Home > Runco > Projector > Runco Vx 6000d Projector User Manual

Runco Vx 6000d Projector User Manual

Here you can view all the pages of manual Runco Vx 6000d Projector User Manual. The Runco manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 91

Runco VX-6000d Owner’s Operating Manual 79 
PREL
IMINARY
6.1 
RS-232 Connection 
and Port Configuration
To interface the DHD Controller with a home theater automation/control system or a PC 
running terminal emulation software, connect it to your control system or PC as shown in 
Figure 3-13. 
Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop 
bit and no flow control. Set the baud rate to 19200, to match that of the DHD Controller 
RS-232 port. 
6.2 
Serial...

Page 92

Serial Communications
80 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Input Selection Commands
COMPONENTNAYESSelects the Component input
COMPOSITENAYESSelects the Composite video input 
HDMI1NAYESSelects the HDMI 1 input 
HDMI2NAYESSelects the HDMI 2 input 
HD1NA YESSelects the RGB HD 1 input
HD2NA YESSelects the RGB HD 2 input
INPUT?NANAReturns active input
SVIDEO1NAYESSelects the S-Video 1 input
SVIDEO2NAYESSelects the S-Video 2 input
Aspect Ratio Commands
ANAMORPHICNAYESSelects the Anamorphic...

Page 93

Serial Communications
Runco VX-6000d Owner’s Operating Manual 81 
PREL
IMINARY
Picture Adjust Commands (not available on HDMI 1 or HDMI 2 inputs)
BRIGHTNESS-100/100YESSets a value for brightness
BRIGHTNESS?NANAReturns brightness setting value
CHROMADELAY-12/12YESSets a value for input color chroma delay
CHROMADELAY?NANAReturns input color chroma delay setting
COLOR-100/100YESSets a value for color
COLOR?NANAReturns color setting value
CONTRAST-100/100YESSets a value for contrast
CONTRAST?NANAReturns...

Page 94

Serial Communications
82 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Input Position Commands (not available on HDMI 1 or HDMI 2 inputs)
IHEIGHT-100/100YESSets the value for input height
IHEIGHT?NANAReturns input height value
IHPOS-100/100YESSets a value for horizontal input position
IHPOS?NANAReturns input horizontal position value
IVPOS-100/100YESSets a value for vertical input position
IVPOS?NANAReturns input vertical position value
IWIDTH-100/100YESSets the value for input width...

Page 95

Serial Communications
Runco VX-6000d Owner’s Operating Manual 83 
PREL
IMINARY
Miscellaneous Commands
BKGND-100/100YESSets the background color for 4:3 aspect 
ratio (-100 = black; 100 = white)
BKGND?NANAReturns background setting value
DATE?NANAReturns projector manufacture date
HDINPUTRESNAYESSets YPbPr input resolution and refresh 
rate for HD1/HD2, as follows:
0 = 480i
1 = 480p
2 = 576i
3 = 576p
4 = 720p / 60 Hz
5 = 1080i / 60 Hz
6 = 720p / 50 Hz
7 = 1080i / 25 Hz
Any other value = Auto...

Page 96

Serial Communications
84 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using 
the IR remote only you’ll be doing so via serial commands. These commands provide active OSD 
responses just like the IR remote. 
DOWNNANADown-Arrow () key
ENTERNANAENTER key
LEFTNANALeft-Arrow () key
MENUNANAMENU
RIGHTNANARight-Arrow...

Page 97

Runco VX-6000d Owner’s Operating Manual 85 
PREL
IMINARY
7.1 
VX-6000d 
Specifications
Table 7-1 lists the VX-6000d specifications.  
7. Specifications
Table 7-1. VX-6000d Specifications 
Projector Type:Digital Light Processing (DLP), single-chip, 16:9 SuperOnyx™ 
DMD
Native Resolution:1920 x 1080 (16:9)
Aspect Ratios:Refer to Table 7-2 
Video Standards:Refer to Table 7-2 
DTV Compatibility:480p, 720p, 1080i, 1080p
Scan Frequency:Horizontal: 15 - 81 kHz 
Vertical: 43 - 100 Hz
Picture Size (16:9...

Page 98

Specifications
86 Runco VX-6000d Owner’s Operating Manual
PRELI
MINARY
Brightness and Contrast 
(variable, depending on 
RVR calibration):Cinema Standards Measurement System (CSMS) 
Specifications
- Brightness: 17.2 to 29.7 foot-Lamberts (fL)
- Contrast Ratio: 232:1 to 255:1
These measurements are taken from the projector in a controlled, 
home theater environment. All measurements are made to 
ANSI/NAPM IT7.228-1997 specifications using the Photo Research 
PR-650 SpectraColorimeter and Minolta LS-100...

Page 99

Specifications
Runco VX-6000d Owner’s Operating Manual 87 
PREL
IMINARY
7.2 
DHD Controller 
Specifications
Table 7-2 lists the DHD Controller specifications.  
Table 7-2. DHD Controller Specifications 
Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema, 
VirtualWide 2.35
Video Standards:NTSC, PAL
Output Resolution:720p
Inputs: (1) Composite; (2) S-Video; (1) Component; (2) HD-R (Pr), G 
(Y), B (Pb), H, V; (2) DVI with HDCP
Outputs: (1) HD/RGBHV
(1) DVI-I with HDCP
Control Options:-...

Page 100

Specifications
88 Runco VX-6000d Owner’s Operating Manual
PRELI
MINARY
7.3 
VX-6000d Dimensions
Figure 7-1 shows the VX-6000d dimensions (all dimensions are in inches). 
Figure 7-1. VX-6000d Dimensions
0
4.895
12.379
20.870
26.304
8.935
8.185
1.015
0
2.235
5.036 (3x)
15.012 (3x)
18.635
0 24.069
15.591 (2x)
11.341 (2x)
7.091 (2x)
2.23527.804
8.629
Front Jewelry
opening dia.
Ø 6.475
Front ViewTop View Side View
Bottom View 
Start reading Runco Vx 6000d Projector User Manual

Related Manuals for Runco Vx 6000d Projector User Manual

All Runco manuals