Ricoh Projector PJ WX6181N User Manual

76
❷ Menu Elements
Solid triangle
Menu mode
Ta b
Radio button
High Altitude symbol ECO mode symbol
Menu windows or dialog boxes typically have the following elements:
Highlight  Indicates the selected menu or item. 
Solid triangle  Indicates further choices are available. A highlighted triangle indicates the item is active. 
Tab  Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button  Use this round button to select an option in a dialog box.
Source...

77
* The asterisk (*) indicates that the default setting varies depending on the signal.
*1  The [GAMMA CORRECTION] item is available when an item other than [DICOM \
SIM.] is selected for [REFERENCE].
*2  The [SCREEN SIZE] item is available when [DICOM SIM.] is selected for [REFERENCE].
*3  When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], the [COLOR TEMPERATURE] is not available.
*4  The [INPUT RESOLUTION] item can be selected for COMPUTER input and BNC (analog RGB) input.
• Basic menu...

78
Menu ItemDefaultOptions
ADJUST 3D SETTINGS STEREO VIEWER
SINGLESINGLE, DUAL LEFT, DUAL RIGHT
STEREO FILTER SINGLESINGLE, DUAL LEFT, DUAL RIGHT
FORMAT AUTOAUTO, OFF(2D), FRAME PACKING, SIDE BY SIDE(HALF), SIDE 
BY SIDE(FULL), TOP AND BOTTOM, FRAME ALTERNATIVE, LINE 
ALTERNATIVE
L/R INVERT OFFOFF, ON
DISPLAY PIP/PICTURE 
BY PICTURE
SUB INPUT
OFF, HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), 
COMPUTER, ETHERNET
MODE PIP, PICTURE BY PICTURE
PICTURE SWAP OFFOFF, ON
PIP SETTING START POSITION...

79
Menu ItemDefaultOptions
SETUP MENU
LANGUAGE
ENGLISHENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 
日本語
DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, 
SUOMI
NORSK, TÜRKÇE, РУССКИЙ, 
, Ελληνικά, 中文, 한국어
ROMÂNĂ, HRVATSKA, БЪЛГ\fРСКИ, INDONESIA, हिन्दी , ไทย, 
, 繁體中文
COLOR SELECT COLORCOLOR, MONOCHROME
INPUT DISPLAY ONOFF, ON
MESSAGE DISPLAY ONOFF, ON
ID DISPLAY ONOFF, ON
ECO MESSAGE OFFOFF, ON
3D CAUTION MESSAGE ONOFF, ON
DISPLAY TIME AUTO 45 
SEC MANUAL, AUTO  5 SEC, AUTO 15 SEC, AUTO...

80
Menu ItemDefaultOptions
SETUP CONTROL TOOLSADMINISTRA-
TOR MODE
MENU MODE
ADVANCEDADVANCED, BASIC
NOT SAVE SETTING VALUES OFFOFF, ON
NEW PASSWORD
CONFIRM PASSWORD
PROGRAM 
TIMER ENABLE
OFFOFF, ON
SETTINGS EDITACTIVE
OFF, ON
D AY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY 
D AY
TIME
FUNCTION POWER, INPUT, ECO MODE
ADVANCED 
SETTINGS POWER OFF, ON
INPUT HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER
ECO MODE OFF, ON
REPEAT OFF, ON
DELETE
UP
DOWN
BACK
DATE AND TIME 
SETTINGS...

81
Menu ItemDefaultOptions
SETUP NETWORK 
SETTINGS
WIRED LAN
PROFILES
DISABLE, PROFILE 1, PROFILE 2
DHCP OFF, ON
IP ADDRESS 192.168.0.10
SUBNET MASK 255.255.255.0
GATEWAY 192.168.0.1
AUTO DNS OFF, ON
DNS CONFIGURATION
RECONNECT
PROJECTOR NAME PROJECTOR NAME WU6181N Series
DOMAIN HOST NAME
rdpj
DOMAIN NAME
ALERT MAIL ALERT MAIL
OFF, ON
HOST NAME
DOMAIN NAME
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS 1
RECIPIENT'S ADDRESS 2
RECIPIENT'S ADDRESS 3
TEST MAIL
NETWORK SERVICE HTTP...

82
Menu ItemDefaultOptions
INFO. USAGE TIME
LAMP LIFE REMAINING
LAMP HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
SOURCE(1) INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE NAME
ENTRY NO.
SOURCE(2) SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
3D FORMAT
SOURCE(3) INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
SYNC TYPE
SOURCE NAME
ENTRY NO.
SOURCE(4) SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
3D...

83
❹ Menu Descriptions & Functions [INPUT]
1:HDMI1
This projects the video of the device connected to the HDMI 1 IN terminal.
2:HDMI2
This projects the video of the device connected to the HDMI 2 IN terminal.
3:DisplayPort
This projects the video of the device connected to the Display Port input terminal.
4:BNC
This projects the video of the device connected to the video input terminal.
(This projects the analog RGB signal or component signal.)
5:BNC(CV)
This projects the video of the device connected to...

84
Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjustment values 
of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the Entry List, 
an error message is then displayed and no additional patterns can be registered. You should thus delete (adjustment values of) 
signals that are no...

85
Entering the currently projected signal into the Entry List [STORE]
1. Press the ▲ or ▼ button to select any number.
2.  Press the ◀ or ▶ button to select [STORE] and press the ENTER button.
 
Calling up a signal from the Entry List [LOAD]
Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [EDIT]
1.  Press the ▲ or ▼ button to select a signal you wish to edit.
2.  Press the ◀, ▶, ▲, or ▼ button to select [EDIT] and press the ENTER button.
  The...