Ricoh Aficio MP2510SP User Manual

Network Settings
33
1
❖[Network] → [NW Frame Type] → [Ethernet 802.2]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet 802.3]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[Network] → [NW...

Connecting the Machine
34
1
❖[Network] → [Ping Command]
 Web Image Monitor: Cannot be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting.
❖[Network] → [Permit SNMP V3 Communication] → [Encryption Only]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[Network]...

Network Settings
35
1
❖[IEEE 802.11b] → [Communication Mode]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[IEEE 802.11b] → [SSID Setting]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[IEEE 802.11b] → [Channel]
 Web Image...

Connecting the Machine
36
1
❖[File Transfer] → [Reception Protocol]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting.
❖[File Transfer] → [POP3 / IMAP4 Settings]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting.
❖[File Transfer] →...

Network Settings
37
1
❖[File Transfer] → [Fax E-mail Account]
 Web Image Monitor: Cannot be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting.
❖[File Transfer] → [Scanner Recall Interval Time]
 Web Image Monitor: Cannot be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting.
❖[File...

Connecting the Machine
38
1Connecting the Machine to a Telephone 
Line and TelephoneThis section describes how to connect the machine to the telephone lines and se-
lect the line type.
Connecting the Telephone Line
This section describes how to connect the machine to the telephone lines.
To connect the machine to a telephone line, use a snap-in modular type connector.
Important
❒Make sure the connector is the correct type before you start.
1.External telephone connector
2.G3 (analog) line interface...

39
2. System Settings
This chapter describes user tools in the System Settings menu. For details on
how to access System Settings, see Accessing User tools (System Settings).
General Features
This section describes the user tools in the General Features menu under System
Settings.
Default settings are shown in bold type.
❖Panel Tone
The beeper (key tone) sounds when a key is pressed.
The default setting is On.
❖Warm Up Notice (copier/Document Server)
You can have the beeper sound when the machine becomes...

System Settings
40
2
❖Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function.
This is useful if you are making many copies and have to change settings for
each copy. If you set a longer reset period, you can prevent interruption from
other functions.
The Function Reset Timer setting is ignored if [Interleave] is set for Print Priority.
The default setting is Set Time.
When you select [Set Time], enter the time (3–30 seconds, in 1...

General Features
41
2
❖Size Setting
Currently three types of F size are available; 81/2×13L, 81/4×13L and
8×13L. The ADF or exposure glass cover sensor cannot distinguish these
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be
used for F size originals based on this setting.
The default setting is 8
1/2×13L.
Reference
p.3 “Accessing User Tools”
Function Compatibility, Copy/Document Server Reference
Output...

System Settings
42
2Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
❒If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖Paper Tray Priority:...