Ricoh Projector PJ WX4152NI User Manual

Projecting files
1.
Turn the projector on.
1. Press the [Input] button to switch the input signal to [Server]. For details about how to switch the input signal, see page 35 "Projecting an Image".
The list of DLNA servers is displayed.
2. Select the server that has the files to be projected.
The list of files in the root directory is displayed.
If [DLNA Certification Mode] in [Network Application Settings] is specified as [Enable], some
video files do not appear in the file list. For details, see...

• [ ] button: Rotates the image 90° to the right.
• [ ] button: Rotates the image 90° to the left.
• [Menu] button: Returns to the file list screen.
How to control a video
•
[Enter] button: Pauses or restarts the video.
• [ ] button: Fast forwards the video. If a video is paused, displays the next image.
• [ ] button: Rewinds the video. If a video is paused, displays the previous image.
• [ ] button: Increases the volume.
• [ ] button: Decreases the volume.
• [Menu] button: Returns to the file list...

Projecting Images Using Smart Devices
The projector is compatible with Miracast. Using Miracast, the projector can be connected to your smart
device peer-to-peer, and you can project the screen of your smart device on the projection screen.
• For details about supported file types for this function, see page 76 "Projecting Images Using
DLNA-Compatible Devices".
1. Turn the projector on.
2. Press the [Input] button to switch the input signal to Miracast. For details about how to switch the input...

code method is selected, enter the PIN code displayed on the projection screen into your
smart device.
This procedure is not necessary required if [Skip] is selected in Step 3 when the push-button method
is used.
8. On your smart device, select the file you want to project.
The selected file is projected. • For details about how to control the projected image and stop the projection, see the manuals
provided with your smart device.
5. Using the Projector via a Network
82   

6. Using the Interactive Function
(RICOH PJ WX4152NI only)
This chapter explains how to use the interactive function.
Preparations for Using the Interactive Function
(RICOH PJ WX4152NI only)
• To use the interactive function, you must use an RGB cable or an HDMI cable to connect the
projector and computer. You cannot use the interactive function if another type of cable is used for
the connection.
• The interactive function cannot be used when a screen is displayed on the Windows extended desktop.
The...

Step
Setting Contents Reference
3 Enable the projector to recognize the electronic pen. page 88 "Enabling the Projector
to Recognize the Electronic Pen"
4 Install RICOH PJ Interactive Software on a computer. page 90 "Installing RICOH PJ
Interactive Software"• You only need to perform Steps 1 to 3 to use the electronic pen to operate the computer from its
projected image.
• You must perform Steps 1 to 4 to write and draw on the screen.
Enabling Interactive Mode In Interactive Mode, the...

4.
Select [Interactive], and then press the [Enter] button.
5. Select [Interactive Mode], and then press the [Enter] button.
6. Select [On], and then press the [Enter] button. 7.
Press the [Menu] button twice to close the menu screen.
To go on to register a computer USB adapter, see page 85 "Registering the Computer USB
Adapter".
Registering the Computer USB Adapter • Keep computer USB adapter out of reach of children. If a child accidentally swallows a
computer USB adapter, consult a doctor...

Item
Specifications
Operating System • Windows 7 •Windows 8
•
Windows 8.1
• Windows 10
USB port • USB Type A
Do not use a USB hub. 1.
Have a computer USB adapter at hand. 2.
Turn on the projector.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
3. Connect the computer to the projector using an RGB cable or an HDMI cable.
For details about how to connect the computer to the projector, see page 30 "Connecting to the
RGB out port" and page 30...

6.
Select [Default Settings 1], and then press the [ ] button.
7.
Select [Interactive], and then press the [Enter] button.
8. Check that [Interactive Mode] is set to [On].
For the setting procedure, see page 84 "Enabling Interactive Mode".
9. Select [PC Adapter Registration] and press the [Enter] button. 10.
Install the computer USB adapter into the computer.
Upon being installed, the computer USB adapter flickers twice every 0.5 seconds. Preparations for Using the Interactive Function (RICOH PJ...

• If registration succeeds
The message "Registration has completed." appears. The computer USB adapter flickers every
two seconds. Press the [Enter] button to close the message.
• If registration fails
If there are any obstacles between the projector and computer, the attempt to perform
registration will fail.
Registration should complete in under 2 minutes. If it does not complete after 2 minutes,
remove the USB adapter from the computer, and then insert it again.
11. Press the [Menu] button...