Samsung CLX 8380ND User Manual

10.3   
Power Saver You can reduce energy consumption by setting 
these features. Power Saver has two options, 
first  Low Power Save  turns off the scanner 
lamp under the glass.  Power Save turns off the 
fans within the machine except a core fan for 
the fuser unit. (Page 3.6)
Tray 
Management This feature allows you to select the tray and 
paper you use for a printing job. Paper size, 
paper type, and paper color options are 
adjusted here. 
Tray Confirmation Message  is 
to activate the window...

10.4   
Copy Setup
For copy output, you can set up several options in advance.
1 Press  Machine Setup  on the control panel.
2 Press  Admin Setting . When the login message pops up, enter 
password and press  OK.
3 Press the  Setup tab > 
Copy Setup. 
OptionDescription
Page Number
If you select this option On, each copy will include 
the page number on the bottom of each page. 
Time & Date Set this option On in order to print the date and 
time on each copy, set from the  General tab.
ID Stamp This...

10.5   
Ring to Answer You can specify the number of times the 
machine rings before  answering an incoming 
call.
Receive Header Use this option to automatically print the page 
number, date and time of fax reception at the 
bottom of each page.
Secure Receive You may need to prevent your received faxes 
from being accessed by unauthorized people. 
This feature restricts printing of received faxes 
when the machine is unattended. If you select 
this option to On, all incoming faxes go into 
memory. 
A...

10.6   
Network Setup
You may set up the network with the machines touch screen. Before 
doing that, you must have the inform ation concerning the type of network 
protocols and computer system you use.  If you are not sure which setting 
to use, contact your network admini strator to configure this machine 
network. 
1 Press  Machine Setup  on the control panel.
2 Press  Admin Setting . When the login message pops up, enter 
password and press  OK.
3 Press the  Setup tab >  Network Setup ....

10.7   
OptionDescription
Authentication 
Mode Network 
Accounting It enables the authentication 
mode which is set from the Job 
Account menu in the 
SyncThru™ Web Admin 
Service
.
Foreign Device 
Interface When you install the optional 
FDI kit, select 
On to activate it.
• Job Timer : If there is not 
enough credit, you can set the 
machine to cancel a job right 
away or wait a designated 
amount of time for a deposit.
• Print Job Control : When it is 
enabled, the both computer 
printing and copying...

10.8   
Adjusting the color contrast
This menu allows you to adjust the color setting. 
1 Press  Machine Setup  on the control panel.
2 Press  Admin Setting . When the login message pops up, then enter 
password and press  OK.
3 Press the  Setup tab >  Color. 
OptionDescription
Custom Color This item allows you to adjust contrast, color by 
color. 
CMYK: Allows you to adjust  the contrast of the toner 
in each toner cartridge.
•  Default : Optimizes colors automatically. 
•  Manual Adjust : Allows you...

10.9   
Printing a report
You can print a report on the machines c onfiguration or font list, etcetera.
1 Press  Machine Setup  on the control panel.
2 Press  Admin Setting . When the login message pops up, then enter 
password and press  OK.
3 Press the  Print/Report  tab.
OptionDescription
Print You can print Network 
Configuration , PS3 Font List , PCL 
Font List  and Schedule Jobs 
Report . Schedule Jobs Report  
shows the job list in pending, in 
waiting, in delayed faxing or the 
Mailbox list as...

11.1   
11 Maintenance
This chapter provides information for maintaining your machine.
This chapter includes:
• Printing a machine report
• Monitoring the supplies life
• Finding the serial number
• Sending the imaging unit reorder notification
• Sending the toner  reorder notification
• Checking Stored Documents
• Cleaning your machine
• Maintaining the toner cartridge
• Redistributing toner
• Replacing the toner cartridge
• Replacing the imaging unit
• Replacing the waste toner container
• Maintenance...

11.2   
Sending the toner reorder notification
You can set the machine to alert you that the toner level is low and needs 
to be reordered.
1 Press  Machine Setup  on the control panel.
2 Press 
Admin Setting. When the login message pops up, then enter 
password and press 
OK.
3 Press the  General tab > Supplies Management  > Toner Cartridge 
Reorder Notification . 
4 Press  Toner Low Alert  to enable this option not, and press  To n e r  
Low Alert Level  to set the remained life level. 
5 Press 
OK....

11.3   
Maintaining the toner cartridge
Toner cartridge storage
To get the most from the toner cartri dge, keep the following guidelines in 
mind:
• Do not remove the toner cartridge fr om its package until ready for use. 
• Do not refill the toner cartridge.  The machine warranty does not cover 
damage caused by using a refilled cartridge.
• Store toner cartridges in the sa me environment as your machine.
• To prevent damage to the toner cartridg e, do not expose it to light for 
more than a few...