Ricoh Projector PJ X5580 User Manual

69
Click the "Auto Search" button.
List of PJLink compatible projector in the network will be 
displayed. Select the projector you want to control, and then 
click the “Register” button.
Return to the previous screen by clicking the [OK] button.
English 
English
LAN Control
English   

70
The registered projector will be displayed.
2. Registering a projector by directly entering the IP address.
Upon entering the IP address of the projector and clicking the 
"Confirm" button, the projector name will be displayed. If there 
is no problem, click the [Register] button. Projector will be 
registered.
Return to the previous screen by clicking the [OK] button. 
English
LAN Control   

71
Controlling the projector with the projector 
management utility
To control the projector, switch to remote control screen by 
pressing the "Remote Control" tab. Select the projector (/ group)
that you want to control from displayed list and control with the 
button at the bottom of the screen.
[Power] button
Turn "on/off" the power of the projector and group selected 
from the projectors (/ group) list.
[Input Switch] button
Change the input of projector and group selected from the...

72
[Mute] button
Turn "on/off" the mute function of the projector and group 
selected from the projectors (/ group) list. This device supports 
mute of video only or audio only. Therefore, mute will change 
upon selecting video or audio.
[Information] button
Detailed information screen for the selected projector will be 
displayed. 
English
LAN Control   

73
Controlling the projector with the projector 
management utility via PJ Link
1. Open the web page and select General Setup. Then configure 
PJ Link settings.
- On the PJLink Password option, click Enable to enable this 
function.
- On the Current password field, enter the current password.
- On the New password and Confirm password fields, enter the 
new password.
When done, click Apply to save the settings.
English 
English
LAN Control
English   

74
2. Open the PJ Link software and click Register Projector.
3. Click Auto search. List of PJLink compatible projectors in the 
network will be displayed. 
English
LAN Control   

75
4. Select the projector you want to control and click Register. 
When prompted, enter your password.
If the password verification is successful, the "unlock" icon will 
appear on the screen.
English 
English
LAN Control
English   

76
Problem: No image appears on screen
  Ensure all the cables and power connections are correctly and 
securely connected as described in the “Connecting the Projector” \
section.
 Ensure the pins of terminals are not crooked or broken.
  Check if the projection lamp has been securely installed. Refer to 
the “Replacing the lamp” section for more information.
  Make sure you have removed the lens cap and the projector is 
switched on.
  Ensure that the “AV Mute” feature is not turned on.
Problem:...

77
Problem: The screen of the Notebook computer is not 
displaying a presentation
 If you are using a Notebook PC:
   Some Notebook PCs may deactivate their own screens when a 
second display device is in use. Each has a different way to be 
reactivated. Refer to your computer’s documentation for detailed 
information.
Problem: Image is unstable or flickering
  Adjust the “Phase” or “Clock” to correct it. Refer to the  
“H. Position” or “V. Position” section for more information.\
   Check and...

78
Problem: Image is reversed
   Select “SCREEN > Projection Mode” from the OSD menu to 
adjust the image.
Problem: Lamp burns out or makes a popping sound
   When the lamp reaches its end of life, it will burn out and may 
make a loud popping sound.  If this happens, the projector will 
not turn on until the lamp module has been replaced. To replace 
the lamp, follow the procedures in the “Replacing the Lamp”. 
English
Troubleshooting