Ricoh B230 Service Manual

 
SM 5-235 B230/B237 
Service 
Tables 
 
5610 [ACC Factory Setting] 
Recall - - 
004 
Recalls the factory settings. 
Overwrite - - 
005 
Overwrites the current values onto the factory settings. 
Previous Setting  -  - 
006 
Recalls the previous settings. 
 
5611 [Toner Color in 2C] 
B-C *ENG[0 to 128 / 100 / 1 /step] 
128: Darkest density 
001 
Adjusts the Cyan correction value of the blue signal in two-color mode. 
B-M *ENG[0 to 128 / 100 / 1 /step] 
128: Darkest density 
002 
Adjusts the Magenta...

 
B230/B237 5-236  SM 
128: Darkest density 
Adjusts the Yellow correction value of the blue signal in two-color mode. 
 
5618 [Color Mode Display Selection] 
- *CTL[0 or 1 / 1 / - ] 
0: ACS, Colour, Black & White, Two Colour, 
Single colour 
1: ACD, Full Colour, Black & White   
001 
Selects the color selection display on the LCD. 
 
5801 [Memory Clear] 
NOTE: For more information, see “NOTE 1” following SP8-xxx table. 
001 All Clear 
 Resets all correction data for process control and all software...

 
SM 5-237 B230/B237 
Service 
Tables 
Clears the copy application settings. 
Fax Application  -  - 
007 
Clears the fax application settings. 
Printer Application  -  - 
008 
Clears the printer application settings. 
Scanner Application  -     - 
009 
Clears the scanner application settings. 
Web Service/Network 
Application -   - 
010 
Delete the netfile application management files and thumbnails, and 
initializes the job login ID. 
NCS - - 
011 Initializes the system default and interface settings...

 
B230/B237 5-238  SM 
Initializes the CCS (Certification and Charge-control Service) settings. 
SRM Memory Clr  -  - 
018 
Initializes the SRM (System Resource Manager) settings. 
LCS - - 
019 
Initializes the LCS (Log Count Service) settings. 
WebUapl  - 
020 
Initializes the WebUapl settings. 
 
[Free Run] 
5802 Performs a free run on the copier engine. 
 
ƒ  The machine starts free run in the same condition as the sequence 
of A4/LT, A3 or A4 SEF printing from the 1st or 2nd tray. Therefore, 
the...

 
SM 5-239 B230/B237 
Service 
Tables 
NOTE: Turn the main switch off and on after resetting the SC code. 
001  Fusing SC Reset  -  - 
 
5811 [Machine Serial] Machine Serial Number Display 
002  Display  *ENG Displays the machine serial number. 
 
5812 [Service Tel. No. Setting] 
Service *CTL - 
001 Sets the telephone number for a service representative. This number is 
printed on the Counter List, which can be printed with the user’s “Counter” 
menu. 
This can be up to 20 characters (both numbers and...

 
B230/B237 5-240  SM 
5816 [Remote Service] *CTL
- 
I/F Setting 
001 Selects the remote service setting. 
[0 to 2 / 2 / 1 /step] 
0: Remote service off 
1: CSS remote service on 
2: NRS remote service on 
CE Call 
002 Performs the CE Call at the start or end of the service. 
[0 or 1 / 0 / 1 /step] 
0: Start of the service 
1: End of the service 
ƒ  This SP is activated only when SP 5816-001 is set to “2”. 
Function Flag 
003 Enables or disables the remote service function. 
[0 to 1 / 0 / 1 /step] 
0:...

 
SM 5-241 B230/B237 
Service 
Tables 
Specifies the connect timeout interval when calling the RCG. 
[1 to 90 / 10 / 1 second /step] 
RCG Write Timeout 
009 
Specifies the write timeout interval when calling the RCG. 
[1 to 100 / 60 / 1 second /step] 
RCG Read Timeout 
010 
Specifies the read timeout interval when calling the RCG. 
[1 to 100 / 60 / 1 second /step] 
Port 80 Enable  - 
011 Enables/disables access via port 80 to the SOAP method. 
[0 or 1 / 0 / – ] 
0: Disabled 
1: Enabled 
RCG – C Registed...

 
B230/B237 5-242  SM 
062 Use Proxy This SP setting determines if the proxy server is 
used when the machine communicates with the 
service center. 
Proxy Host 
063 This SP sets the address of the proxy server used for communication 
between Cumin-N and the gateway. Use this SP to set up or display the 
customer proxy server address. The address is necessary to set up Cumin-N. 
ƒ  The address display is limited to 128 characters. Characters beyond 
the 128 character are ignored.   
ƒ  This address is...

 
SM 5-243 B230/B237 
Service 
Tables 
ƒ  This name is customer information and is not printed in the SMC 
report. 
CERT: Up State 
Displays the status of the certification update. 
0  The certification used by Cumin is set correctly. 
1 The certification request (setAuthKey) for update has been received 
from the GW URL and certification is presently being updated. 
2 The certification update is completed and the GW URL is being notified 
of the successful update. 
3 The certification update failed, and...

 
B230/B237 5-244  SM 
completed, but an certification error has been received, and the rescue 
certification is being recorded. 
18 The rescue certification of No. 17 has been recorded, and the GW URL 
is being notified of the failure of the certification update. 
CERT: Error 
Displays a number code that describes the reason for the request for update 
of the certification. 
0  Normal. There is no request for certification update in progress. 
1 Request for certification update in progress. The current...