Samsung CLX 8380ND User Manual

11.4   
6 Hold the toner cartridge and ali gn it with the corresponding slot 
inside the machine. Insert it back  into its slot until it locks in place.
7 Close the front cover, then the side cover. 
8 Make sure that the cover is securely latched and then turn the 
machine on.
Caution
If the cover is not completely closed, the machine will not 
operate.
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each 
one: yellow (Y), magenta  (M), cyan (C), and...

11.5   
5 Remove the new toner cartridge from its bag. 
6 Thoroughly roll the new cartridge five or six times to distribute the 
toner evenly inside the cartridge.
Note
If toner gets on your clothing, wipe it off with a dry cloth and 
wash clothing in cold water. Hot water sets toner into fabric.
7 Hold the new toner cartridge by the handle and slide the new toner 
cartridge in until it locks in place.
8 Close the front cover, then the side cover. 
9 Make sure that the cover is securely latched and then...

11.6   
4 Pull the waste toner container out of the machine using its handle.
5 Turn the imaging unit locking levers outwards to release and open 
the inner cover.
6 Pull the used imaging unit out of the machine using the handle on its 
bottom.
7 Remove the new imaging unit from its bag. Caution
Don’t use sharp objects, such as a knife or scissors, to 
open the imaging unit package. You could damage the 
surface of the imaging unit.
8 Remove the paper protecting the  surface of the imaging unit.
9...

11.7   
11 Labels inside the machine identify each imaging unit’s position. 
Holding the handles on the new imaging unit, push the imaging unit 
until it locks in place.
12 Turn the imaging unit locking levers inwards until it locks in place 
and close the inner cover.
13 Insert the waste toner container into position and then push it to 
make sure that it is firmly seated in place.
14 Close the front cover, then the side cover. 
15 Make sure that the cover is securely latched and then turn the 
machine...

11.8   
4 Push the lock lever up and pull the waste toner container out.
Note
When you pull out the waste toner container out of the 
machine, move the container carefully not to drop it from 
your hands.
Make sure that you lay the waste toner container on a flat 
surface so that the  toner does not spill.
5 Remove the container’s cap from the container as shown below, 
and use it to close the waste toner container openings.
Caution
Do not tilt or turn over the container.
6 Take a new waste toner...

11.9   
Managing your machine from the website
If you have connected your machine to a network and set up TCP/IP 
network parameters correctly, you can manage the machine via 
Samsung’s  SyncThru Web Service , an embedded web server. Use 
SyncThru Web Service  to:
• View the device information  and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer properties.
• Set the machine to send email notifications and update you on the  machine’s...

12.1   
12 Troubleshooting
This chapter gives helpful information on what to do if you encounter a 
problem.
This chapter includes:
• Tips for avoiding paper jams
• Clearing document jams
• Clearing paper jams
• Understanding display messages
• Solving other problems
Tips for avoiding paper jams
By selecting the correct media types,  most paper jams can be avoided. 
When a paper jam occurs, follow the steps outlined on page 12.3. 
• Follow the procedure on page 4.7.  Ensure that the adjustable guides...

12.2   
Misfeed of exiting paper
1 Remove the remaining documents from the DADF.
2 Open the DADF cover.
3 Open the document input tray upwards and pull the document 
gently out of the DADF.
4 Close the DADF cover and the document input tray. Then place the 
documents back in the DADF.
Roller misfeed
1Open the scanner lid.
2 Grasp the misfed paper, and remove  the paper from the feed area 
by carefully pulling it to the right using both hands.
if you do not see the paper in this area, stop and go to step...

12.3   
4 Remove the paper from the feed area by carefully pulling.
5 Close the white document background and the scanner lid. Then 
load the removed pages back into the DADF.Clearing paper jams
When a paper jam occurs, the warming message appears on the display 
screen. Refer to the table below to locate and clear the paper jam.
Caution
To avoid tearing the paper, pull the jammed paper out gently 
and slowly. Follow the instructions in the following sections to 
clear the jam. 
In the tray 1
1Open the...

12.4   
2 Open the guide in the direction shown.
3 Carefully remove the misfed pa per in the direction shown.
If the paper does not move when y ou pull, or if you do not see any 
paper in this area, stop and go to step 4.
4
Lift the front part of the tray up sl ightly to release the tray from the 
machine. 
5 Remove the jammed paper by gently pulling it straight out.
Once you remove the jammed paper here, open the side cover and 
then close it to clear the error message on the display.
6 Close the side...