ring AssignmentsNight Ring AssignmentsHot LineIn Group/Out of GroupIncoming Call DistributionIncoming/Outgoing ServiceIndividual Line ControlLeast Cost RoutingLive System ProgrammingFrom any Display KeysetWith a Personal ComputerMeet Me Page and AnswerMemory ProtectionMessage Waiting InstructionsMicrophone On/Off per StationMusic on Hold—FlexibleNight ServiceAutomaticManualOff Premises Extensions (OPX)Operator GroupOverflowOperatorStation GroupPagingInternal Zones (4)External Zones (4)All InternalAll ExternalPage AllPower Failure TransferPrimeline SelectionPrivate LinesProgrammable Line PrivacyProgrammable TimersRecallsRemote Programming —PCRing Over PageSingle Line ConnectionsSpeed Dial Numbers (1500)Station List (50 Max)System List (500 Max)Speed Dial by DirectoryStation Hunt Groups (30)DistributedSequentialUnconditional
Station Message Detail Recording(SMDR) 
System Alarms 
System Directory
Toll RestrictionBy Day or NightBy Line or StationEight Dialing ClassesSpecial Code TableToll Restriction OverrideTone or Pulse DialingTransferScreened/UnscreenedVoice Mail Transfer KeyWith Camp-OnTrunk Groups (11)Universal AnswerVoice Mail IntegrationWalking Class of Service
†Requires optional hardware and/or software. Ask your dealer for details.\
D irectory Names 
						

							

4.1 SYSTEM FEATURE DESCRIPTIONS
ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up from
a call. This account code will appear in the SMDR printout for that call record. Keyset
users may enter this code using an account (ACCT) key without interrupting a conver-
sation. Single line set users must temporarily interrupt the call by hook-flashing and
dialing the feature access code. Account codes can be up to 12 digits long. Characters
can include the digits 0–9.
FORCED
When forced, they are always verified from a system list of 250 entries. Account codes
are always printed on the SMDR report. Account codes can be up to 12 digits long.
They can contain the digits 0–9.
VOLUNTARY
Users may elect to enter an account code for any call. Characters can include the
digits 0–9, star (
) and #.
ALL CALL VOICE PAGE
Users can page all the internal and all the external paging zones at the same time by
dialing the All Page code. Keysets may be restricted from making or receiving pages in
system programming. A maximum of 30 keysets can be programmed to receive page
announcements.
ATTENTION TONE
To get your attention, a brief tone precedes all page announcements or intercom voice
calls. There are separate programmable duration timers for page and voice announce
tones.
AUTHORIZATION CODES
Authorization codes are used to give permission to make a call. These four digit autho-
rization codes can be either forced or voluntary. When used, authorization codes will
automatically change the dialing station’s class of service to the level assigned to the
authorization code. Authorization codes may or may not be programmed to print on
SMDR.
FORCED
When a station is programmed for forced authorization the user must always enter this
code before dialing is allowed. The dialed authorization code is verified from a system
list of 100 entries.
4.1.2 
						

							

4.1.3
VOLUNTARY
Any station user can always enter an authorization code before he/she begins dialing.
The dialed authorization code is verified from a system list of 100 entries.
AUTOMATIC HOLD
While a keyset user is engaged on an outside (C.O.) call, pressing another trunk key,
route key or CALL button automatically places the call on hold when this feature is
enabled. Pressing TRANSFER, CONFERENCE, PAGE or a DSS key will always auto-
matically place a C.O. call on hold. Intercom calls can only be automatically held by
pressing the TRANSFER or CONFERENCE keys. Each keyset user can enable or
disable automatic hold.
BACKGROUND MUSIC
Keyset users may choose to hear music through their keyset speakers when optional
external sources are installed. Each user may adjust this level by the use of a volume
control program at the selected keyset.
CALLER ID
This feature requires that optional software and hardware be installed in the DCS
COMPACT KSU. In addition, the Caller ID service must be provided by your local
telephone company. The availability of the calling party name or number depends on
the type of CID service offered by your local telephone company. The Caller ID feature
is dependent on having an LCD keyset to show the name or number in the top line of
the display.
NOTE: Requires optional hardware and/or software. Ask your dealer for details.
NAME/NUMBER DISPLAY
Each LCD keyset user can decide if he/she wants to see the CID name or CID number
in the display. Regardless of which one is selected to be seen first, the N/N key is
pressed to view the other piece of CID information.
NEXT CALL
In the event that you have a call waiting or a camped-on call at your keyset, you can
press the NEXT key to display the Caller ID information associated with this next call in
queue at your station. Either the CID name or CID number will show in the display
depending on your N/N selection.
SAVE CID NUMBER
At any time during an incoming call that provides CID information, you may press the
SAVE key. This saves the CID number in the Save Number feature. Pressing the
SAVE number redial key will dial the CID number. The system must be using LCR to
dial the saved number. 
						

							

STORE CID NUMBER
At any time during an incoming call that provides CID information, you may press the
STORE key. This saves the CID number as a speed dial number in your personal
speed dial list. The system must be using LCR to dial the stored number.
INQUIRE PARK/HOLD
Having been informed that an incoming call is on hold or has been parked, you may
view the Caller ID information before you retrieve the call. This will influence how you
choose to handle the call.
CID REVIEW LIST
This feature allows display keyset users to review CID information for calls sent to their
stations. This list can be from ten to fifty calls in a first-in, first-out basis. The list in-
cludes calls that you answered and calls that rang your station but that you did not
answer. When reviewing this list, you can press one button to dial the person back.
The system must be using LCR to dial the stored number.
INVESTIGATE
This feature allows selected stations with a special class of service to investigate any
call in progress. If CID information is available for an incoming call, you will know to
whom this station is speaking. On outgoing calls, you can see who was called. After
investigating, you may barge-in on the conversation, disconnect the call or hang-up.
WARNING: Barge-in without tone may violate state or federal laws concerning the right to
privacy. STA is in no way responsible for the misuse of this feature.
ABANDON CALL LIST (50)
The system has a system-wide abandon call list that stores CID information for the last
50 calls that rang but were not answered. The list is accessed using the system admin-
istrator passcode. When reviewing this list, you are provided options to CLEAR the
entry or DIAL the number. You can use the NND key to toggle between the CID name,
CID number and the date and time the call came in. The system must be using LCR to
dial numbers from the abandon call list.
CID ON SMDR
The Station Message Detail Records report can be set to include CID name and num-
ber for incoming calls. This format expands the print out to 113 characters. You must
use a wide carriage printer or an 80 column printer set to the condensed print option.
NUMBER TO NAME TRANSLATION (250)
The system provides a translation table for 250 entries. When the CID number is
received, the table is searched. When a match is found, the system will display the
corresponding name. This will allow users in areas that do not support deluxe Caller ID
to provide names for regular callers.
4.1.4