Ricoh Projector PJ WX4152NI User Manual

When You Cannot Use the Interactive Function
If you cannot use the interactive function, follow the steps below in the specified order to troubleshoot
the problem.
Step Check item
Solutions
1 Check the projector to make sure that power is supplied
to it. If the projector is not supplied with power, check the power
cord for connection and turn on the power. To connect the
cord and turn on the power correctly, see page 35 "Turning
On the Projector".
2 Check to see whether the projector is in...

Step Check item
Solutions
8 Check to see whether the battery of the electronic pen
is out of charge. When the power switch on the electronic pen is turned on,
the communication indicator on the electronic pen flickers. If
the indicator fails to flicker, check that a rechargeable
battery is installed in the electronic pen. If a rechargeable
battery is installed, recharge it. For details, see page 96
"Installing a Rechargeable Battery into the Electronic Pen"
and page 98 "Recharging the...

When the Projected Screen Cannot Be
Operated As Wanted
This section explains what to do when the projected screen cannot be operated as wanted.
Problem
Solutions
The location the pen nib points at does not
correspond with what is displayed on the screen. • Change the display settings using the
computer's graphic driver, so that the screen
projected is not scaled by the computer.
(Example: Display > General Settings >
Scaling > Maintain Display Scaling)
• Change the computer output settings so that...

6. Using the Interactive Function (RICOH PJ WX4152NI only)
102  

7. Changing the Projector Settings
This chapter explains the settings on the menu screen and how to change the settings.
Viewing the Menu Screen
1. Image Adjustment menu tab
Adjusts the settings for the projected image, such as contrast and brightness.
For the Image Adjustment menu settings, see page 108 "Image Adjustment Menu".
2. Display/Sound Settings menu tab Specifies the settings for image display and sound, such as auto keystone correction and sound quality.
For the Display/Sound Settings...

4. Default Settings 1 menu tab
Specifies the settings for the beep sound, user logo, etc.
For the Default Settings 1 menu settings, see page 118 "Default Settings 1 Menu".
5. Default Settings 2 menu tab
Specifies the settings for the display language, startup password, etc.
For the Default Settings 2 menu settings, see page 120 "Default Settings 2 Menu".
6.
Network/USB Settings menu tab
The Network/USB Settings menu tab includes the USB Settings menu, Network Settings menu, and Network...

Changing the Settings
1. Press the [Menu] button. 2.
Select the menu tab using the [ ] and [ ] buttons.
If you select the Display Status tab, you can confirm the information in this step.
3. Press the [ ] button.
4. Select the item to be changed using the [ ] and [ ] buttons.
5. Press the [Enter] button.
If [To settings] is displayed on the right, the item has a submenu. Select an item on the submenu,
and then press the [Enter] button.
If [Execute] is displayed to the right of the item you select, the...

• Inputting numbers
Use the number buttons on the remote control to input numbers. • Inputting text
Use the keyboard that is displayed on screen to input text. You can also use the number
buttons on the remote control to input numbers.
7. If a confirmation screen appears, select [OK], and then press the [Enter] button.
8. Press the [Menu] button.
9. If a confirmation screen appears, select [Reflect], and then press the [Enter] button. • The Network/USB Settings menu tab includes the USB Settings menu,...

Restoring All the Settings to Their Defaults
1. Press the [Menu] button. 2.
Select [Default Settings 2], and then press the [ ] button.
3. Select [Reset All], and then press the [Enter] button. 4.
Select [OK] in the confirm screen, and then press the [Enter] button. • The start menu is displayed after [Reset All] is executed. For details about the start menu, see
page 36 "When the start menu is displayed".
• The following settings cannot be reset with this function:
•
[User Logo] in [Default...

Image Adjustment Menu
Item
Default
Picture Mode Select the picture mode.
This function is not available when you select [On] in [3D Projection]
under [Display/Sound Settings] or [On] in [Interactive Mode] under
[Default Settings 1].• Bright
This image mode makes it easier to see the projection in bright
locations.
•
Standard
This is the standard image mode.
• Photo Photos appear more natural in this mode.
• Video Video is smoother in this mode.
• DICOM Sim. Mode In this image mode, the images are...