Philips LaserMFD 6080 User Manual

LFF6080
- 15 -
2 - Installation
2Push the lower panel down until it clicks.
3Setup the back side feed cassette stop by pushing 
the PUSH lever (A). 
Then adjust the lateral paper guides to the paper 
format by pushing lever (B) located on the left 
guide. Adjust the length paper guide to the paper 
format by pushing lever (C).
4Take a paper stack, pull the paper off and align it 
on a flat surface.
5Put the paper stack in the feed cassette 
(200 sheets of 80 g/m² paper for instance).
6Put the feed...

LFF6080
- 16 -
2 - Installation
Paper delivery stop
Adjust the paper delivery stop, depending on the format of 
the document to be printed. Do not forget to raise the flap 
to prevent the sheets from falling down.
Starting your device
Device connection
1Plug the end of the telephone line into the terminal 
socket and the other end into the wall telephone 
socket.
2Plug the end of the LAN cord (as provided by your 
network administrator) into the terminal LAN port 
and the other end into the local network...

LFF6080
- 17 -
2 - Installation
displays the next basic setting.
1Select the desired language using the  or  
buttons and confirm with OK.
2To set the country, press the OK button.
3Select your country in the list displayed using the  
or  buttons and confirm with OK.
4If you have set the country to Other, you may 
need to set the public telephone NETWORK to use. 
Press the OK button to specify it.
 
Select the telephone network to use in the list 
displayed using the  or  buttons and confirm 
with...

LFF6080
- 18 -
2 - Installation
Paper insertion in the manual input 
tray
The manual input tray allows you to use various paper 
formats with greater grammage than the one used in the 
paper feed cassette (refer to the paragraph 
Specifications, page 91).
Only one sheet or envelope can be fed at a time.
1Spread the manual feed guides to the maximum.
2Insert a sheet or an envelope in the manual input 
tray.
3Adjust the paper guides against the right and left 
edges of the sheet or the envelope.
4Print...

LFF6080
- 19 -
3 - Copy
Copy
Your machine has the function to make one or more 
copies.
You can also set up several parameters in order to make 
copies at your will.
Simple copy
In this case, the default parameters are applied.
1Place the document to be copied in the automatic 
document feeder, printed face on the top. 
or 
Place the document to be copied face down on the 
glass, respecting the indications around the glass.
2Press the   button twice. The copy is made 
using the default parameters.
ECO...

LFF6080
- 20 -
3 - Copy
6Adjust the desired zoom level, from 25% TO 400%
with the buttons  or , confirm with the OK
button (only available in 1 Page to 1 copy mode).
7Adjust the desired origin values with the digital 
keyboard buttons  or  then confirm with the OK
button.
8Choose the resolution depending on the printing 
quality that you want AUTO, TEXT, QUALITY 
TEXT or PHOTO with the buttons  or , then 
confirm with the OK button.
9Adjust the contrast level with the buttons  or , 
then confirm...

LFF6080
- 21 -
3 - Copy
3Confirm your choice by pressing the OK button.
4Quit this menu by pressing the   button.
Zoom setup
The ZOOM parameter allows you to reduce or enlarge an 
area of a document by choosing the origin and the zoom 
level to apply to the document, from 25 to 400 %.
 842 - ADVANCED FCT/COPY/ZOOMING
1Press , enter 842 using the keypad.
2Enter the desired zoom level with the 
alphanumerical keypad or choose among 
predefined values with the buttons  and . 
3Confirm your choice by...

LFF6080
- 22 -
3 - Copy
Paper tray selection
The Automatic selection can have two meanings 
depending on the paper format defined on the paper 
trays. The following table describes the different cases.
 852 - ADVANCED FCT/SCAN. & PRINT/TRAY 
PAPER
1Press , enter 852 using the keypad.
2Select the default paper tray to use, AUTOMATIC
or MANUAL, with the buttons  and .
3Confirm by pressing the OK button.
4Quit this menu by pressing the   button.
Sheet-feed analysis margins setup 
If you want to, you can...

LFF6080
- 23 -
4 - Fax
Fax
This chapter describes all the fax processing and 
configuration functions.
You will also find a section describing fax mailboxes.
Fax transmission
Print a header page
A header page is stored in your terminal. To send your fax 
using this header page, you can print it at any time and fill 
in your details.
1Select 30 - FAX /HEADER PAGE.
2Select: 
301 - LOCAL, to print a header page according to 
the language configured on the terminal, 
302 - INTERNAT, to print a bilingual...

LFF6080
- 24 -
4 - Fax
Transmission with auto redial
This function allows you to monitor the dialling operation 
during a fax transmission. In this case, the maximum 
transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber’s fax is engaged and if so, 
choose the moment when the line is clear to start the 
document transmission.
• to control the communication progress in case of 
uncertain numbers, etc.
To take the line manually:
1Place the document in the fax...