Runco Cl 810 Ultra Projector User Manual

Installation
Runco CL-810 Series Owner’s Operating Manual 19 
PREL
IMINARY
Figure 3-4. Horizontal Lens Shift
0%Screen Center
100% Width Lens Shift
(1.0 x W)
50% Width Lens Shift 
(0.5 x W) 150% Width Lens Shift
(1.5 x W)
Screen Width (W)
Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular 
lens is used in this example. 

Installation
20 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
Table 3-4 lists the lens shift limits for each available CL-810 lens, as percentages and 
absolute measurements with a 100 x 56 inch (1.78:1) screen. 
Table 3-4. Vertical and Horizontal Lens Shift Limits 
Lens Option
CL-810CL-810 Ultra
--Proteus 
AProteus 
BProteus 
CProteus 
DProteus 
EProteus 
F
Lens Shift Limits, as Percentages of Screen Height or Width (Notes 1 and 2)
Vertical
(Note 2)Up50%2%11%10%13%14%20%...

Installation
Runco CL-810 Series Owner’s Operating Manual 21 
PREL
IMINARY
Folded OpticsIn rear-screen applications where space behind the projector is limited, a mirror may be 
used to fold the optical path, as shown in 
Figure 3-5. The position of the projector and 
mirror must be accurately set. If you are considering this type of installation, contact your 
dealer for assistance.
Figure 3-5. Folded Optics
Other ConsiderationsOther considerations and tips that can help improve your installation:
...

Installation
22 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
3.5 
Mounting the CL-810
There are several methods for mounting the projector. Depending on your chosen 
installation, one method may be more suitable than another. 
Floor MountingIn typical front and rear screen installations, the projector can be mounted to a secure and 
level surface such as a table or cart. Carts are useful when moving a projector during a 
presentation or from site to site. If possible, lock the wheels when...

Installation
Runco CL-810 Series Owner’s Operating Manual 23 
PREL
IMINARY
3.6 
Connections to the 
CL-810
Proceed as follows to connect the CL-810 to your video sources, external controller(s) -- if 
present -- and AC power.
When connecting your equipment:
 Turn off all equipment before making any connections.
 Use the correct signal cables for each source.
 Ensure that the cables are securely connected. Tighten the thumbscrews on 
connectors that have them.
Connector Panel AccessTo access the...

Installation
24 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
Connecting Source 
Components to 
the 
CL-810
If your installation does not include an SDC-1: Connect your video sources to the 
CL-810 as shown and described in the sections that follow. 
HDMI/DVI Connections: See Figure 3-7. With an HDMI source, use the included 
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable. 
Figure 3-7. HDMI/DVI Source Connections
➤
Use the HDMI input whenever possible. This ensures...

Installation
Runco CL-810 Series Owner’s Operating Manual 25 
PREL
IMINARY
RGB Connections: Connect your personal computer or other RGB source (DVD player 
or HD set top box) to the COMP 2/RGB input; see 
Figure 3-8. You can use the included 
DB15HD-to-5 x BNC cable if your RGB source has a 15-pin, VGA-type connector. 
Figure 3-8. RGB Connections
Progressive Component Video Connections: Connect your progressive component 
source (DVD player or HD set top box) to the COMP 2/RGB input as shown in 
Figure...

Installation
26 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
Composite/S-Video/Component Video Connections: Use the included cables to 
connect your composite, S-Video and SD (480i) component video sources to the CL-810 
as shown in 
Figure 3-10. 
Figure 3-10. Composite, S-Video and Component Video Connections
S-VID /S-VID
DTV Source, 
DVD Player, VCR,
Satellite Receiver
etc. 

Installation
Runco CL-810 Series Owner’s Operating Manual 27 
PREL
IMINARY
RS-232 Controller 
Connection 
Connect a PC or home theater control/automation system (if present) to the RS-232 port 
on the CL-810; see 
Figure 3-11. Use a standard, 4-wire RJ-11 telephone cable, wired 
straight-through.
For more information about using this connection, refer to Serial Communications on 
page 53.
Figure 3-11. RS-232 Control System Connection
S-VID /S-VID
123457896
D-Sub 9-pin female RJ-11 MaleRJ-11 to
D-Sub...

Installation
28 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
Connecting 12-Volt 
Trigger Output to External 
Theater Components 
If your CL-810 is equipped with a CineWide with AutoScope system, or if your home 
theater contains other devices that respond to 12-volt triggers (such as a retractable 
screen or screen mask), connect it to the 12-volt trigger output as shown in 
Figure 3-12. 
Figure 3-12. Connecting 12-Volt Trigger Outputs
Connecting to AC PowerThe CL-810 ships with various...