Samsung CLX 8380ND User Manual

6.10   
5 Enter  Mailbox No.  and Passcode  which are set from Creating 
Mailbox in page 6.9.
6 Press  OK.
Faxing to a re mote Mailbox
To fax and store the originals in a recipients  Mailbox in this machine, you 
can use the  Send to Remote  feature.
1 Press  Fax from the  Main screen.
2 Place the originals face up in the DADF. Or you can use the scanner 
glass with a single original document face down.
3 Adjust the document settings in the  Image tab and the  Basic tab.
4 Press the  Advanced  tab >...

6.11   
8 Press  OK.
9 Press  End Time  and set the end date and time with left/right arrows.
10 Press  OK.
Adding documents to a reserved delay fax job
You can add additional documents to the delayed fax job which is saved 
in memory.
1 Press  Machine Setup  on the control panel.
2 Press  Admin Setting . When the login message pops up, enter 
password and press  OK. (Page 3.5)
3 Press the  Setup tab >  Fax Setup .
4 Press down arrow on the right side.
5 Press  Send Batch .
6 Press  On.
7 Press  OK....

6.12   
2 Press  Admin Setting . When the login message pops up, enter 
password and press  OK. (Page 3.5)
3 Press the  Setup tab >  Fax Setup .
4 Press down arrow on the right side.
5 Press  Fax Forward Settings  > Forward to Email Setting  > 
Receive Forward .
6 Press  Forward  and enter the  From and Destination Email  option 
using the keyboard on the display.
If you want the machine to print the report after forwarding a fax, set 
the  Forward & Print .
7 Press  OK.
Forwarding a sent fax to  other...

7.1   
7 Scanning
Scanning with your machine lets you turn hard copy originals into digital 
files.
There are two ways to scan originals, one is using the USB cable to 
directly connect the machine with your  computer, and the other is using 
the network scan feature which scans and  sends to a specific destination 
via the network.
If you want to use the USB cable to scan originals, refer to the Scanning 
part of Software section. Your machine offers the following ways to scan 
an image using a local...

7.2   
• Subject /Message : Subject and message of the email.
• Remove All : Erases everything in the input area.
• Address : Inputs the recipients address just by pressing stored 
addresses. You can store frequent ly used email addresses from 
your computer using the  SyncThru Web Service. (Page 7.5)
• Duplex : Selects whether the machine scans on one side of the 
paper ( 1 Sided ), both sides of the paper ( 2 Sided), or both sides of 
paper but back is rotated 180 degrees ( 2 Sided, Rotate Side 2).
•...

7.3   
User authentication for network scanning
To send an email, FTP, SMB or Ne twork, you must register authorized 
local or network users using SyncThru™ Web Service. 
• If user authentication has been acti vated, only authorized local users 
or on the DB server (SMB, LDAP, Kerberos) can send scanned data to 
the network (email, FTP, SMB).
• For network scanning using the aut hentication feature, you must 
register the network or local auth entication configuration using the  
SyncThru™ Web Service....

7.4   
Note
LDAP Referral : LDAP client will search referral server if the 
LDAP server has no data to reply to query and if the LDAP 
server has a referral server.
11 Select  Serach Name Order  that you desire.
12 Check the box next to   From: Field Security Options. 
Note
This option is only provided if you have selected the Network 
authentication option in the user  authentication setting. You 
may check this option if you want to search for information in 
a default email address group.
13 Click...

7.5   
The default port number is 25.
8 Check the box next to  SMTP Requires Authentication  to require 
authentication.
9 Enter the SMTP server login name and password.
10 Click  Apply .
Note
If the authentication meth od of SMTP server is 
POP3beforeSMTP, check the box next to  SMTP Requires 
POP3 Before SMTP  Authentication.
a.Enter the IP address in dott ed decimal notation or as a host 
name. 
b.Enter the server port number, fr om 1 to 65535. The default port 
number is 25.
Storing email addresses...

7.6   
2 Press the initial alphabet key of th e address you are looking for. Or 
press  Search  to specify the search criteria.
When the search is completed,  the screen displays the search 
results.
3 Press  From and enter your email address and press  OK.
4 Select the address you want in the right-hand pane, and the press 
To, Cc  or  Bcc  in the left-hand pane.
5 Press  Apply. Keep selecting addresses as many as you want.
6 Press  OK.
Entering email addresses by the keyboard
When you press the input...

7.7   
3 Press  Scan from the  Main screen.
Note 
 If the authentication message shows, enter User Name 
and Password. This message shows only when the network 
administrator has set  the authentication in SyncThru Web 
Service . (Page 11.9)
4 Press  NetScan .
5 When the authentication message pops up, enter 
ID and 
Password . 
ID and Password  that are which you have entered 
during the configuration of the  Network Scan program. (Page 7.6)
When login is completed, the screen shows the NetScan server...