Ricoh B230 Service Manual

 
SM 5-265 B230/B237 
Service 
Tables 
ƒ  After you do this SP, go out of the SP 
mode, and then turn the power off.   
ƒ  Do not remove the SD card until the 
Power LED stops flashing. 
Search Option 
060 This SP uses bit switches to set up the fuzzy search options for the UCS local 
address book. 
Bit: Meaning 
0: Checks both upper/lower case characters 
1: Japan Only 
2: Japan Only 
3: Japan Only 
4 to 7: Not Used   
Complexity Option 1 
062 Use this SP to set the conditions for password entry to...

 
B230/B237 5-266  SM 
 
[Rep Resolution Reduction] *CTL - 
5847 5847 1 through 5847 8 changes the default settings of image data transferred 
externally by the Net File page reference function. [ 0 to 5 / 2 / 1 /step] 
5847 21 sets the default for JPEG image quality of image files handled by 
NetFile. 
“Net files” are jobs to be printed from the document server using a PC and 
the DeskTopBinder software. 
001  Rate for Copy Color 
002  Rate for Copy B&W Text 
003  Rate for Copy B&W Other 
004  Rate for...

 
SM 5-267 B230/B237 
Service 
Tables 
002 Access Ctrl: Repository (only 
Lower 4 bits) 0000: No access control 
0001: Denies access to DeskTop Binder. 
0010: No writing control 
003 Access Control: Doc. Svr. 
Print (Lower 4 bits) 
004 Access Control: User 
Directory (only Lower 4 bits) 
005 Access Cntl: For Cherry(only 
lower 4bits) 
007 Access Ctrl: Comm. Log Fax 
(Lower 4 bits) 
009 Access Ctrl: Job Ctrl (Lower 
4 bits) 
011 Access Ctrl: Device 
management (Lower 4 bits) 
021 Access Ctrl: Delivery...

 
B230/B237 5-268  SM 
216 Setting: Interval Time 
217 Setting: Timing 
 
5849 [Installation Date] *CTL - 
5849 1  Display The “Counter Clear Day” has been changed 
to “Installation Date” or “Inst. Date”.   
5849 2  Switch to Print Determines whether the installation date is 
printed on the printout for the total counter. 
[0 or 1 / 1 / - ] 
0: No Print   
1: Print     
 
5850 [Address Book Function]  *CTL - 
Replacement of Circuit Classification Japan Only 
003 The machine is sold ready to use with a G3...

 
SM 5-269 B230/B237 
Service 
Tables 
[Remote ROM Update] 
5856 
Allows the technician to upgrade the firmware using a local port (IEEE1284) 
when updating the remote ROM.   
002 Local Port  *CTL[0 to 1 / 0 / 1/step] 
0: Disable 
1: Enable 
 
5857 [Save Debug Log] *CTL - 
On/Off (1:ON 0:OFF) 
0: OFF, 1: ON 
5857 1 
Switches the debug log feature on and off. The debug log cannot be captured 
until this feature is switched on.   
Target (2: HDD 3: SD) 
2: HDD, 3: SD Card 
5857 2 Selects the storage device...

 
B230/B237 5-270  SM 
015  Copy SD to SD (Latest 4 MB Any Key) 
016  Make HDD Debug 
017  Make SD Debug 
 
[Debug Save When] *CTL - 
5858 These SPs select the content of the debugging information to be saved to the 
destination selected by SP5857-002. 
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of 
SC error codes. 
001  Engine SC Error Turns on/off the debug save for SC codes 
generated by copier engine errors. 
[0 or 1 / 0 / 1/ step] 
0: OFF, 1: ON 
002  Controller SC...

 
SM 5-271 B230/B237 
Service 
Tables 
006 Key 6 
007 Key 7 
008 Key 8 
009 Key 9 
010 Key 10 
 
5860 [SMTP/POP3/IMAP4] *CTL 
- 
020 Partial Mail Receive Timeout 
[1 to 168 / 72 / – ] 
 Sets the amount of time to wait before saving a mail that breaks up during 
reception. The received mail is discarded if the remaining portion of the mail is 
not received during this prescribed time.   
021  MDN Response RFC2298 Compliance 
[0 to 1 / 1 / – ] 
 Determines whether RFC2298 compliance is switched on for MDN...

 
B230/B237 5-272  SM 
ƒ  This SP is activated only when SMTP authorization is enabled by UP 
mode. 
 
5866 [E-mail Alert] Not Used 
001 Report Validity  - Enables or disables the E-mail alert 
function. 
[0 or 1 / 0 / – ] 0: Enabled, 1: Disabled 
005  Add Date Field  *CTL Adds or does not add the date field to the 
header of the alert mail. 
[0 or 1 / 0 / – ]   
0: Not added, 1: Added 
 
5870 [Common Key Info Writing] 
001 Writing  *CTL Writes to flash ROM the common proof for 
validating the device for...

 
SM 5-273 B230/B237 
Service 
Tables 
001 Reboot Setting  *CTL Enables or disables the automatic reboot 
function when an SC error occurs. 
[0 or 1/ 0 / – ] 
0: The machine reboots automatically 
when the machine issues an SC error and 
logs the SC error code. If the same SC 
occurs again, the machine does not 
reboot. 
1: The machine does not reboot when an 
SC error occurs. 
The reboot is not executed for Type A or C 
SC codes. 
002 Reboot Type  *CTL Selects the reboot method for SC. 
[0 or 1 / 0 / -]...

 
B230/B237 5-274  SM 
3: Forbid fax TX (1) 
4: Forbid scan sending (1) 
5: Forbid downloading (1) 
6: Forbid delete (1) 
7: Reserved 
 
[Permit ROM Updating] DFU 
5886 
This SP determines whether the ROM can be updated. 
001 -  *CTL   [0 or 1 / 0 / 1/step] 
0: ON, 1: OFF 
 
[Plug & Play Maker/Model Name] Plug & Play Name Selection 
5907 Specifies the manufacturer and model name. These names are registered in 
the NVRAM. If the NVRAM becomes defective, these names should be 
re-registered. 
001 Plug/Play...