Samsung Dcs 400si General Description Manual

CONTENTS
2.12
64 Button Module (see Figures 2–16)
•64 programmable keys with red LEDs
•Available in almond or charcoal
•One to four can be assigned to any DCS keyset to provide additional programmable
keys
FIGURE 2–15
FIGURE 2–16     

CONTENTS
2.13
Door Phone Interface Module (DPIM) and
Door Phone (see Figures 2–17 and 2–18)
•The DPIM adapts any DLI circuit for use with
the door phone unit
•Commonly used to request entry through
locked doors (interior or exterior) or as a
room monitoring box
•Provides contact control to be used with cus-
tomer-provided electric door lock
•Door phone is wall-mounted
•Door phone is weather resistant
Serial Interface Module (SIM)
(See Figure 2–19)
•Provides an RS232 connection required for SMDR, PCMMC,...

CONTENTS
2.14
FIGURE 2–19
FIGURE 2–20
Computer Telephony Module (CTM)
(See Figure 2–20)
•Provides RS232 connection via DB9 to a PC for TAPI applications
•Connects to any DLI port and any DCS keyset     

CONTENTS
3.1
PART 3. SPECIFICATIONS
The following tables provide technical data for the DCS hybrid/key telephone system.
3.1 ELECTRICAL SPECIFICATIONS (DPCU)
AC INPUT 120 (85–135) VAC (57–63 Hz)*
240 (170–270) VAC (57–63 Hz)
FUSE RATING 5 AMPS/250V
DC INPUT 43–56 VDC
POWER CONSUMPTION157 WATTS MAX. PER POWER SUPPLY
FUSE RATING 5 AMPS/250V
BTU RATING (MAX) 535 BTU per Hr. per POWER SUPPLY
DC OUTPUT +5 VOLTS, 4.5 AMPS MAX
-5 VOLTS, 0.5 AMPS MAX
-56 VOLTS (-48 NOMINAL), 1.5 AMPS MAXIMUM
DC BATTERY CHARGING...

CONTENTS3.3ENVIRONMENTAL LIMITS
OPERATING TEMPERATURE 32–104 °F/0–40 °C
3.2
STORAGE TEMPERATURE -13–158 °F/-25–70 °C
HUMIDITY                                                                                        10–90 ° Non Condensing
3.4CABLE REQUIREMENTS
EQUIPMENT CABLE AWG MAX FEET MAX METERS
DIGITAL KEYSET 1 PR. TWISTED 24 1300 400
32 BTN MODULE 1 PR. TWISTED 24 1300 400
64 BTN MODULE 1 PR. TWISTED 24 1300 400
SINGLE LINE STATION 1 PR. TWISTED 24 3000 1 KM
DOOR PHONE 2 PR. TWISTED 24 330* 100
SIM 1...

CONTENTS
SYSTEM TONES
3.3
Ringback Tone—Indicates the station you dialed is ringing.
Busy Tone—Indicates the station you dialed is busy.
DND/No More Calls Tone—Fast busy tone indicates the station you
dialed is in the Do Not Disturb mode or cannot receive any more calls.
Transfer/Conference Tone—Indicates your call is being held and you can
dial another party.
Confirmation Tone—Very short beeps followed by dial tone indicate you
have correctly set or canceled a system feature.
Error Tone—A distinctive...

CONTENTS
3.4
3.6KEYSET LED INDICATIONS
CONDITION LED COLOR LED ON LED OFF
LINE IDLE OFF – OFF
LINE IN USE RED/GREEN STEADY –
RECALL AMBER 500 ms 500 ms
CALL ON HOLD RED/GREEN 500 ms 500 ms
RINGING C.O. CALL GREEN 100 ms 100 ms
RINGING INTERNAL CALL GREEN 100 ms 100 ms
DND INDICATION RED 112 IPM for 500 ms 500 ms
OPERATOR CALLS RED 100 ms 100 ms
ANS/RLS (DND)* RED 112 IPM for 500 ms 500 ms
ANS/RLS (HDSET MODE) RED STEADY –
TRSF (FORWARD ALL) RED STEADY –
*Overrides headset mode
3.7RESERVE POWER DURATION...

CONTENTS3.8SYSTEM CALL CAPACITY
BHCA 4,000
3.5 

CONTENTS
4.1.1
Account Code EntryForcedVoluntaryAll Call Voice PageAttention ToneAuthorization CodesForcedVoluntaryAuto Attendant†
Automatic HoldAutomatic Number Identification (ANI)Background MusicCADENCE–Integrated Voice MailCall CostingCaller Identification†
Automatic Number Identification (ANI)and Caller IDName/Number DisplayNext CallSave CID/ANI NumberStore CID/ANI NumberInquire Park/HoldCID/ANI Review ListInvestigateAbandon Call List (100)CID/ANI on SMDRNumber to Name Translation (1500)Call...

CONTENTS
4.1 SYSTEM FEATURE DESCRIPTIONS
ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up
from a call. This account code will appear in the SMDR printout for that call record.
Keyset users may enter this code using an account (ACCT) key without interrupt-
ing a conversation. Single line telephone users must temporarily interrupt the call
by hook-flashing and dialing the feature access code. Account codes can be up to
12 digits long.
FORCED
When forced, they...