Ricoh Mp 7500 Service Manual

Removing Jammed Paper
85
6
APress the key of the section from where you want to remove the jammed
paper.
BAfter each step is complete, press [Next]. To go back to the previous step,
press [Previous].
CWhen the jammed paper is entirely removed, restore the machine to its
original state.
Note
❒More than one misfeed may be indicated. When this happens, check all the
areas indicated. 

Clearing Misfeeds
86
6
Removing Jammed Paper
The following procedure explains how to remove jammed paper.
Important
❒The fusing section of this machine might be very hot. Caution should be taken
when removing misfed paper.
When A is lit
When B is lit
 When C is lit
ANS002S
ANS003S
ANS004S 

Removing Jammed Paper
87
6
 When D is lit
When E is lit
ANS005S
ANS006S 

Clearing Misfeeds
88
6
 When F is lit
 When N1 is lit (when Z-Folding Unit is installed)
 When N2 or N3 is lit (when Z-Folding Unit is installed)
ANS007S
ANS008S
ANS009S 

Removing Jammed Paper
89
6
 When P1 is lit
 When P2 is lit
 When Q is lit (when Interposer is installed)
ANS010S
ANS011S
ANS012S 

Clearing Misfeeds
90
6
 When R1 - R8 is lit (when 3,000 Sheet-50 Sheet Staple Finisher is installed)
ANS013S 

Removing Jammed Paper
91
6
 When R1 - R12 is lit (when Booklet Finisher is installed)
ANR019S
ANS015S 

Clearing Misfeeds
92
6
 When R1 - R7 is lit (when 3,000 Sheet-100 Sheet Staple Finisher is installed)
ANS016S 

Removing Jammed Paper
93
6
 When W is lit (when Mailbox is installed)
 When U is lit (when Large Capacity Tray (LCT) is installed)
Note
❒Inside the finisher, or inside the front cover, there is a sticker explaining how
to remove misfed paper.
❒If a detailed removal instruction appears on the right of the screen, follow it.
❒You can also use the procedure indicated in [System Status] to remove jammed
paper.
ANS017S
ANS018S 

Clearing Misfeeds
94
6Removing Jammed Staples
This section explains how to remove jammed staples.
Important
❒Curled paper may cause staples to jam. To avoid this, turn copy paper over
in the tray.
❒When the finisher is installed, after removing jammed staples, staples will not
be ejected the first few times you try to use the stapler.
Remove the jammed staples according to the finisher type. (Check the type if
you are unsure.) For details about type of finisher, see “Options”, About This
Machine.
3,000...