Ricoh Aficio MP2510SP User Manual

Parameter Settings
123
4 Parameter Settings
This section describes Parameter Settings.
User Parameters allow you to customize various settings to suit your needs. To
change function settings, set the User Parameter Switches.
❖Switches and Bits
Each User Parameter has a set of switches, and each of the switches consist of
eight bits, whose values are “0 or “1. The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between “0...

Facsimile Features
124
4
05 0 Receive Service Call (SC) Condition (Substi-
tute Reception during service call)Possible 
(Substitute 
RX)Not possi-
ble (Recep-
tion off)
05 2,1 Substitute the reception when the machine 
cannot print (because paper is jammed, all 
paper trays have run out of paper, toner is 
empty, or all paper trays are out of order)00: Enabled 
uncondi-
tionally 
(Free)
01: Enabled 
when Own 
Name/
Own Fax 
Number is 
received
10: Enabled 
for Closed 
Network 
Code match
11: Disabled...

Parameter Settings
125
4
14 2 Batch Transmission Off On
14 3 Reset when function changed Off On
17 2 Whether you need to press [Add] after speci-
fying a destination with the Destination key 
when broadcastingNot neces-
saryNecessary
17 7 Receive documents by pressing the {Start} 
key when originals are not set.Off (no doc-
uments re-
ceived after 
pressing 
the {Start} 
key)On (docu-
ments re-
ceived after 
pressing 
the {Start} 
key)
18 0 Print date with Fax Header Off On
18 1 Print transmitter origin...

Facsimile Features
126
4
20 5,4,3,2 Reprinting time of stored documents in 
memory that could not be printed using 
LAN-Fax Driver0000:
0 minutes
0001:
1 minutes
0010:
2 minutes
0011:
3 minutes
0100:
4 minutes
0101:
5 minutes
0110:
6 minutes
0111:
7 minutes
1000:
8 minutes
1001:
9 minutes
1010:
10 minutes
1011:
11 minutes
1100:
12 minutes
1101:
13 minutes
1110:
14 minutes
1111:
15 minutes-
21 0 Print results of sending Reception Notice Re-
quest messageOff 
(print only 
when an er-
ror occurs)On
21 1...

Parameter Settings
127
4
22 1 Detect a dial tone before sending faxes when 
using the telephone line (LINE2)Not detect 
(Off)Detect 
(On)
22 2 Detect a dial tone before sending faxes when 
using the telephone line (LINE3)Not detect 
(Off)Detect 
(On)
24 0 Store documents that could not be transmit-
ted in memoryOff On
24 1 Length of time documents that could not be 
transmitted are stored in memory24 hours 72 hours
25 4 RDS Off On
32 0 Select which order of priority to be used to 
select an alternative...

Facsimile Features
128
4
Changing the User Parameters
This section describes how to set parameters.
Important
❒Access to some User Parameter Settings may require options, or other settings
may need to be made beforehand.
❒It is recommended that you print and keep a User Parameter list when you
program or change a User Parameter.
❒Do not change any bit switches other than those shown on the previous pages.
APress [Facsimile Features].
BPress [Administrator Tools].
CPress [Parameter Setting].
DSelect the...

Parameter Settings
129
4
Printing the User Parameter List
This section describes how to print the User Parameter List.
Print this list to see the current User Parameter settings. However, only items of
importance or often-used items are included in the list.
APress [Facsimile Features].
BPress [Administrator Tools].
CPress [Print List] next to Parameter Setting.
DPress the {Start} key.
To cancel printing a list before pressing the {Start} key, press [Cancel] or the
{Clear/Stop} key.
To cancel printing a...

Facsimile Features
130
4Special Senders to Treat Differently
This section describes Special Senders settings.
By programming particular senders in advance, you can set the following func-
tion for each sender:
Authorized RX
Forwarding
Reception File Print Qty
Print 2 Sided
Memory Lock
 Paper Tray
Use the Own Name or Own Fax Number to program your senders. If the sender
has a machine of the same manufacturer, program an Own Name that has al-
ready been programmed as a sender. If the machine is not...

Special Senders to Treat Differently
131
4
You can program up to 30 wild cards.
Spaces are ignored when identifications are compared.
You can use wild cards for the following functions:
Forwarding
Special Senders
 Authorized RX (Authorized Reception)
When using Partial agreement, you can enter up to the first 24 characters of
an e-mail address to use it as an own name or facsimile name.
Note
❒You cannot program senders as Special Senders if they do not have Own
Name or Own Fax Number programmed.
❒The...

Facsimile Features
132
4
Authorized Reception
Use this function to limit incoming senders.
The machine only receives faxes from programmed Special Senders, and there-
fore, it helps you screen out unwanted documents, such as junk mail, and saves
wasting fax paper.
Note
❒To use this function, program the Special Senders function, and then select
“On in “Authorized RX with “Reception Settings. See Reception Settings,
and Parameter Settings (switch 08, bit 2).
❒Without programming Special Senders, the...