Ricoh Projector PJ WX6181N User Manual

126
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.LAST .................................. Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO ................................ Searches for an active source in order of HDMI1 → HDMI2 → DisplayPort → BNC → BNC(CV) → BNC(Y/C) 
→ COMPUTER and displays the first found source.
HDMI1...

127
[POWER OPTIONS]
Selecting Power-saving in [STANDBY MODE]
Setting the power consumption in the standby mode.NORMAL ........................ In the standby mode, the power consumption of the projector is 0.11 W (100-130 V)/0.16 W (200-240 V).
In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off.
• When set to [NORMAL], the following terminals and functions will be disabled. HDMI output terminal,\
 
Audio output terminal, Ethernet port , USB-A port, LAN...

128
Turning On the Projector by Detecting Input Signal [AUTO POWER ON SELECT]
Under the condition of [NETWORK STANDBY], the projector automatically detects and projects synchronizing signal input from the 
selected terminals among Computer, HDMI1/2, DisplayPort by this function.OFF .................................... AUTO POWER ON SELECT function becomes inactive.
HDMI1, HDMI2, DisplayPort, COMPUTER
 ............................................. When the projector detects the computer signal input from...

129
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels. 
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORI-
ZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the...

130
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER 
button.
The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not\
 need to clear the 
filter usage hour.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
5. Using On-Screen Menu  

131
❽ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has nine pages. The information included is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
 The sub-menu tab in the [INFO.] display will become [USAGE TIME]/[SOURCE\
(1)]/[SOURCE(2)]/[WIRED LAN]/[VERSION(1)]/[VER-
SION(2)]/[OTHERS]/[CONDITIONS].
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON...

132
[SOURCE(1)]
INPUT TERMINAL RESOLUTION 
HORIZONTAL FREQUENCY  VERTICAL  FREQUENCY 
SYNC TYPE  SYNC  POLARITY 
SCAN TYPE  SOURCE  NAME 
ENTRY NO.
[SOURCE(2)]
SIGNAL TYPE  VIDEO  TYPE 
BIT  DEPTH  VIDEO LEVEL 
LINK  RATE  LINK LANE 
3D FORMAT
[SOURCE(3)]
INPUT TERMINAL  RESOLUTION 
HORIZONTAL  FREQUENCY  SYNC TYPE 
SOURCE NAME  ENTRY NO.
5. Using On-Screen Menu  

133
[SOURCE(4)]
SIGNAL TYPE VIDEO  TYPE 
BIT  DEPTH  VIDEO LEVEL 
LINK  RATE  LINK LANE 
3D FORMAT
[WIRED LAN]
IP ADDRESS  SUBNET  MASK 
GATEWAY  MAC ADDRESS
[VERSION(1)]
FIRMWARE DATA 
SUB-CPU
[VERSION(2)] 
FIRMWARE
5. Using On-Screen Menu  

134
[OTHERS]
DATE  TIME PROJECTOR NAME 
MODEL  NO.  SERIAL NUMBER 
CONTROL ID (when [CONTROL ID] is set)
[CONDITIONS]
INTAKE TEMPERATURE  EXHAUST  TEMPERATURE 
INSTALLATION POSITION  X-AXIS 
Y-AXIS Z-AXIS
About the X-AXIS, Y-AXIS and Z-AXIS CONDITIONS
*  Arrow direction of the Z-AXIS in the figure represents the top of the projector.
X-AXIS ............................. Display	the	projector	 image	at	an	 angle	 of	−100	 –	+100	
degrees to the horizontal in the X-axis direction.
X-AXIS value of  
the...

135
Z-AXIS ..............................Display	the	projector	 image	at	an	 angle	 of	−100	 –	+100	
degrees to the vertical in the Z-axis direction. Z-AXIS value of  
the projector
Horizontal plane  Z-axis
Gravity direction
5. Using On-Screen Menu