Ricoh Projector PJ X5580 User Manual

49
 Reset
  Return the adjustments and settings to the factory default values.
Choose “Yes” to return the display parameters on all menus 
except Language and Lamp Hours Used to the factory default 
settings. LAN Control settings also return to the factory default. 
Set again after reset.
ResetYes
ExitNo
English 
English
User Settings
English   

50
VOLUME 
 Mute
  Temporarily turn off the sound.
  Choose “On” to mute the sound.
  Choose “Off” to turn mute off.
 Volume
  Adjust the volume level.
  Press the  key to decrease the volume.
  Press the  key to increase the volume.
 MIC Volume
  Adjust the microphone volume level.
MIC Volume
  Press the  key to decrease the microphone volume.
  Press the  key to increase the microphone volume.
 Audio Input
  The default audio settings are on the back panel of the projector. 
Use this option to...

51
OPTIONS
 Auto Source
  When this function is turned “On”, the projector will search for 
other signals if the current input signal is lost. When this function is\
 
turned “Off”, it will only search a specified connection port.
 Input
Use this option to enable/disable input sources. Press the ► key 
to enter  the sub menu and select which sources you require. Press 
“Enter” to finalize the selection. The projector will only search for 
inputs that are enabled.
Enter
Exit
Select
Source
Computer1...

52
 Lamp Settings
  Use this option to view the lamp life status and configure the lamp 
settings. Press the ► key to enter the sub menu and configure the 
desired settings.
SelectEnterExit
Lamp Hours Used (Normal)
Lamp Settings
Lamp Life Reminder
Lamp Power Mode
Image EcoOff
Normal Off
   Lamp Hours Used (Normal): Display the projection time.
Lamp Hours Used in Eco mode or “Image Eco” mode “On” will 
be converted to Lamp Hours Used in “Normal” mode.
   Lamp Life Reminder: Choose this function to show...

53
 Dust Filter Reminder
 Use this option to view the filter status and configure the filter settings. Press the ► key to enter the sub menu and configure the desired settings.
This item is disabled for the projector sold in some regions.
EnterExit
Select
Dust Filter Reminder
Filter Reminder (Hour)
Cleaning Up Reminder
   Filters Remind (Hour): Set the maximum filter time usage.
   
Cleaning Up Reminder: Choose this function to show or hide the warning message when the changing filter message is...

54
   Screen Capture: Press “Enter” to capture an image of the picture 
currently displayed on screen.
Screen capture in progress
Please wait
 Information
  Display the projector information.
Exit
Information
Source
Resolution
Software Version
Color Space
Aspect Ratio
Computer1
No Data
Auto
   
Source: Display the input source that is currently connected to.
   Resolution: Display the resolution setting of the current input 
source.
   Software Version: Display the firmware version.
   Color Space:...

55
3D
 3D Sync
  Use this option to disable the 3D function or select the appropriate 
the 3D function. 
 Off: Choose “Off” to display normal (2D) picture.
  DLP: Choose “DLP” to use optimized settings for DLP Link 3D 
Glasses.
  IR: Select “IR” to use optimized setting for IR 3D Glasses.
 3D Sync Invert
  Use this option to enable/disable the 3D sync invert function.
 Off: Choose “Off” for default frame contents.
  On: Choose “On” to invert left and right frame contents.
 3D Format
  Use this...

56
Controlling this Device with Web 
Browser
You can control this device from a PC by using a web browser.
Connecting to the device
1. Confirmation of the IP address of the device
Select the “Setting” → “Network” in the menu of this device, 
and verify the IP address.
Network StateConnected
DHCPOn
IP Address
Subnet mask
Gateway
DNS
Apply
MAC
SelectEnterExit
LAN
2. Connection
Enter the IP address that was verified by opening the web 
browser.
For example, enter http://192.168.0.100/ if the IP address is...

57
Log in
1. When you open the web page, you will see a screen like the one 
below.
If you are controlling by web browser, select "Admin". 
When controlling by Crestron, choose "Crestron".
2. Enter the password in the "Password" field.
When a password is enabled, you must enter the password. The 
initial password is "admin". When a password is disabled, the 
character of the Password will be dimmed.
Login by clicking the [Login] button.
	You can use only alphanumeric...

58
When you log in, a navigation bar for setting the projector will be 
displayed on the left side of the home screen.
System Status
The current status of the projector is displayed.
You can check information such as firmware version number of 
the projector and IP address.
 ►Language selection 
You can change the language of the Web Control screen to 
English, Japanese and Chinese (Simplified). Select from the 
pull-down list and press “Apply”.  
	The version name displayed on the web page in the...