Ricoh Projector PJ X5580 User Manual

59
General Settings
You can change the projector name and password with this item.
 ►Changing projector name. 
Enter the new projector name in the projector name field. 
Click “reflect”.
 ►Changing the password. 
Enter the current password in the current password field. 
Enter the new password in both the “new password field” and 
“new password (confirm)” fields. 
Click “projection”.
Control
You can control the projector with this item.
The items for control are described in this section.
	The projector...

60
Control button: When you click a button, the corresponding function 
will be performed.
Power ONThe power of the projector turns on.
To turn ON, click "Settings" → "Network 
(standby)".
Power OFFTurns OFF the power of the projector.
Auto SetThe RGB signal from the computer is 
automatically adjusted.
InputThe input signal of the projector changes to 
the next signal.
Function button: When you click a button, the corresponding 
function will turn ON/OFF.  (Function of the time of ON is...

61
VolumeAdjust the volume by +/- button.
Value will return to the initial value when you 
click the Reset button.
No Signal 
Power Off
Select from the pull-down list the time to 
automatically turn off the power after signal 
is displayed. Power turns off automatically if 
you select Off.
Lamp powerSwitch the power of lamp.
AspectSwitch the aspect ratio.
Network Settings
Set the network of the projector.
 ►Automatically configuring the network settings from DHCP.
Check automatic setting and then click...

62
Alert Settings
You can send email alerts when an error occurs.You can carry out settings for alert mail in this section.
 ►Alert types 
Check the type of error for which you want to send alert mail.
 ►Alert mail notification 
Check and perform the following settings.
 ►SMTP Settings
• Set the following
• SMTP: Server address (server name) (SMTP server)
• From: e-mail address of the sender
• User name: User name of the mail server
• Password: Mail server password
 ►E-mail Settings
• Subject
• Contents...

63
Enter the IP address of projector in *xxx.xxx.xxx.xxx.
Email Test
When you click [Email Test], test email will be sent.
The text will be "Email Test xxx.xxx.xxx.xxx *".
Even if an error occurs during the e-mail transmission, no error will appear in the web browser.
Crestron
You can use the control of projectors that uses Crestron.
 ►Power: Switch ON/OFF the power.
 ►Source List: Correspondence between the input display and 
input terminal of the device is as follows.
• VGA1: Computer1
• VGA2:...

64
Crestron Tools
You can perform settings of the projector network and Crestron 
Room View.
Crestron Info
You can display information about the firmware version of the 
projector and status of the lamp.
	After setting the user password, you will be able to access Crestron’s page by entering the password.
	After enabling the Admin password, you will be able to access the page of Crestron tool only upon entering the Admin password.
Note 
English
LAN Control   

65
Contacting the IT administrator of Crestron
You can contact the IT administrators who are using X-Panel.
Reset to Default
You can reset the network to factory settings. Press the reflect 
button.
	Crestron offers the following two types of files.a)RoomViewExpress _6_3_3_7.exe
b)Xpanel.exe
Note
English 
English
LAN Control
English   

66
Reboot System
You can restart the system.
Press the restart button. 
English
LAN Control   

67
Controlling the Device via the 
Projector Management Utility
Projector management utility
Projector management utility conforms with the standards 
of PJ Link class 1, and supports all the commands of class 1. 
One computer can manage up to 100 projectors connected to a 
network.
The operating environment of Projector Management Utility is 
as follows.
• Supported OS
• Windows Vista Ultimate / Business / Home Premium / 
Home Basic (32bit /64bit)
• Windows 7 Home Premium / Professional /Ultimate /...

68
3. Right-click the CD-ROM icon, and then select [Open].
4. Open the "Projector Management Utility" folder in the CD-ROM.
5. Double-click the setup.exe file in "Projector Management Utility" 
folder.
6. Follow the instructions on the screen and perform the installation.
7. When the installation is complete, click "Finish".
Shortcut icon will be created on the desktop.
Registering a projector
1. Registering a projector with automatic search
Click the "Projector...