Ricoh Projector PJ WX6181N User Manual
Here you can view all the pages of manual Ricoh Projector PJ WX6181N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
96
[SIGNAL TYPE]
Selection of RGB and component signals. Normally, this is set to [AUTO].\
Please change the setting if the color of the image
remains unnatural.AUTO ................................ Automatically distinguishes RGB and component signals.
RGB .................................... Switches to the RGB input.
COMPONENT .............. Switches to the component signal input.
[VIDEO LEVEL]
Selection of the video signal level when connecting an external device t\
o the HDMI 1 IN terminal, HDMI 2...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-110.png "Page 111
96
[SIGNAL TYPE]
Selection of RGB and component signals. Normally, this is set to [AUTO].\
Please change the setting if the color of the image
remains unnatural.AUTO ................................ Automatically distinguishes RGB and component signals.
RGB .................................... Switches to the RGB input.
COMPONENT .............. Switches to the component signal input.
[VIDEO LEVEL]
Selection of the video signal level when connecting an external device t\
o the HDMI 1 IN terminal, HDMI 2...")
96 [SIGNAL TYPE] Selection of RGB and component signals. Normally, this is set to [AUTO].\ Please change the setting if the color of the image remains unnatural.AUTO ................................ Automatically distinguishes RGB and component signals. RGB .................................... Switches to the RGB input. COMPONENT .............. Switches to the component signal input. [VIDEO LEVEL] Selection of the video signal level when connecting an external device t\ o the HDMI 1 IN terminal, HDMI 2...
Page 112
![Page 112
97
[3D SETTINGS]
Please refer to “3-8 Projecting 3D videos” (→ page 39) for the operation.
STEREO VIEWER
Stack up a single or multiple projectors and carry out the settings for projecting 3D videos. Select the left / right settings of the
3D eyewear using the stereo viewer.SINGLE Use a single projector to project 3D videos.
DUAL LEFT Use a dedicated projector for displaying videos on the left.
DUAL RIGHT Use a dedicated projector for displaying videos on the right.
STEREO FILTER
Stack up a single or...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-111.png "Page 112
97
[3D SETTINGS]
Please refer to “3-8 Projecting 3D videos” (→ page 39) for the operation.
STEREO VIEWER
Stack up a single or multiple projectors and carry out the settings for projecting 3D videos. Select the left / right settings of the
3D eyewear using the stereo viewer.SINGLE Use a single projector to project 3D videos.
DUAL LEFT Use a dedicated projector for displaying videos on the left.
DUAL RIGHT Use a dedicated projector for displaying videos on the right.
STEREO FILTER
Stack up a single or...")
97 [3D SETTINGS] Please refer to “3-8 Projecting 3D videos” (→ page 39) for the operation. STEREO VIEWER Stack up a single or multiple projectors and carry out the settings for projecting 3D videos. Select the left / right settings of the 3D eyewear using the stereo viewer.SINGLE Use a single projector to project 3D videos. DUAL LEFT Use a dedicated projector for displaying videos on the left. DUAL RIGHT Use a dedicated projector for displaying videos on the right. STEREO FILTER Stack up a single or...
Page 113
![Page 113
98
❻ Menu Descriptions & Functions [DISPLAY]
[PIP/PICTURE BY PICTURE]
SUB INPUT
Select the input signal to be displayed in the sub-display.
Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 65) for details on the operation.
MODE
Select either PIP or PICTURE BY PICTURE when switching to 2-screen display.
PICTURE SWAP
The videos in the main display and sub-display will be switched.
Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 67) for details.
PIP SETTING...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-112.png "Page 113
98
❻ Menu Descriptions & Functions [DISPLAY]
[PIP/PICTURE BY PICTURE]
SUB INPUT
Select the input signal to be displayed in the sub-display.
Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 65) for details on the operation.
MODE
Select either PIP or PICTURE BY PICTURE when switching to 2-screen display.
PICTURE SWAP
The videos in the main display and sub-display will be switched.
Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 67) for details.
PIP SETTING...")
98 ❻ Menu Descriptions & Functions [DISPLAY] [PIP/PICTURE BY PICTURE] SUB INPUT Select the input signal to be displayed in the sub-display. Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 65) for details on the operation. MODE Select either PIP or PICTURE BY PICTURE when switching to 2-screen display. PICTURE SWAP The videos in the main display and sub-display will be switched. Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 67) for details. PIP SETTING...
Page 114
99 TIP: The horizontal position and vertical position are the amount of movement from the reference points. For example, when TOP-LEFT is adjusted, the position is displayed with the same amount of movement even if displayed with other starting positions. The maximum amount of movement is half the resolution of the projector. Reference point Adjust using the horizontal position Sub-display Main display Reference point Adjust using the vertical position TOP-LEFT TOP-RIGHT BOTTOM-LEFT BOTTOM-RIGHT...
Page 115
![Page 115
100
[GEOMETRIC CORRECTION]
KEYSTONE
Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen.
To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the on-screen menu. The
[GEOMETRIC CORRECTION] screen can also be displayed by pressing the Geometric. button on the remote control.HORIZONTAL ............... Adjustments when projecting from a diagonal direction to the
screen.
VERTICAL .......................Adjustments...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-114.png "Page 115
100
[GEOMETRIC CORRECTION]
KEYSTONE
Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen.
To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the on-screen menu. The
[GEOMETRIC CORRECTION] screen can also be displayed by pressing the Geometric. button on the remote control.HORIZONTAL ............... Adjustments when projecting from a diagonal direction to the
screen.
VERTICAL .......................Adjustments...")
100 [GEOMETRIC CORRECTION] KEYSTONE Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen. To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the on-screen menu. The [GEOMETRIC CORRECTION] screen can also be displayed by pressing the Geometric. button on the remote control.HORIZONTAL ............... Adjustments when projecting from a diagonal direction to the screen. VERTICAL .......................Adjustments...
Page 116
![Page 116
101
CORNERSTONE
Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen.
Please refer to “Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]” (→ page 33) for details on the operation.
HORIZONTAL CORNER/VERTICAL CORNER
Distortion correction for corner projection such as wall surfaces.HORIZONTAL CORNER
............................................. Performs correction for projection onto a wall lying at an angle to the horizontal direction.
*...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-115.png "Page 116
101
CORNERSTONE
Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen.
Please refer to “Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]” (→ page 33) for details on the operation.
HORIZONTAL CORNER/VERTICAL CORNER
Distortion correction for corner projection such as wall surfaces.HORIZONTAL CORNER
............................................. Performs correction for projection onto a wall lying at an angle to the horizontal direction.
*...")
101 CORNERSTONE Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen. Please refer to “Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]” (→ page 33) for details on the operation. HORIZONTAL CORNER/VERTICAL CORNER Distortion correction for corner projection such as wall surfaces.HORIZONTAL CORNER ............................................. Performs correction for projection onto a wall lying at an angle to the horizontal direction. *...
Page 117
![Page 117
102
Adjustment method
1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORRECTION] menu and
then press the ENTER button.
• The adjustment screen will be displayed.
2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER
button.
• The cursor will change into an adjustment point (yellow in color).
3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button.
•...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-116.png "Page 117
102
Adjustment method
1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORRECTION] menu and
then press the ENTER button.
• The adjustment screen will be displayed.
2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER
button.
• The cursor will change into an adjustment point (yellow in color).
3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button.
•...")
102 Adjustment method 1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORRECTION] menu and then press the ENTER button. • The adjustment screen will be displayed. 2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER button. • The cursor will change into an adjustment point (yellow in color). 3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button. •...
Page 118
103 PINCUSHION Adjust the curve distortion of the projection screen.TOP .................................... Adjust the curve distortion of the upper edge of the projection screen. BOTTOM......................... Adjust the curve distortion of the lower edge of the projection screen. LEFT ................................... Adjust the curve distortion of the left edge of the projection screen. RIGHT ............................... Adjust the curve distortion of the right edge of the projection...
Page 119
![Page 119
104
[EDGE BLENDING]
This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combination of several
projectors in the up, down, left and right positions.
MODE
This enables or disables the EDGE BLENDING function.
When MODE is set to ON, the TOP, BOTTOM, LEFT, RIGHT and BLACK LEVEL settings can be adjusted.
TOP/BOTTOM/LEFT/RIGHT
This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen.
The following settings can be...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-118.png "Page 119
104
[EDGE BLENDING]
This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combination of several
projectors in the up, down, left and right positions.
MODE
This enables or disables the EDGE BLENDING function.
When MODE is set to ON, the TOP, BOTTOM, LEFT, RIGHT and BLACK LEVEL settings can be adjusted.
TOP/BOTTOM/LEFT/RIGHT
This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen.
The following settings can be...")
104 [EDGE BLENDING] This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combination of several projectors in the up, down, left and right positions. MODE This enables or disables the EDGE BLENDING function. When MODE is set to ON, the TOP, BOTTOM, LEFT, RIGHT and BLACK LEVEL settings can be adjusted. TOP/BOTTOM/LEFT/RIGHT This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen. The following settings can be...
Page 120
![Page 120
105
[MULTI SCREEN]
WHITE BALANCE
This adjusts the white balance for each projector when projecting using a combination of several projectors.
This can be adjusted when [MODE] is set to [ON].BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B
............................................. Adjusting the black color of the video.
CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B
............................................. Adjusting the white color of the video.
PICTURE SETTING
This sets the division...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-119.png "Page 120
105
[MULTI SCREEN]
WHITE BALANCE
This adjusts the white balance for each projector when projecting using a combination of several projectors.
This can be adjusted when [MODE] is set to [ON].BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B
............................................. Adjusting the black color of the video.
CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B
............................................. Adjusting the white color of the video.
PICTURE SETTING
This sets the division...")
105 [MULTI SCREEN] WHITE BALANCE This adjusts the white balance for each projector when projecting using a combination of several projectors. This can be adjusted when [MODE] is set to [ON].BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B ............................................. Adjusting the black color of the video. CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B ............................................. Adjusting the white color of the video. PICTURE SETTING This sets the division...