Ricoh Projector PJ WX4152NI User Manual

Item
Default
R-level Adjust the level of red in the image. The greater the value, the stronger the
color red is in the image. 0
G-level Adjust the level of green in the image. The greater the value, the stronger
the color green is in the image. 0
B-level Adjust the level of blue in the image. The greater the value, the stronger
the color blue is in the image. 0
Color Saturation Adjust the color saturation of the image. The greater the value, the richer
the image.
This function is available when you...

Item
Default
RGB Input Range Select the RGB input range.
This function is available when you select [HDMI] (RGB signals) as an
input signal.• Auto
The projector switches RGB input range according to the settings of
the connected equipment.
•
Standard
Select this mode when the color black in the image is light.
• Full Select this mode when dark parts in the image are too dark. Auto
Auto Set Signals Automatically adjust the items in [Detailed Signal Settings].
This function is available when you select...

Item
Default
Detailed Signal Settings > Clamp Pulse 2 Adjust the clamp pulse width.
This function is available when you select [Computer] as an input signal. 0 to 255
*1 *1
The default of [Phase], [Clamp Pulse 1], and [Clamp Pulse 2] is variable because the projector automatically
adjusts these settings according to the input signal. Image Adjustment Menu
111  

Display/Sound Settings Menu
Item
Default
Auto Keystone Specify whether or not to implement keystone correction automatically
depending on the angle of the projector's position. On
Keystone Adjust for keystone distortion.
To decrease the width of the bottom of the projected image, decrease the
value. To decrease the width of the top of the projected image, increase
the value. 0
Zoom Reduce the size of the image if the projected image is larger than the
screen. The image can be reduced in a range of 80...

Item
Default
Aspect Select the aspect ratio of the image.
This function is not available when you select [USB Memory] or [Server]
as an input signal. When you select [Network PC] as an input signal, this
function is available only while you are projecting a computer's screen
using QuickProjection.• Normal
Display in full screen without changing the input signal aspect ratio.
•
16:9
Display using 16:9 aspect ratio (1280 × 720 resolution).
• Full Display using 1280 × 800 resolution.
• Native Display...

Item
Default
Wall Color Mode Select the image hue according to the projection surface when the image
is being projected on something other than a screen.• Off
•
Whiteboard
• Beige
• Gray
• Blackboard (Green) Off
3D Projection > 3D Projection Specify whether or not to use 3D projection.
The image will be slightly darker if this is set to [On].
3D projection and interactive mode cannot be enabled simultaneously. If
you change this setting to [On], [Interactive Mode] in [Default Settings 1]
is switched to...

Item
Default
Closed Caption The projector supports closed captioning, which allows subtitles to be
displayed at the bottom of the picture. This is pursuant to the regulations
set forth by the US Federal Communications Commission (FCC).
Select [CC-1] to [CC-4] to display the dialogue and narration of TV
programs and videos that are closed captioned.
This function is available when you select [Video] as an input signal.• Off
•
CC-1
• CC-2
• CC-3
• CC-4 Off
Sound Quality Select the sound quality of the...

Energy Saving Settings Menu
Item
Default
Lamp Power Select the lamp power level.
To save energy, select the eco mode. To make images brighter, select
the standard mode.
The lamp power is switched to the standard mode regardless of this
setting when [DICOM Sim. Mode], [3D Projection], or [Interactive
Mode] is enabled.• Eco
•
Stnd. Stnd.
Lamp Pwr on No Signal Specify whether or not to lower the lamp power when there is no input
signal. If you select [Eco], the projector lowers the lamp power thirty
seconds...

Item
Default
Power on Standby Specify whether or not to save energy while in standby.• Eco
You can save energy while in standby, but start-up time is slower.
•
Q'ck On
You can turn on the projector quickly, but the standby energy level
is higher. Eco
NW Settings on Standby Select a network function to be enabled while in standby. You can save
energy by disabling the network function.
This function is available when you select [Eco] in [Power on Standby].• Do not Use
Disable the wired LAN and the...

Default Settings 1 Menu
Item
Default
Auto Input Search Specify whether or not to switch to another input signal that the projector
detects when you press the [Input] button. On
Beep Specify whether or not to beep during use. On
Background on No Signal Select the image display when there is no input signal.• Logo
•
Blue
• None Logo
Display Guidance Specify whether or not to display the guidance for operating the
projector. On
Start-up Screen Specify whether or not to display the start-up screen when the...