Ricoh Projector PJ X3351N User Manual
Here you can view all the pages of manual Ricoh Projector PJ X3351N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
ItemDefaultPower Timer > Timer ProjectionSpecify whether or not to enable the power timer function.
When you enable this function, the projector automatically starts projection and turns off at the specified time. If you select [On], specify
[Projection Day] and [Projection Time] to enable this function.OffPower Timer > Projection Day
Select a day of the week to start projecting using the power time function.(Not programmed)Power Timer > Projection TimeSpecify the time to start and end projecting using...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-110.png "Page 111
ItemDefaultPower Timer > Timer ProjectionSpecify whether or not to enable the power timer function.
When you enable this function, the projector automatically starts projection and turns off at the specified time. If you select [On], specify
[Projection Day] and [Projection Time] to enable this function.OffPower Timer > Projection Day
Select a day of the week to start projecting using the power time function.(Not programmed)Power Timer > Projection TimeSpecify the time to start and end projecting using...")
ItemDefaultPower Timer > Timer ProjectionSpecify whether or not to enable the power timer function. When you enable this function, the projector automatically starts projection and turns off at the specified time. If you select [On], specify [Projection Day] and [Projection Time] to enable this function.OffPower Timer > Projection Day Select a day of the week to start projecting using the power time function.(Not programmed)Power Timer > Projection TimeSpecify the time to start and end projecting using...
Page 112
![Page 112
USB Settings Menu
This section explains the items in USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
• [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-111.png "Page 112
USB Settings Menu
This section explains the items in USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
• [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image...")
USB Settings Menu This section explains the items in USB Settings menu under the Network/USB Settings menu tab. You can also specify and check the items in the USB Settings menu using Web Image Monitor. However, the following items are available only on the menu screen. • [Remove USB Mem.] in [Settings] • [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status] On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page. For details about Web Image...
Page 113
CommonItemDefaultAuto Start SlideshowSpecify whether or not to start a slide show automatically when the projector is connected to the USB device.OffRemove USB Mem. The USB device can be removed when this command is executed.- Display Status USB Memory ItemDefaultUSB Memory Free Space (KB)Display the space available on the USB device (Displayed in KB).-USB Memory Access Status Display whether or not the USB device can be accessed.- Firmware Version ItemDefaultNetwork/USB Func. Firmware VersionDisplay the...
Page 114
![Page 114
Network Settings Menu
This section explains the items in Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup], [EAP Type], [Import Client Certificate], [Client Certificate User Name], [Client Certificate List], [Import CA Certificate], [CA Certificate List], [Delete Client/CA
Certificate], [MS-CHAP v2...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-113.png "Page 114
Network Settings Menu
This section explains the items in Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup], [EAP Type], [Import Client Certificate], [Client Certificate User Name], [Client Certificate List], [Import CA Certificate], [CA Certificate List], [Delete Client/CA
Certificate], [MS-CHAP v2...")
Network Settings Menu This section explains the items in Network Settings menu under the Network/USB Settings menu tab. You can also specify and check the items in the Network Settings menu using Web Image Monitor. However, the following items are available only on the menu screen. • [Simple Wireless LAN Setup], [EAP Type], [Import Client Certificate], [Client Certificate User Name], [Client Certificate List], [Import CA Certificate], [CA Certificate List], [Delete Client/CA Certificate], [MS-CHAP v2...
Page 115
![Page 115
TCP/IP SettingsItemDefaultDHCPSpecify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. When [Disable] is selected, enter the IP address,
subnet mask, and default gateway manually.EnableIP Address
Enter the projector's IP address.0.0.0.0Subnet MaskEnter the subnet mask.0.0.0.0Default Gateway Enter the default gateway.0.0.0.0
Wireless LAN (RICOH PJ X3351N/WX3351N/WX4241N only)
Simple Settings
ItemDefaultSimple Wireless LAN...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-114.png "Page 115
TCP/IP SettingsItemDefaultDHCPSpecify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. When [Disable] is selected, enter the IP address,
subnet mask, and default gateway manually.EnableIP Address
Enter the projector's IP address.0.0.0.0Subnet MaskEnter the subnet mask.0.0.0.0Default Gateway Enter the default gateway.0.0.0.0
Wireless LAN (RICOH PJ X3351N/WX3351N/WX4241N only)
Simple Settings
ItemDefaultSimple Wireless LAN...")
TCP/IP SettingsItemDefaultDHCPSpecify whether to enable or disable DHCP. The IP address is allocated automatically from the DHCP server when [Enable] is selected. When [Disable] is selected, enter the IP address, subnet mask, and default gateway manually.EnableIP Address Enter the projector's IP address.0.0.0.0Subnet MaskEnter the subnet mask.0.0.0.0Default Gateway Enter the default gateway.0.0.0.0 Wireless LAN (RICOH PJ X3351N/WX3351N/WX4241N only) Simple Settings ItemDefaultSimple Wireless LAN...
Page 116
![Page 116
ItemDefaultCommunication ModeSelect the wireless LAN communication mode.• Infrastructure Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
• Adhoc Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode.AdhocSSID
Enter the SSID to connect to a wireless LAN...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-115.png "Page 116
ItemDefaultCommunication ModeSelect the wireless LAN communication mode.• Infrastructure Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
• Adhoc Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode.AdhocSSID
Enter the SSID to connect to a wireless LAN...")
ItemDefaultCommunication ModeSelect the wireless LAN communication mode.• Infrastructure Select this mode when you want to connect the projector to a wireless LAN network. You need to specify [SSID] and items in [Security] and [TCP/IP Settings] in this mode. • Adhoc Select this mode when you want to connect the projector and the computer directly. The projector specifies [SSID] and items in [Security] and [TCP/IP Settings] automatically in this mode.AdhocSSID Enter the SSID to connect to a wireless LAN...
Page 117
![Page 117
ItemDefaultDefault GatewayEnter the default gateway.0.0.0.0
Security
ItemDefaultAuthentication MethodSelect the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA/WPA2-PSK
• WPA2-PSK
• WPA/WPA2-EAP
• WPA2-EAPOpen SystemEncryption Method
Select the wireless LAN encryption method.• No Encryption Communication is not encrypted. You can select [No Encryption]
if you select [Open System] in [Authentication Method].
• WEP You can select [WEP] if you select [Open System] in
[Authentication...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-116.png "Page 117
ItemDefaultDefault GatewayEnter the default gateway.0.0.0.0
Security
ItemDefaultAuthentication MethodSelect the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA/WPA2-PSK
• WPA2-PSK
• WPA/WPA2-EAP
• WPA2-EAPOpen SystemEncryption Method
Select the wireless LAN encryption method.• No Encryption Communication is not encrypted. You can select [No Encryption]
if you select [Open System] in [Authentication Method].
• WEP You can select [WEP] if you select [Open System] in
[Authentication...")
ItemDefaultDefault GatewayEnter the default gateway.0.0.0.0 Security ItemDefaultAuthentication MethodSelect the wireless LAN authentication method.• Open System • WEP Shared Key • WPA/WPA2-PSK • WPA2-PSK • WPA/WPA2-EAP • WPA2-EAPOpen SystemEncryption Method Select the wireless LAN encryption method.• No Encryption Communication is not encrypted. You can select [No Encryption] if you select [Open System] in [Authentication Method]. • WEP You can select [WEP] if you select [Open System] in [Authentication...
Page 118
![Page 118
ItemDefaultTransmission WEP Key NumberSelect the Key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [Open System] or [WEP Shared
Key] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-117.png "Page 118
ItemDefaultTransmission WEP Key NumberSelect the Key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [Open System] or [WEP Shared
Key] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13...")
ItemDefaultTransmission WEP Key NumberSelect the Key number used to authenticate and encrypt transmissions when you select [WEP] in [Encryption Method]. • 1 • 2 • 3 • 41Network Key Enter the WEP key when you select [Open System] or [WEP Shared Key] in [Authentication Method] and select [WEP] in [Encryption Method]. When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5 characters for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13...
Page 119
![Page 119
ItemDefaultClient Certificate User NameEnter the client certificate user name used for WPA/WPA2-EAP orWPA2-EAP when [EAP-TLS] is selected in [EAP Type].
This setting is optional. If it is blank, the default value of the certificate
will be used to decrypt the certificate.(blank)Client Certificate List
Displays a list of imported client certificates.-Import CA CertificateImports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is
selected in [Authentication Method].-CA Certificate List
Displays a list...](http://img.usermanuals.tech/thumb/64/100047/w300_projector_manual_8920_d-118.png "Page 119
ItemDefaultClient Certificate User NameEnter the client certificate user name used for WPA/WPA2-EAP orWPA2-EAP when [EAP-TLS] is selected in [EAP Type].
This setting is optional. If it is blank, the default value of the certificate
will be used to decrypt the certificate.(blank)Client Certificate List
Displays a list of imported client certificates.-Import CA CertificateImports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is
selected in [Authentication Method].-CA Certificate List
Displays a list...")
ItemDefaultClient Certificate User NameEnter the client certificate user name used for WPA/WPA2-EAP orWPA2-EAP when [EAP-TLS] is selected in [EAP Type]. This setting is optional. If it is blank, the default value of the certificate will be used to decrypt the certificate.(blank)Client Certificate List Displays a list of imported client certificates.-Import CA CertificateImports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is selected in [Authentication Method].-CA Certificate List Displays a list...
Page 120
Reset Wireless LAN SettingsItemDefaultReset Wireless LAN SettingsThe following wireless LAN settings are reset to their defaults: Communication Mode, SSID, Channel, Authentication Method, Encryption Method, Transmission WEP Key Number, Network Key, DHCP, IP Address, Subnet Mask, Default Gateway.- LAN Common Specify the wired LAN and wireless LAN settings. Preferred Default Gateway (RICOH PJ X3351N/WX3351N/WX4241N) ItemDefaultPreferred Default Gateway Select the network interface for the projector that is...