Ricoh Projector PJ X3351N User Manual

Changing the Settings1. Press the [Menu] button.
2.Select the menu tab using the [] and [] buttons.
If you select the Display Status tab, you can confirm the information in this step.
3. Press the [
] button.
4. Select the item to be changed using the [
] and [] buttons.
5. Press the [Enter] button.
If [To settings] is displayed on the right, the item has a submenu. Select an item on the submenu, and then press the [Enter] button.
If [Execute] is displayed to the right of the item you select, the...

• Inputting numbersUse the number buttons on the remote control to input numbers.
• Inputting text Use the keyboard that is displayed on screen to input text. You can also use the number
buttons on the remote control to input numbers.
7. If a confirmation screen appears, select [OK], and then press the [Enter] button.
8. Press the [Menu] button.
9. If a confirmation screen appears, select [Reflect], and then press the [Enter] button.
• The control panel on the projector can be used for operations, but...

• Settings in the Network/USB Settings menu are not applied until you select [Reflect] on theconfirmation screen.
• To access the menu screen while projecting images from a USB memory device or server, press the [Menu] button to stop projecting images, and then press the [Menu] button again.Changing the Settings
91  

Restoring All the Settings to Their Defaults1. Press the [Menu] button.
2.Select [Default Settings 2], and then press the [] button.
3. Select [Reset All], and then press the [Enter] button.
4.Select [OK] in the confirmation screen, and then press the [Enter] button.
• The start menu is displayed after [Reset All] is executed. For details about the start menu, see
page 38 "When the start menu is displayed".
• The user logo, some of the passwords, and the network security settings cannot be reset...

Image Adjustment MenuItemDefaultPicture ModeSelect the picture mode.
This function is not available when you select [On] in [3D Projection]
under [Display Settings] or [On] in [Interactive Mode] under [Default
Settings 1].
• Bright This image mode makes it easier to see the projection in bright
locations.
• Standard This is the standard image mode.
• Photo Photos appear more natural in this mode.
• Video Video is smoother in this mode.
• DICOM Sim. Mode In this image mode, the images are adjusted to...

ItemDefaultR-levelAdjust the level of red in the image. The greater the value, the stronger the
color red is in the image.0G-level
Adjust the level of green in the image. The greater the value, the strongerthe color green is in the image.0B-level
Adjust the level of blue in the image. The greater the value, the strongerthe color blue is in the image.0Color Saturation
Adjust the color saturation of the image. The greater the value, the richerthe image.
This function is available when you select [Y/Pb/Pr]...

ItemDefaultRGB Input RangeSelect the RGB input range.
This function is available when you select [HDMI] (RGB signals) as the
input signal.
• Auto The projector switches RGB input range according to the settings of
the connected equipment.
• Standard Select this mode when the color black in the image is light.
• Full Select this mode when dark parts in the image are too dark.AutoAuto Set Signals
Automatically adjust the items in [Detailed Signal Settings].
This function is available when you select...

ItemDefaultDetailed Signal Settings > Clamp Pulse 1Adjust the clamp pulse position.
This function is available when you select [Computer 1] or [Computer 2]
as the input signal.0 to 255 *1Detailed Signal Settings > Clamp Pulse 2
Adjust the clamp pulse width.
This function is available when you select [Computer 1] or [Computer 2]
as the input signal.0 to 255 *1
*1
The default of [Phase], [Clamp Pulse 1], and [Clamp Pulse 2] is variable because the projector automatically
adjusts these settings according to...

Display Settings MenuItemDefaultAuto Keystone (Vertical)Specify whether or not to implement vertical keystone correction
automatically depending on the angle of the projector's position.
When [Auto Keystone (Vertical)] is enabled, [4-corner Correction] is
disabled automatically and reset to its default.OnKeystone (Vertical)
Adjust for vertical keystone distortion manually.
To decrease the length of the bottom of the projected image, decrease
the value. To decrease the length of the top of the...

ItemDefault4-corner CorrectionMove the four corners of the projected image, so that it fits into the
screen.
Select the corner you want to move and increase or decrease the value until it fits into the screen.
When [4-corner Correction] is enabled, [Auto Keystone (Vertical)],
[Keystone (Vertical)], [Keystone (Horizontal)] are disabled automatically
and reset to their defaults.
When [4-corner Correction] is enabled, the [Zoom], [Aspect], and [Display Position] settings are not available.
If the projector...