Runco X 200i Projector User Manual

Installation
Runco X-200i Series Installation/Operation Manual 45 
PREL
IMINARY
Whitney (Prismatic) 
Anamorphic Lens 
Installation and 
Adjustment
The Whitney Anamorphic lens mount kit consists of everything shown in Figure 3-20. 
Some components shipped with your projector may differ slightly from what is shown in 
these instructions. 
Figure 3-20. Prismatic Anamorphic Lens Mounting Assembly - Exploded View
1. Use the Height/Pitch Adjustment Screws (3) and Washers (2) to attach the Lens 
Mounting...

Installation
46 Runco X-200i Series Installation/Operation Manual
PREL
IMINARY
Adjusting the Lens Height and Angle: 
1. Project a white field on the screen.
2. Loosen the four Height/Pitch Adjustment Screws just enough to allow vertical 
movement of the lens assembly.
3. Slowly move the anamorphic lens into place so that there are no shadows on the top 
or bottom of the screen:
4. Then, adjust the anamorphic lens angle so that the projected image is rectangular:  
  
The anamorphic lens will almost...

Installation
Runco X-200i Series Installation/Operation Manual 47 
PREL
IMINARY
Adjusting the Horizontal Position and Yaw: 
1. Project a white field on the screen.
2. Release the Swell Latches to allow the lens assembly to pivot and move freely from 
side to side.
3. Slowly move the anamorphic lens into place (from right to left or vice versa) so that 
there are no shadows on either side of the screen: 
 
 
4. Angle the lens to even out any left-right pincushion distortion:  
5. When the horizontal...

Installation
48 Runco X-200i Series Installation/Operation Manual
PREL
IMINARY
Notes: 

Operation
Runco X-200i Series Installation/Operation Manual 49 
PREL
IMINARY
4.1 
Selecting Video 
Memory
Press ISF NIGHT, ISF DAY, CUST1 or CUST2 to recall settings from a 
memory preset. Then, press ENTER to confirm your selection. Or, to cancel the 
operation, press 
 to select Cancel and press ENTER. 
4.2 
Selecting an Aspect 
Ratio
To select the appropriate aspect ratio for the type of program 
material being viewed, press one of the aspect ratio buttons. Or, 
press the aspect ratio (
) button...

Operation
50 Runco X-200i Series Installation/Operation Manual
PREL
IMINARY
4.4 
Using the On-Screen 
Menus
1. Press the MENU button on the remote 
control or system keypad to display the 
Master Menu. 
2. There are six menus. Press  or  to 
select a sub-menu, then press ENTER 
(remote control unit) or SELECT 
(system keypad).
3. Press  or  to select a sub-menu 
item.
4. For each sub-menu item, the 
currently-selected value appears in 
white text or is otherwise highlighted. 
Press 
 or  to choose a...

Operation
Runco X-200i Series Installation/Operation Manual 51 
PREL
IMINARY
Figure 4-1. X-200i OSD Menu Structure
Main
Aspect Ratio16:9, Letterbox, 4:3, 
VirtualWide, Cinema or Virtual 
Cinema
MemoryRecall Memory
Save Memory
Save ISF
OverscanOff, Crop or Zoom
3D Control3D Mode
Enable DLP Link
L-R Swap
Dark Time
Sync Delay
1080p24 Output
3D Test Pattern
Input SelectHDMI 1, HDMI 2, Comp. 1, 
Comp. 2 or RGB
Resync (press ENTER to execute)
Image
Brightness
0 ... 100 ... 200 Contrast
Color
Tint
Sharpness
0...

Operation
52 Runco X-200i Series Installation/Operation Manual
PREL
IMINARY
MainThe X-200i Main Menu, shown in Figure 4-2, provides access to the most 
commonly-used projector functions. 
Figure 4-2. X-200i Main Menu
➤ 

Operation
Runco X-200i Series Installation/Operation Manual 53 
PREL
IMINARY
Aspect Ratio: To change the aspect ratio (size and shape) of the projected image, press 
 or  to highlight Aspect Ratio. Use the  or  buttons to select the appropriate 
aspect ratio for your screen size, installed lens configuration and the type of program 
material being viewed, then press ENTER; refer to Table 4-1. 
Table 4-1. Aspect Ratio Settings 
Aspect 
Ratio 
Setting
Description
Aspect 
Ratio of 
Source 
SignalGeometry of...

Operation
54 Runco X-200i Series Installation/Operation Manual
PREL
IMINARY
Letterbox
With a 16:9 source 
image, Letterbox mode 
crops the top and 
bottom portion of the 
image and vertically 
stretches the remaining 
portion to fill a 16:9 
image area. 
 
 
It scales (zooms in on) a 
4:3 image linearly (by the 
same amount on all 
sides) to fill a 16:9 
display. 
16:9
4:3
Virtual-
Wide
A 16:9 image is shrunk 
horizontally in the center 
and stretched 
horizontally in a 
NON-linear fashion (more 
on the...