Ricoh Projector PJ WX6181N User Manual
Here you can view all the pages of manual Ricoh Projector PJ WX6181N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
66
Projecting two screens
1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE].
This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu.
2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button.
This displays the [SUB INPUT] screen.
3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.
The [PIP] (PICTURE IN PICTURE) or [PICTURE BY PICTURE] screen set up under [MODE] is projected. (→ page 98)
•...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-80.png "Page 81
66
Projecting two screens
1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE].
This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu.
2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button.
This displays the [SUB INPUT] screen.
3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.
The [PIP] (PICTURE IN PICTURE) or [PICTURE BY PICTURE] screen set up under [MODE] is projected. (→ page 98)
•...")
66 Projecting two screens 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button. This displays the [SUB INPUT] screen. 3. Select the input signal using the ▼/▲ buttons, and press the ENTER button. The [PIP] (PICTURE IN PICTURE) or [PICTURE BY PICTURE] screen set up under [MODE] is projected. (→ page 98) •...
Page 82
![Page 82
67
Switching the main display with the sub-display and vice versa
1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE].
This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu.
2. Select [PICTURE SWAP] using the ▼/▲ buttons and then press the ENTER button.
Display the screen for switching the display positions.
3. Select [ON] using the ▼ button and then press the ENTER button.
The video of the main display will switch with that of...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-81.png "Page 82
67
Switching the main display with the sub-display and vice versa
1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE].
This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu.
2. Select [PICTURE SWAP] using the ▼/▲ buttons and then press the ENTER button.
Display the screen for switching the display positions.
3. Select [ON] using the ▼ button and then press the ENTER button.
The video of the main display will switch with that of...")
67 Switching the main display with the sub-display and vice versa 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [PICTURE SWAP] using the ▼/▲ buttons and then press the ENTER button. Display the screen for switching the display positions. 3. Select [ON] using the ▼ button and then press the ENTER button. The video of the main display will switch with that of...
Page 83
![Page 83
68
Restrictions
• The following operations are enabled only for the main display.
• Audio-visual adjustments
• Video magnification / compression using the partial D-ZOOM/ZOOM +/− buttons.
However, magnification / compression is up to the positions set in [PICTURE BY PICTURE BORDER] only.
• TEST PATTERN
• The following operations are enabled for both the main display and sub-display. These operations cannot be app\
lied individu-
ally.
• Momentary deletion of video / audio
• Video pause
•...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-82.png "Page 83
68
Restrictions
• The following operations are enabled only for the main display.
• Audio-visual adjustments
• Video magnification / compression using the partial D-ZOOM/ZOOM +/− buttons.
However, magnification / compression is up to the positions set in [PICTURE BY PICTURE BORDER] only.
• TEST PATTERN
• The following operations are enabled for both the main display and sub-display. These operations cannot be app\
lied individu-
ally.
• Momentary deletion of video / audio
• Video pause
•...")
68 Restrictions • The following operations are enabled only for the main display. • Audio-visual adjustments • Video magnification / compression using the partial D-ZOOM/ZOOM +/− buttons. However, magnification / compression is up to the positions set in [PICTURE BY PICTURE BORDER] only. • TEST PATTERN • The following operations are enabled for both the main display and sub-display. These operations cannot be app\ lied individu- ally. • Momentary deletion of video / audio • Video pause •...
Page 84
![Page 84
69
❸ Displaying a Picture Using [EDGE BLENDING]
A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and
bottom.This projector is equipped with an “EDGE BLENDING Function” that makes th\
e edges (boundaries) of the projection screen
indistinguishable.
NOTE:
• For projector throw distances, refer to “Throw distance and screen size” on page 231.
• Before performing the Edge Blending function, place the projector in the correct...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-83.png "Page 84
69
❸ Displaying a Picture Using [EDGE BLENDING]
A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and
bottom.This projector is equipped with an “EDGE BLENDING Function” that makes th\
e edges (boundaries) of the projection screen
indistinguishable.
NOTE:
• For projector throw distances, refer to “Throw distance and screen size” on page 231.
• Before performing the Edge Blending function, place the projector in the correct...")
69 ❸ Displaying a Picture Using [EDGE BLENDING] A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and bottom.This projector is equipped with an “EDGE BLENDING Function” that makes th\ e edges (boundaries) of the projection screen indistinguishable. NOTE: • For projector throw distances, refer to “Throw distance and screen size” on page 231. • Before performing the Edge Blending function, place the projector in the correct...
Page 85
![Page 85
70
Preparation:
• Turn on the projector and display a signal.
• When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activate the other
projectors. (→ page 118)
Setting the overlap of projection screens
① Enable [EDGE BLENDING].
1 Press the “Edge Blend.” button.
The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button. The mode
screen will be displayed.
2 Select [MODE] → [ON] and press the ENTER...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-84.png "Page 85
70
Preparation:
• Turn on the projector and display a signal.
• When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activate the other
projectors. (→ page 118)
Setting the overlap of projection screens
① Enable [EDGE BLENDING].
1 Press the “Edge Blend.” button.
The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button. The mode
screen will be displayed.
2 Select [MODE] → [ON] and press the ENTER...")
70 Preparation: • Turn on the projector and display a signal. • When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activate the other projectors. (→ page 118) Setting the overlap of projection screens ① Enable [EDGE BLENDING]. 1 Press the “Edge Blend.” button. The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button. The mode screen will be displayed. 2 Select [MODE] → [ON] and press the ENTER...
Page 86
![Page 86
71
4 Select [CONTROL] → [ON] and press the ENTER button.
Each [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] has its own [CO\
NTROL], [MARKER], [RANGE], and [POSITION].
• For Projector A, set the [CONTROL] for the [TOP], [LEFT] and[BOTTOM] to [OFF]. Similarly for Projector B, set the [CONTROL]
for the [TOP], [RIGHT] and [BOTTOM] to [OFF].
② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images \
projected from
each projector.
Turning on [MARKER] will display markers in...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-85.png "Page 86
71
4 Select [CONTROL] → [ON] and press the ENTER button.
Each [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] has its own [CO\
NTROL], [MARKER], [RANGE], and [POSITION].
• For Projector A, set the [CONTROL] for the [TOP], [LEFT] and[BOTTOM] to [OFF]. Similarly for Projector B, set the [CONTROL]
for the [TOP], [RIGHT] and [BOTTOM] to [OFF].
② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images \
projected from
each projector.
Turning on [MARKER] will display markers in...")
71 4 Select [CONTROL] → [ON] and press the ENTER button. Each [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] has its own [CO\ NTROL], [MARKER], [RANGE], and [POSITION]. • For Projector A, set the [CONTROL] for the [TOP], [LEFT] and[BOTTOM] to [OFF]. Similarly for Projector B, set the [CONTROL] for the [TOP], [RIGHT] and [BOTTOM] to [OFF]. ② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images \ projected from each projector. Turning on [MARKER] will display markers in...
Page 87
![Page 87
72
1 Adjust [RANGE].
Use the ◀ or ▶ button to adjust the overlapped area.
TIP:
• Adjust to overlap one projector’ marker with the other projector’s marker.
2 Adjust [POSITION].
Use the ◀ or ▶ button to align one edge with the other edge of overlapped images.
TIP:
• When displaying a signal with a different resolution, perform the Edge Blending function from the start.
• Setting of [MARKER] will not be saved and return to [OFF] when the projector is turned off.
• To display or hide the marker...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-86.png "Page 87
72
1 Adjust [RANGE].
Use the ◀ or ▶ button to adjust the overlapped area.
TIP:
• Adjust to overlap one projector’ marker with the other projector’s marker.
2 Adjust [POSITION].
Use the ◀ or ▶ button to align one edge with the other edge of overlapped images.
TIP:
• When displaying a signal with a different resolution, perform the Edge Blending function from the start.
• Setting of [MARKER] will not be saved and return to [OFF] when the projector is turned off.
• To display or hide the marker...")
72 1 Adjust [RANGE]. Use the ◀ or ▶ button to adjust the overlapped area. TIP: • Adjust to overlap one projector’ marker with the other projector’s marker. 2 Adjust [POSITION]. Use the ◀ or ▶ button to align one edge with the other edge of overlapped images. TIP: • When displaying a signal with a different resolution, perform the Edge Blending function from the start. • Setting of [MARKER] will not be saved and return to [OFF] when the projector is turned off. • To display or hide the marker...
Page 88
![Page 88
73
Black Level Adjustment
This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING).
Adjust the brightness level if you feel the difference is too large.
NOTE:
This function is enabled only when [MODE] is turned on.
Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
Example: Adjusting the Black Level when placing two projectors side by s\
ide
Width of overlap
Adjust [CENTER] Adjust...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-87.png "Page 88
73
Black Level Adjustment
This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING).
Adjust the brightness level if you feel the difference is too large.
NOTE:
This function is enabled only when [MODE] is turned on.
Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
Example: Adjusting the Black Level when placing two projectors side by s\
ide
Width of overlap
Adjust [CENTER] Adjust...")
73 Black Level Adjustment This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING). Adjust the brightness level if you feel the difference is too large. NOTE: This function is enabled only when [MODE] is turned on. Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on. Example: Adjusting the Black Level when placing two projectors side by s\ ide Width of overlap Adjust [CENTER] Adjust...
Page 89
![Page 89
74
9-segmented portions for Black Level adjustment
The center projector
This function adjusts the brightness level of 9-segmented portions for the center projector and 4-segmented portions for the
left bottom projector as shown below.
TOP-LEFT
BOTTOM-LEFT CENTER-LEFT
TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:
•
The number of black level division screens (maximum of nine divisions) changes depending on the number of ed\
ge blending...](http://img.usermanuals.tech/thumb/64/100453/w300_projector_manual_9119_d-88.png "Page 89
74
9-segmented portions for Black Level adjustment
The center projector
This function adjusts the brightness level of 9-segmented portions for the center projector and 4-segmented portions for the
left bottom projector as shown below.
TOP-LEFT
BOTTOM-LEFT CENTER-LEFT
TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:
•
The number of black level division screens (maximum of nine divisions) changes depending on the number of ed\
ge blending...")
74 9-segmented portions for Black Level adjustment The center projector This function adjusts the brightness level of 9-segmented portions for the center projector and 4-segmented portions for the left bottom projector as shown below. TOP-LEFT BOTTOM-LEFT CENTER-LEFT TOP-RIGHT CENTER-RIGHT BOTTOM-RIGHT TOP-CENTER CENTER CENTER BOTTOM-CENTER TOP-RIGHT CENTER-RIGHT TOP-CENTER TIP: • The number of black level division screens (maximum of nine divisions) changes depending on the number of ed\ ge blending...
Page 90
75 5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation. 2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu. 3. Press the ENTER button on the remote control or the projector...