Runco Vx 6000d Projector User Manual

Runco VX-6000d Owner’s Operating Manual 49 
PREL
IMINARY
4.1 
Using the On-Screen 
Menus
Press the MENU button on either the remote control or the DHD Controller front panel to 
display the Main Menu. 
To select a menu item, use the  and  buttons on either the remote control or the DHD 
Controller front panel to highlight it. Press ENTER to confirm your selection. 
The VX-6000d OSD menus are arranged hierarchically; exactly how they are arranged 
depends on the input signal resolution. For 1080i digital...

Operation
50 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Figure 4-1. DHD Controller OSD Menu Structure for VX-6000d (1080i Analog and Lower-Resolution Sources)
Service
Test VideoGrey Bars 1
Grey Bars 2
Color Bars 1
Color Bars 2
Input Names Rename, Restore or Save
Remote ControlPrimary
Secondary
Analog Out Mode RGB--, RGB++ or RGBS
Display Device ConfigureOrientation
Overscan
Lamp Power
(0 = Low; 1 = High)
Fan Mode
(0 = Normal; 1 = High Altitude)
Lamp Hours
HD FormatHD/RGB 1
Auto, RGB or YUV...

Operation
Runco VX-6000d Owner’s Operating Manual 51 
PREL
IMINARY
Main MenuThe Main Menu is the starting point for accessing all projector functions. 
(The Calibration and Service menus are hidden and not accessible until you enter a 
passcode.) 
Input SourceFrom the Main Menu, select Input Source to choose a video signal source. 
The active source is indicated by an arrow (>) to its left; in the example at right, Composite 
is the active source. 
Aspect Ratio To change the aspect ratio (size and shape)...

Operation
52 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Table 4-1. Aspect Ratio Settings 
Aspect RatioDescription
AnamorphicSelect Anamorphic to view 16:9 DVDs and 
HDTV programs in their native aspect ratio. 
4:3 images are stretched horizontally to fit a 
16:9 screen. 
Standard 4:3Standard 4:3 scales the input signal to fit in 
the center of the 16:9 screen. 4:3 is the 
aspect ratio used by computer monitors, 
standard television programming and most 
VHS video cassettes. 
LetterboxIn...

Operation
Runco VX-6000d Owner’s Operating Manual 53 
PREL
IMINARY
Picture Use the controls in the Picture Menu to calibrate your VX-6000d for optimum picture 
quality.
The VX-6000d has been designed to incorporate setup and calibration standards 
established by the Imaging Science Foundation (ISF). The ISF has developed carefully 
crafted, industry-recognized standards for optimal video performance and has 
implemented a training program for technicians and installers to use these standards to 
obtain...

Operation
54 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Although it may be possible to obtain satisfactory picture quality using the naked eye and 
regular program material, Runco recommends using the following calibration tools for best 
results: 
 External test pattern source -- Ovation Multimedia, Digital Video Essentials or AVIA test 
DVD or equivalent.
 A blue filter (provided with many test DVDs), for color level and tint adjustments.
Connect your test pattern source to the input that...

Operation
Runco VX-6000d Owner’s Operating Manual 55 
PREL
IMINARY
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the 
one shown in 
Figure 4-3. 
Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast and press ENTER. Adjust the contrast to a point just below which the 
white rectangle starts to increase in size.
Color Saturation: On your external test pattern source, select a color bar pattern like the 
one shown in 
Figure 4-4. 
Figure 4-4....

Operation
56 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Select Color and press ENTER. While looking at the color bar pattern through a blue filter, 
adjust the color saturation level until the outermost (gray and blue) color bars appear to be 
a single shade of blue: 
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image. 
When tint is decreased, the image appears redder; when it is increased the image 
appears greener. To set the tint, select Tint and...

Operation
Runco VX-6000d Owner’s Operating Manual 57 
PREL
IMINARY
Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust 
sharpness, select Sharpness from the Picture menu and press ENTER. On your external 
test pattern source, select a pattern like the one shown in 
Figure 4-5. Adjust as needed, 
looking for white edges around the transitions from black to gray and differently-sized lines 
in the “sweep” patterns at the top and bottom. Lower the sharpness setting to...

Operation
58 Runco VX-6000d Owner’s Operating Manual
PREL
IMINARY
Overscan: Image Overscan pushes the outside edge of the active picture area of the 
video signal out beyond the edge of the display area. 
Some television programs are produced based on the assumption that older television 
sets may not display the outer edges of the broadcast picture area. Overscan effectively 
trims away these inactive, outer edges and enlarges the remaining portion of the image to 
fill the display area.
Select from 1%...