Ricoh Projector PJ X5580 User Manual

							39
PICTURE
 Picture Mode
  There are many factory presets optimized for various types of 
images. The available options: 
  Bright: Mode for emphasizing brightness.
   Standard: Mode for optimizing the balance between brightness 
and color reproduction.
  Natural: Mode for emphasizing color reproduction.
   Presentation: This mode is suitable for showing PowerPoint 
presentations when the project is connected to the PC.
   User: User defined settings.
  Wall Color
  Use this function to obtain an optimized screen image according to 
the wall color. The available options: White/ Light Yellow/ Light 
Blue/ Pink / Dark Green.
Wall Color White
Light Yellow Light Blue
PinkDark Green
 Brightness
 Adjust the brightness of the image.
Brightness
  Press the  key to darken image.
  Press the  key to lighten the image.
Picture ModePictureStandardWall ColorWhiteBrightnessContrastSharpnessSaturationTint
SelectEnterExit
English 
English
User Settings
English   
						

							40
 Contrast
  The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
Contrast
  Press  the  key to decrease the contrast.
  Press the  key to increase the contrast.
 Sharpness
 Adjust the sharpness of the image.
Sharpness
  Press the  key to decrease the sharpness.
  Press the  key to increase the sharpness.
 Saturation
  Adjust the color saturation of the image.
Saturation
  Press the  key to decrease the amount of color in the image.
  Press the  key to increase the amount of color in the image. 
 Tint
  Adjust the color balance of the image.
Tint
  Press the  key to adjust the image color greenish.
  Press the  key to adjust the image color reddish. 
	“Sharpness”, “Saturation” and “Tint” functions are only supported under Video/S-Video/Composite Signal sources.
Note 
English
User Settings   
						

							41
SCREEN
 Aspect Ratio
 Use this function to choose your desired aspect ratio.
   Auto: Automatically selects the appropriate display format. 
When input is 4:3, the image is displayed as 4:3. When input is 
16:9 above, the image is displayed as 16:9.
   4:3: Displays 4:3 aspect ratio.
   16:9: Displays 16:9 aspect ratio.
 Phase
   Eliminate flicker from the image displayed. Use the  or  key to 
adjust the value. 
Phase
 Clock
   Adjust the number of total dots in one horizontal period. Use the  
or  key to adjust number to match your PC image. 
Clock
Aspect RatioScreen
PhaseClock
V. PositionDigital ZoomKeystoneProjection ModeRGB Input Range
SelectEnterExit
Auto
Rear CeilingAuto
H. Position
English 
English
User Settings
English   
						

							42
 H. Position (Horizontal Position)
 Shift the projected image position horizontally.
H. Position
  Press the  key to move the image left.
  Press the  key to move the image right.
 V. Position (Vertical Position)
 Shift the projected image position vertically.
V. Position
  Press the  key to move the image down.
  Press the  key to move the image up.
 Digital Zoom
 Adjust the digital zoom ratio of the projected image.
Digital Zoom
  Press the  key to reduce the size of an image.
  Press the  key to magnify an image on the projection screen.
	“H. Position” and  “V. Position” functions are only supported under Computer Signal source.
Note 
English
User Settings   
						

							43
 Keystone
 Use this function to make an image look visually correct when it is 
projected onto the screen.
SelectEnterExit
Auto Keystone
Keystone
V. Keystone
H. Keystone
Four Corners On
Reset
    Auto Keystone:  Automatically adjust the shape of the 
projected image according to the angle at which the projector is 
positioned.
    V.  Keystone: Press the  or  key to adjust image distortion 
vertically. If the image looks trapezoidal, this option can help 
make the image rectangular.
    H.  Keystone: Press the  or  key to adjust image distortion 
horizontally.
   Four Corners: Adjust any distortion in the four corners of the 
projected image. 
To adjust the desired corner, perform the following: 
a. Use the  or  key to select the item to select which corner 
to adjust and press the “Enter” key to enter its submenu.
Select
Enter Exit
Four Corners
	“V. Keystone” function will be disabled when the “Auto Keystone” is set to “On”.
Note
English 
English
User Settings
English   
						

							44
b. Use the  , , , or  key to adjust the setting.
Exit
   Reset: Resets the projected image adjustment to its original 
settings.
  Projection Mode
 Use this function to select the projector mode, depending upon 
how the projector is mounted.
Projection Mode
FrontFront Ceiling RearRear Ceiling
   Front: This is the default selection. The image is projected 
straight on the screen.
   Front Ceiling: When selected, the image will turn upside down.
   Rear: When selected, the image will appear reversed.
   Rear Ceiling: When selected, the image will appear reversed in 
upside down position. 
English
User Settings   
						

							45
 RGB Input Range
 Adjust the color range of the HDMI image data.
RGB Input Range
AutoStandard Full
   Auto: Automatically detect RGB range.
   Standard: Process the input image as standard range data.
   Full:  Select this mode when computer signal or full range signal 
from AV equipment is input.
English 
English
User Settings
English   
						

							46
SETTING
 Language
  Choose the multilingual OSD. Press “Enter” to open the sub menu 
and then use the  or  or  or  key to select your preferred 
language. Press “Enter” to finalize the selection. 
 Monitor Out (Standby)
  Enable/Disable the Monitor output function.
Monitor Out (Standby)
OnOff
   On: Enable the Monitor Out function at projector standby status.
   Off: Disable the Monitor Out function at projector standby 
status.
  Network (Standby)
  Enable/Disable the network function.
Network (Standby)
OnOff
   On: Enable the network function at  projector standby status. 
   Off: Disable the network function at projector standby status. 
LanguageSetting
Monitor Out (Standby)Network (Standby)
Security12V TriggerReset
SelectEnterExit
English
Network
OffOff
Off 
English
User Settings   
						

							47
 Network
  Configure the network settings.
Network StateConnected
DHCPOn
IP Address
Subnet mask
Gateway
DNS
Apply
MAC
SelectEnterExit
LAN
   
Network State: Display the network connection status.
    DHCP:  Select “On” to allow the projector to obtain an IP 
address automatically from your network. Select “Off” to 
manually assign IP, Subnet Mask and Gateway configuration.
DHCP
OnOff
   IP Address: Set an IP address or display IP address provided 
from DHCP server when DHCP is set to “On”.
IP Address IP Address
   Subnet mask: Set subnet mask number or display subnet mask 
number provided from DHCP server when DHCP is set to 
“On”.
   Gateway: Set the default gateway of the network connected 
to the projector or display the default gateway of the network 
provided from DHCP server when DHCP is  is set to “On”.
   DNS: Display the IP address of the domain name system (DNS) 
server.
    Apply:  Select “Yes” to apply the changes made in network 
configuration settings.
Apply
YesNo
   MAC: Display MAC address.
	Consult network administrator for network settings.
Note
English 
English
User Settings
English   
						

							48
 Security
  Configure the security settings.
SecurityOff
Change Password
SelectEnterExit
Security
    Security:  Select “On” to use the security verification when the 
turning on the projector. Select “Off” to be able to switch on the 
projector without a password verification.
Security
OnOff
   Change Password: Set the password.
Security
Enter Security Code (6 Digits)
Exit
 Trigger Output (12V)
  Use this function to enable or disable the trigger.
+12VGND
   
Off: Choose “Off” to disable the trigger. When the function is 
disabled, the power will output 0V. 
   On: Choose “On” to enable the trigger. When the function is 
enabled, the power will output 12V. 
English
User Settings