Ricoh B230 Service Manual

 
SM 5-225 B230/B237 
Service 
Tables 
001  This program disables copying. 
 
5120 [Mode Clear Opt. 
Counter Removal] *CTL[0: Yes (removed)/ 1: Standby (installed 
but not used)/ 2: No (not removed)] 
001 This program updates the information on the optional counter. When you install 
or remove an optional counter, check the settings. 
 
5121 [Counter Up Timing] *CTL
[0: Feed/ 1: Exit] 
001 This program specifies when the counter goes up. The settings refer to “paper 
feed” and “paper exit” respectively....

 
B230/B237 5-226  SM 
5150 [By-Pass Length 
Setting] *CTL
[0: OFF/ 1: ON] 
001 Determines whether the transfer sheet from the by-pass tray is used or not. 
Normally the paper length for sub scanning paper from the by-pass tray is 
limited to 600 mm, but this can be extended with this SP to 1260 mm. 
 
5162 [App. Switch Method] *CTL
[0: Soft Key Set/ 1: Hard Key Set] 
001  This program specifies the switch that selects an application program. 
 
[Fax Printing Mode at Optional] 
5167 Enables or disables...

 
SM 5-227 B230/B237 
Service 
Tables 
 
ƒ  The copy data security option will not operate correctly after 
installation until this SP is turned on. 
ƒ  This SP is not displayed until the machine is powered on with the Copy 
Data Security Setting board installed. 
 
[By-pass Size Error Detection] 
5179 
Turns on or off the by-pass tray size error message. 
001 -  *ENG[0 or 1 / 0 / 1/step] 
0: OFF 
1: ON (Paper size error message is 
displayed when the paper jam occurs due 
to the wrong direction of set...

 
B230/B237 5-228  SM 
007  TRAY 3: 2 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: DLT   
008  TRAY 3: 3 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG   
009  TRAY 3: 4 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B5 LEF, 1: Exe LEF   
010  TRAY 4: 1  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A4 LEF, 1: LT LEF   
011  TRAY 4: 2  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: DLT   
012  TRAY 4: 3  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG   
013  TRAY...

 
SM 5-229 B230/B237 
Service 
Tables 
004 Duplex Printout High/Low 
Position [–10 to 10 / 0 / 1 mm/step] 
 
[Set Time] 
5302 Adjusts the RTC (real time clock) time setting for the local time zone. 
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.) 
DOM: +540 (Tokyo) 
NA: -300 (New York) 
EU: + 60 (Paris) 
CH: +480 (Peking) 
TW: +480 (Taipei) 
AS: +480 (Hong Kong) 
002 Time Difference  *CTL
# [-1440 to 1440 / Area / 1 min./step ] 
 
5307 [Summer Time] 
Setting  [ 0 to 1 / NA, EU, ASIA / 1...

 
B230/B237 5-230  SM 
5th and 6th digits: The hour. [00 to 23] 
7th digit: The length of the advanced time. [0 to 9 / 1 hour    /step] 
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step] 
For example: 3500010 (EU default) 
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March 
ƒ  The digits are counted from the left. 
ƒ  Make sure that SP5-307-1 is set to 1. 
Rule Set (End)  -  - 
004 Specifies the end setting for the summer time mode. 
There are 8 digits in this SP....

 
SM 5-231 B230/B237 
Service 
Tables 
Method 
 
5404 [User Code Counter Clear] 
001  UCodeCtrClr    Clears all counters for users. 
 
5501 [PM Alarm] *CTL - 
001 PM Alarm Level [0 to 9999 / 0 / 1 /step] 
0: Alarm  off 
1 to 9999: Alarm goes off when Value (1 to 9999) 
x 1000 ≥ PM counter 
002 Original Count Alarm [0 or 1 / 1 / – ] 
0: No alarm sounds 
1: Alarm sounds after the number of originals 
passing through the ARDF ≥ 10,000 
 
5504 [Jam Alarm] *CTL - 
001 Sets the alarm to sound for the specified...

 
B230/B237 5-232  SM 
001 -  *CTL[0 to 255 / 50/75 (C1a/C1b) / 100 copies 
/step]  
 
5507 [Supply Alarm] *CTL - 
001 Paper Supply Alarm 
0: Off, 1: On, DFU  
002 Staple Supply Alarm 
0: Off, 1: On, Japan only 
003 Toner Supply Alarm 
0: Off, 1: On, DFU 
128 Interval :Others 
132 Interval :A3 
133 Interval :A4 
134 Interval :A5 
141 Interval :B4 
142 Interval :B5 
160 Interval :DLT 
164 Interval :LG 
166 Interval :LT 
172 Interval :HLT [250 to 10000 / 1000 / 1 /step] DFU 
 
5508* [CC Call] *CTL - 
Jam...

 
SM 5-233 B230/B237 
Service 
Tables 
Enables/disables initiating a call when the front door remains open. 
Jam Detection: Time Length 
[3 to 30 / 10 / 1 minute /step] 
011* 
Sets the time a jam must remain before it becomes an “unattended paper 
jam”. This setting is enabled only when SP5508-004 is set to 1. 
Jam Detection: Continuous 
Count [2 to 10 / 5 / 1 /step] 
012* 
Sets the number of consecutive paper jams required to initiate a call. This 
setting is enabled only when SP5508-004 is set to 1....

 
B230/B237 5-234  SM 
001 SC Call 
002 Service Parts Near End 
Call 
003  Service Parts End Call 
004 User Call [0 or 1 / 1 / - ] 
0: Off 
1: On 
006 Communication Test Call
007 Machine Information 
Notice 
008 Alarm Notice 
009 Non Genuine Toner 
Alarm 
010 Supply Automatic 
Ordering Call 
011 Supply Management 
Report Call 
012  Jam/Door Open Call [0 or 1 / 1 / - ] 
0: Off 
1: On 
 
5516 [Individual PM Part 
Alarm Call] *CTL - 
001  Disable/ Enable Setting Enables or disables the PM part alarm call....