Ricoh Projector PJ WX4152NI User Manual

Item
Default
Transmission WEP Key Number Select the Key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].• 1
•
2
• 3
• 4 1
Network Key Enter the WEP key when you select [Open System] or [WEP Shared
Key] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit
WEP, up to 26 characters can be used for hexadecimal and up to...

Item
Default
Client Certificate User Name Enter the client certificate user name used for WPA/WPA2-EAP or
WPA2-EAP when [EAP-TLS] is selected in [EAP Type].
This setting is optional. If it is blank, the default value of the certificate
will be used to decrypt the certificate. (blank)
Client Certificate List Displays a list of imported client certificates. -
Import CA Certificate Imports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is
selected in [Authentication Method]. -
CA Certificate List...

Reset Wireless LAN Settings
Item
Default
Reset Wireless LAN Settings The following wireless LAN settings are reset to their defaults:
Communication Mode, SSID, Channel, Authentication Method,
Encryption Method, Transmission WEP Key Number, Network Key,
DHCP, IP Address, Subnet Mask, Default Gateway. -LAN Common
Specify the wired LAN and wireless LAN settings.
Preferred Default Gateway
Item
Default
Preferred Default Gateway Select the network interface for the projector that is connected to both
wired and...

Projector Search Settings
Item
Default
Projector Search Specify whether or not to search for the projector automatically when
the projector and the device connected to the projector are on the
same network. EnableHTTP Server Settings
Item
Default
HTTP Port Enter an HTTP port that is between 1 and 65535. 80Projector ID
Item
Default
Projector Name Enter an ID to identify the projector on the network. Enter up to 16
characters. You can use alphanumeric characters, hyphens, and periods
for projector names....

Setup Wizard
Item
Default
Network Setting Wizard Open Network Setting Wizard. For details about Network Setting
Wizard, see page 66 "Connecting the Projector to a Network". -Display Status
Wired LAN
Item
Default
Current wired LAN settings are displayed. You can confirm the following
items:
Connection Status, MAC Address, Transmission Speed, IP Address,
Subnet Mask, Default Gateway -Wireless LAN
Item
Default
Current wireless LAN settings are displayed. You can confirm the following
items:...

Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.],
[Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...

Crestron RoomView
Item
Default
Crestron RoomView Specify whether or not to allow the projector to be controlled and
monitored by Crestron RoomView. For details about Crestron
RoomView, see page 169 "Controlling and Monitoring the Projector
Using Crestron RoomView". Disable
Crestron WebUI User Auth. Specify whether or not to restrict access to Crestron WebUI with a
password. Off
Crestron WebUI User Password Enter the password for Crestron WebUI user authentication up to 26
characters. (blank)...

Item
Default
PJLink Password Enter a password used when setting the PJLink authentication. Up to
32 alphanumeric characters can be used. (blank)Security
Item
Default
Administrator Authentication Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:• Changing [Transmission WEP Key Number], [Network Key], [EAP
Type], [Client Certificate User Name],...

Item
Default
Application Password Enter the password to be used for Application Authentication.
Up to 32 alphanumeric characters can be used. (blank)
Reset Security Settings Reset the values of the following settings protected by Administrator
Authentication:
[Transmission WEP Key Number], [Network Key], [EAP Type], [Client
Certificate User Name], [MS-CHAP v2 User Name], [MS-CHAP v2
Password], [Windows Domain Name], [Server Certificate
Authentication], [Intermediate CA Permission], [Crestron WebUI User...

Server
Remote Projection Control
Item
Default
Remote Projection Control Specify whether or not to enable the Remote Projection Control
function. The Remote Projection Control function allows you to project
images from a tablet computer or a smart device via a network.
For details about how to project images using this function, see
page 76 "Projecting Images Using DLNA-Compatible Devices". EnableStill Image
Item
Default
Display Effect Select the display effect for switching the image.• None
•...