Ricoh Projector PJ WX4152NI User Manual

Item
Default
Interactive > Interactive Mode (RICOH PJ WX4152NI only) Specify whether or not to enable the interactive mode. For details about
the interactive mode, see page 83 "Using the Interactive Function
(RICOH PJ WX4152NI only) ".
The interactive mode and 3D projection cannot be enabled
simultaneously. If you change this setting to [On], [3D Projection] in
[Display/Sound Settings] is switched to [Off]. Off
Interactive > PC Adapter Registration (RICOH PJ WX4152NI only) Register the computer...

Default Settings 2 Menu
Item
Default
Language Select the display language.
Available languages are as follows:
English, Japanese, Spanish, Russian, French, Portuguese, German,
Italian, Dutch, Polish, Swedish, Norwegian, Danish, Romanian, Turkish,
Arabic, Thai, Indonesian, Traditional Chinese. English
Current Time > Date/Time Specify the current date and time. (Not programmed)
Current Time > Time Zone Specify the time zone of the location where the projector is used by
selecting the time difference to UTC...

Item
Default
Projection Mode Select the projection method according to how the projector is
positioned.• Standard
Select this mode when the projector is placed in front of a screen.
•
Rear
Select this mode when the projector is placed behind a screen.
• Ceiling Select this mode when the projector is mounted on the ceiling in front
of a screen.
• Rear Ceiling Select this mode when the projector is mounted on the ceiling behind
a screen. Standard
Remote Control ID Select the projector remote control ID....

Item
Default
High Altitude Mode The number of fan rotations is high when set to [On]. The air is thin at high
elevations, so the cooling efficiency of the projector is reduced. Select
[On] when using the projector at an altitude of more than 1,500 meters
(4,921 feet). Do not select [On] when the altitude is less than 1,500
meters (4,921 feet). Off
Key Lock Specify whether or not to lock the buttons on the control panel. You can
change this setting to [Off] by pressing the [AV Mute] button on the...

USB Settings Menu
This section explains the items in USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
•
[USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image...

Common
Item
Default
Auto Start Slideshow Specify whether or not to start a slide show automatically when the
projector is connected to the USB device. Off
Remove USB Mem. The USB device can be removed when this command is executed. -Display Status
USB Memory
Item
Default
USB Memory Free Space (KB) Display the space available on the USB device (Displayed in KB). -
USB Memory Access Status Display whether or not the USB device can be accessed. -Firmware Version
Item
Default
Network/USB Func. Firmware...

Network Settings Menu
This section explains the items in Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup], [EAP Type], [Import Client Certificate], [Client Certificate User
Name], [Client Certificate List], [Import CA Certificate], [CA Certificate List], [Delete Client/CA
Certificate], [MS-CHAP v2...

TCP/IP Settings
Item
Default
DHCP Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. When [Disable] is selected, enter the IP address,
subnet mask, and default gateway manually. Enable
IP Address Enter the projector's IP address. 0.0.0.0
Subnet Mask Enter the subnet mask. 0.0.0.0
Default Gateway Enter the default gateway. 0.0.0.0Wireless LAN
Simple Settings
Item
Default
Simple Wireless LAN Setup Acquire the wireless LAN...

Item
Default
Communication Mode Select the wireless LAN communication mode.• Infrastructure
Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
•
Adhoc
Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode. Adhoc
SSID Enter the SSID to connect to a wireless...

Item
Default
Default Gateway Enter the default gateway. 0.0.0.0Security
Item
Default
Authentication Method Select the wireless LAN authentication method.• Open System
•
WEP Shared Key
• WPA/WPA2-PSK
• WPA2-PSK
• WPA/WPA2-EAP
• WPA2-EAP Open System
Encryption Method Select the wireless LAN encryption method.• No Encryption
Communication is not encrypted. You can select [No Encryption]
if you select [Open System] in [Authentication Method].
•

WEP
You can select [WEP] if you select [Open System] in...