Runco Cl 810 Ultra Projector User Manual

Runco CL-810 Series Owner’s Operating Manual xi 
1List of Figures
2-1. CL-810 Front/Side/Top View ........................................................................................ 5
2-2. CL-810 Rear/Bottom/Side View ................................................................................... 6
2-3. CL-810 Rear Panel ....................................................................................................... 7
2-4. CL-810 Remote Control...

List of Figures
xii Runco CL-810 Series Owner’s Operating Manual
Notes: 

Runco CL-810 Series Owner’s Operating Manual 1 
PREL
IMINARY
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco CL-810 
Series Digital Light Processing (DLP™) Projectors. This product family consists of the 
CL-810 and the CL-810 Ultra Projectors, each of which are available with a variety of 
optional upgrades. 
Throughout this manual, the Runco CL-810 Series DLP Projectors are referred to 
collectively as the “CL-810.” Except where noted, the features and...

Introduction
2 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
Graphic Conventions: These symbols appear in numerous places throughout the 
manual, to emphasize points that you must keep in mind to avoid problems with your 
equipment or injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
1.3 
Related Documents
The following are related Runco documents:
 Runco SDC-1 System Expansion Device Owner’s Operating Manual 
TIPS highlight...

Introduction
Runco CL-810 Series Owner’s Operating Manual 3 
PREL
IMINARY
1.4 
Description, Features 
and Benefits
The CL-810 Series DLP Projectors offer the astounding picture quality and versatility 
heretofore associated with more expensive projectors. Their 1280 x 720 native resolution 
DLP light engine features Runcos powerful SuperOnyx™ technology for bright, pristine 
high-definition images.
Contrast ratio and dynamic range extend to new heights with Runcos exclusive 
Reflectance Volume...

Introduction
4 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
Key Features and BenefitsThe CL-810 offers these key features and benefits: 
 Native Resolution: 1280 x 720 (16:9 Native Aspect Ratio) 
 DLP system using SuperOnyx™ Digital Micromirror Device (DMD)
 8-segment, 5x color wheel produces wide dynamic range and rich grayscale
 Reflectance Volume Regulation (RVR™) provides for infinitely variable adjustment of the 
light path through the optics, enabling the perfect balance of black...

Runco CL-810 Series Owner’s Operating Manual 5 
PREL
IMINARY
2.1 
CL-810 at a Glance
Figure 2-1 and Figure 2-2 show the key CL-810 components. 
Figure 2-1. CL-810 Front/Side/Top View
1.RUNCO LOGO 
The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) 
or upright. To rotate the logo, grip it at the sides, pull it away from the projector and 
rotate it 180 degrees. 
2.PROJECTION LENS
3.TOP IR SENSOR
4.TEMP LED 
Indicates fan status and internal temperature as follows:
 Off...

Controls and Functions
6 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
6.POWER/STANDBY LED 
Indicates power status as follows:
 Orange when the projector is in standby mode
 Flashes orange for 45 seconds after the projector is turned on to indicate that the 
lamp is warming up
 Green during normal operation
 Flashes green for 110 seconds after the projector is turned off to indicate that the 
lamp is cooling down
7.LAMP LED 
Indicates lamp status as follows:
 Off during normal operation...

Controls and Functions
Runco CL-810 Series Owner’s Operating Manual 7 
PREL
IMINARY
4.LAMP MODULE COVER 
Remove this cover to access the lamp compartment.
5.FRONT/REAR ADJUSTERS 
Use these to adjust the projector height or projection angle.
6.CEILING MOUNT HOLES  
Use these to attach the ceiling bracket to the projector.
2.2 
CL-810 Rear Panel
Figure 2-3 shows the CL-810 rear panel.
Figure 2-3. CL-810 Rear Panel
1.HDMI (Digital) 
HDCP-compliant digital video input for connecting a DVD player or HD tuner...

Controls and Functions
8 Runco CL-810 Series Owner’s Operating Manual
PREL
IMINARY
3.COMP 1 (RCA connectors) 
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for 
component video from sources such as DVD players.
4.COMPOSITE VIDEO INPUT 
Standard composite video input for connecting a VCR, laser disc player or other 
composite video source.
5.S-VIDEO  
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS 
(S-VHS) VCR. 
6.POWER INPUT (100 to 240...