Ricoh Projector PJ X5580 User Manual

39
PICTURE
 Picture Mode
  There are many factory presets optimized for various types of 
images. The available options: 
  Bright: Mode for emphasizing brightness.
   Standard: Mode for optimizing the balance between brightness 
and color reproduction.
  Natural: Mode for emphasizing color reproduction.
   Presentation: This mode is suitable for showing PowerPoint 
presentations when the project is connected to the PC.
   User: User defined settings.
  Wall Color
  Use this function to obtain an...

40
 Contrast
  The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
Contrast
  Press  the  key to decrease the contrast.
  Press the  key to increase the contrast.
 Sharpness
 Adjust the sharpness of the image.
Sharpness
  Press the  key to decrease the sharpness.
  Press the  key to increase the sharpness.
 Saturation
  Adjust the color saturation of the image.
Saturation
 ...

41
SCREEN
 Aspect Ratio
 Use this function to choose your desired aspect ratio.
   Auto: Automatically selects the appropriate display format. 
When input is 4:3, the image is displayed as 4:3. When input is 
16:9 above, the image is displayed as 16:9.
   4:3: Displays 4:3 aspect ratio.
   16:9: Displays 16:9 aspect ratio.
 Phase
   Eliminate flicker from the image displayed. Use the  or  key to 
adjust the value. 
Phase
 Clock
   Adjust the number of total dots in one horizontal period. Use the  
or...

42
 H. Position (Horizontal Position)
 Shift the projected image position horizontally.
H. Position
  Press the  key to move the image left.
  Press the  key to move the image right.
 V. Position (Vertical Position)
 Shift the projected image position vertically.
V. Position
  Press the  key to move the image down.
  Press the  key to move the image up.
 Digital Zoom
 Adjust the digital zoom ratio of the projected image.
Digital Zoom
  Press the  key to reduce the size of an image.
  Press the  key...

43
 Keystone
 Use this function to make an image look visually correct when it is 
projected onto the screen.
SelectEnterExit
Auto Keystone
Keystone
V. Keystone
H. Keystone
Four Corners On
Reset
    Auto Keystone:  Automatically adjust the shape of the 
projected image according to the angle at which the projector is 
positioned.
    V.  Keystone: Press the  or  key to adjust image distortion 
vertically. If the image looks trapezoidal, this option can help 
make the image rectangular.
    H....

44
b. Use the  , , , or  key to adjust the setting.
Exit
   Reset: Resets the projected image adjustment to its original 
settings.
  Projection Mode
 Use this function to select the projector mode, depending upon 
how the projector is mounted.
Projection Mode
FrontFront Ceiling RearRear Ceiling
   Front: This is the default selection. The image is projected 
straight on the screen.
   Front Ceiling: When selected, the image will turn upside down.
   Rear: When selected, the image will appear...

45
 RGB Input Range
 Adjust the color range of the HDMI image data.
RGB Input Range
AutoStandard Full
   Auto: Automatically detect RGB range.
   Standard: Process the input image as standard range data.
   Full:  Select this mode when computer signal or full range signal 
from AV equipment is input.
English 
English
User Settings
English   

46
SETTING
 Language
  Choose the multilingual OSD. Press “Enter” to open the sub menu 
and then use the  or  or  or  key to select your preferred 
language. Press “Enter” to finalize the selection. 
 Monitor Out (Standby)
  Enable/Disable the Monitor output function.
Monitor Out (Standby)
OnOff
   On: Enable the Monitor Out function at projector standby status.
   Off: Disable the Monitor Out function at projector standby 
status.
  Network (Standby)
  Enable/Disable the network function.
Network...

47
 Network
  Configure the network settings.
Network StateConnected
DHCPOn
IP Address
Subnet mask
Gateway
DNS
Apply
MAC
SelectEnterExit
LAN
   
Network State: Display the network connection status.
    DHCP:  Select “On” to allow the projector to obtain an IP 
address automatically from your network. Select “Off” to 
manually assign IP, Subnet Mask and Gateway configuration.
DHCP
OnOff
   IP Address: Set an IP address or display IP address provided 
from DHCP server when DHCP is set to “On”.
IP...

48
 Security
  Configure the security settings.
SecurityOff
Change Password
SelectEnterExit
Security
    Security:  Select “On” to use the security verification when the 
turning on the projector. Select “Off” to be able to switch on the 
projector without a password verification.
Security
OnOff
   Change Password: Set the password.
Security
Enter Security Code (6 Digits)
Exit
 Trigger Output (12V)
  Use this function to enable or disable the trigger.
+12VGND
   
Off: Choose “Off” to disable the...