Philips Epiq 5 Manual
Have a look at the manual Philips Epiq 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Table 4.46 FILM SESSION SOP CLASS N -CREATE REQUEST ATTRIBUTES Attribute Name Tag VR Value Presence of Value Source Number of Copies (2000,0010) IS Default 1. User defined in Device Configuration. ALWAYS USER Print Priority (2000,0020) CS HIGH ALWAYS AUTO Medium Type (2000,0030) CS BLUE FILM, CLEAR FILM or PAPER* ALWAYS USER Film Destination (2000,0040) CS MAGAZINE or PROCESSOR* ALWAYS USER Film Session Label (2000,0050) LO Philips Medical Systems ALWAYS AUTO *Dependent on the specific printer selected Table 4.47 summarizes the behavior of Hardcopy AE when encountering status codes in an N -CREATE response. Table 4.47 FILM SESSION SOP CLASS N -CREATE RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. Warning Attribute Value Out of Range 0116H System continues operations. Warning Attribute List Error 0107H Same as above. * * Any other status code. The Association is aborted and the print -job fails. 4.2.3.3.1.4 SOP Specific Conformance for the Film Box SOP Class Hardcopy AE supports the following DIMSE operations for the Film Box SOP Class: — N-CREATE — N-ACTION Details of the supported attributes and status handling behavior are described in the following subsections. 4.2.3.3.1.4.1 Film Box SOP Class Operations (N -CREATE) Table 4.48 lists the attributes s upplied in an N-CREATE Request. E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 51
Table 4.48
FILM BOX SOP CLASS N -CREATE REQUEST ATTRIBUTES
Attribute Name Tag VR Value
Presence
of Value Source
Image Display
Format (2010,0010)
ST STANDARD
\1,1
2 or
CUSTOM \xxx depending on printer.
Default is displayed, and is user editable. Edit
only when a valid substitute value is known. ALWAYS
AUTO/USER
Referenced Film
Session
Sequence (2010,0500)
SQ ALWAYS AUTO
>Referenced
SOP Class UID (0008,1150)
UI 1.2.840.10008.5.1.1.1 ALWAYS AUTO
>Referenced
SOP Instance
UID (0008,1155)
UI From created Film Session SOP Instance ALWAYS AUTO
Film Orientation (2010,0040) CS PORTRAIT or LANDSCAPE ALWAYS USER
Film Size ID (2010,0050) CS Depends on configuration file selected.
DICOM Defined Terms plus US_ LETTER. ALWAYS
USER
Magnification
T ype (2010,0060)
CS Default Value = NONE, depending on printer ANAP AUTO
Min Density (2010,0120) US Default value displayed, user editable ALWAYS AUTO/USER
Max Density (2010,0130) US Default value displayed, user editable ALWAYS AUTO/USER
Trim (2010,0140) CS NO ALWAYS AUTO
Configuration
Information (2010,0150)
ST Default value displayed, user editable. Edit only
when a valid substitute value is
known. ALWAYS
AUTO/USER
Table 4.49 summarizes the behavior of Hardcopy AE when encountering status codes in an N -CREATE response.
Table 4.49
FILM BOX SOP CLASS N -CREATE RESPONSE STATUS HANDLING BEHAVIOR
Service Status Further Meaning
Error Code Behavior
Success Success 0000 The SCP has completed the operation
successfully.
Warning Requested Max Density outside of
printer’s operating range
B605H
The N
-CREATE operation is considered
successful but the status meaning is logged.
* * Any other
status code.
The Association is aborted and the job failed.
2 EPIQ pe rforms page compositing of n- up prints (i.e., 2x2, 2,3, etc.) internally and prints the pages as a single Image
Box per page; hence STANDARD \1,1
E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 52
4.2.3.3.1.4.2 Film Box SOP Class Operations (N -ACTION) The Hardcopy AE issues an N -ACTION Request to instruct the Print SCP to print the contents of the Film Box. Table 4.50 summarizes the behavior of Hardcopy AE when encountering status codes in an N -ACTION response. Ta ble 4.50 FILM BOX SOP CLASS N -ACTION RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. The film has been accepted for printing. Warning Film Box SOP Instance hierarchy does not contain Image Box SOP Instances (empty page) B603H The Association is aborted and the job is failed. Failure Unable to create Print Job SOP Instance; print queue is full. C602 Same as B603H above. * * Any other status code. Same as B603H above. 4.2.3.3.1.5 SOP Specific Conformance for the Image Box SOP Class Hardcopy AE supports the following DIMSE operations for the Image Box SOP Class: — N-SET Details of the supported attributes and status handling behavior are described in the following subsections. 4.2.3.3.1.5.1 Image Box SOP Class Operations (N -SET) Table 4.51 lists the attributes supplied in an N -SET R equest. Table 4.51 IMAGE BOX SOP CLASS N -SET REQUEST ATTRIBUTES Attribute Name Tag VR Value Presence of Value Source Image Position (2020,0010) US 1 ALWAYS AUTO Polarity (2020,0020) CS NORMAL ALWAYS AUTO Basic Grayscale Image Sequence (2020,0110) SQ Used for BW (Monochrome2) print ALWAYS* AUTO Basic Color Image Sequence (2020,0111) SQ Used for Color (RGB) print ALWAYS* AUTO >Samples Per Pixel (0028,0002) US 1 for Monochrome2 3 for RGB ALWAYS AUTO >Photometric Interpretation (0028,0004) CS MONOCHROME2 RGB ALWAYS AUTO Planar Configuration (0028,0006) US Always “01”, only used for RGB print. ANAP AUTO E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 53
>Rows (0028,0010) US Depends on film size, number of rows for entire sheet of film ALWAYS Printer Configuration File >Columns (0028,0011) US Depends on film size, number of columns for entire sheet of film ALWAYS Printer Configuration File >Bits Allocated (0028,0100) US 8 ALWAYS AUTO >Bits Stored (0028,0101) US 8 ALWAYS AUTO >High Bit (0028,0102) US 7 ALWAYS AUTO >Pixel Representation (0028,0103) US 0 ALWAYS AUTO >Pixel Data (7FE0,0010) OW Pixels of rendered film sheet. ALWAYS AUTO * Mutually exclusive attributes Table 4.52 summarizes the behavior of Hardcopy AE when encountering status codes in an N -SET response. Table 4.52 IMAGE BOX SOP CLASS N -SET RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. Failure Insufficient memory in printer to store the image. C605 The Association is aborted and the job is failed. * * Any other status code. Same as C605 above. 4.2.3.4 Association Acceptance Policy The Hardcopy Application Entity does not accept Associations. 4.2.4 Verification Application Entity specification 4.2.4.1 SOP Class EPIQ/Affiniti provides Standard Conformance to the following SOP Class: Table 4.53 SOP CLASSES FOR AE VERIFICATION SOP Class Name SOP Class UID SCU SCP Verification 1.2.840.10008.1.1 Yes Yes 4.2.4.2 Association Establishment Policy 4.2.4.2.1 General The DICOM standard application context name for DICOM 3.0 is always proposed: E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 54
Table 4.54 DICOM APPLICATION CONTEXT FOR AE VERIFICATION Application Context Name 1.2.840.10008.3.1.1.1 4.2.4.2.2 Number of Associations EPIQ/Affiniti initiates one Association at a time for a Verification request. Table 4.55 NUMBER OF ASSOCIATIONS INITIATED FOR AE VERIFICATION Maximum number of simultaneous Associations Up to 10, one for each configured remote device Table 4.56 NUMBER OF ASSOCIATIONS ACCEPTED FOR AE VERIFICATION Maximum number of simultaneous Associations Unlimited, however, calli ng AE must be already configured in EPIQ/Affiniti . 4.2.4.2.3 Asynchronous Nature EPIQ/Affiniti does not support asynchronous communication (multiple outstanding transactions over a single Association). Table 4.57 ASYNCHRONOUS NATURE AS A SCU FOR AE VERIFICATION Maximum number of outstanding asynchronous transactions 1 4.2.4.2.4 Implementation Identifying Information The implementation information for this Application Entity is: Table 4.58 DICOM IMPLEMENTATION CLASS AND VERSION FOR AE VERIFICATION Implementation Class UID 1.3.46.670589.14.10000.105 Implementation Version Name EPIQ-AFFIN_1.05 E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 55
4.2.4.3 Association Initiation Policy 4.2.4.3.1 Activity – Verify Remote SCP 4.2.4.3.1.1 Description and Sequencing of Activities The user selecting the “Verify” button on the Device configuration page initiates the verification request to the device whose data has just been configured. This tool allows the user to ensure all data (AE Title, Port and IP Address) was correctly entered and the remote device may be contacted. It uses C -Echo and verifies the remote device supports all configured SOP Classes. Any SOP Cl asses requested that are not supported will report “failed”. Operations may continue, but objects of the type that are not supported will not be exported. EPIQ/Affiniti initiates an Association in order to issue: — C-ECHO request according to the Verification SOP Class. 1. Open Association 2. C-ECHO Request 4. Close Association Verification SCU Verification SCP 3. C-ECHO Response Figure 8a SEQUENCING OF ACTIVI TY – ISSUE VERIFY 4.2.4.3.1.2 Proposed Presentation Contexts EPIQ/Affiniti will propose Presentation Contexts as shown in the following table: E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 56
Table 4.59 PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY VERIFICATION Presentation Context Table Abstract Syntax Transfer Syntax Role Ext. Neg. Name UID Name List UID List Verification 1.2.840.10008.1.1 Implicit VR Little Endian Explicit VR Little Endian 1.2.840.10008.1.2 1.2.840.10008.1.2.1 SCU None 4.2.4.3.1.3 SOP Specific Conformance for Verification When Verification of a remote AE is requested in PSC – Network/DICOM – DICOM Settings, the Association Negotiation Request message contents for each DICOM device will include Presentation Contexts for the following SOP Classes: Table 4.60 SOP CLASS VERIFICATION BY DICOM DEVICE Device Type SOP Classes Requested Additional Notes DICOM Storage Server US Image Storage US Image Storage (Retired) US Multiframe Storage US Multiframe Storage (Retired) Selected non-ultrasound image storage Philips Private 3D Presentation State Comprehensive SR Storage Storage Commitment Push Model Study Root Query Ret rieve-FIND Study Root Query Retrieve -MOVE Verification If SR export to a Storage Server is desired & supported, select Export SR before verification. Storage Commitment requires configuration of both a Storage server and a Storage Commitment server, and association of the Storage server to the Storage Commitment server in the PSC – Network/DICOM – DICOM Selection page. DICOM Commit Server Storage Commitment Push Model Verification Storage Commitment requires configuration of both a Storage server and a Storage Commitment server, and association of the Storage server to the Storage Commitment server in the PSC – Network/DICOM – DICOM Selection page. DICOM PPS Server Modality Performed Procedure Step Verification To activate this server, it must be select ed in the PSC – Network/DICOM – DICOM Selection page. DICOM Worklist Server Modality Worklist Verification To activate this server, it must be selected in the PSC – Network/DICOM – DICOM Selection page. E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 57
DICOM Structured Report Server Comprehensive Struct ured Report Storage Verification Configuration of this device is only required if SRs are to be exported to a dedicated Structured Report Server Storage SCP . To activate this server, it must be selected in the PSC – Network/DICOM – DICOM Selection page. DICOM BW Printer Basic Grayscale META Print Verification All BW printers configure this entry. If the printer supports both BW and Color, then this must be configured to allow BW on that printer. DICOM Color Printer Basic Color META Print Verification May be the same printer if color is also supported. Table 4.61 summarizes the behavior of EPIQ/Affiniti when receiving status codes in a C-ECHO response. Table 4.61 VERIFICATION C -ECHO RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success 0000 Device Status is set to: Verified Refused Out of Resources A700 Device Status is set to: Not Verified Failed Unable to Process C000 – CFFF Device Status is set to: Not Verified * * Any other status code. Device Status is set to: Not Verified Results of a user-initiated Verify are reported as one of three outcomes: • Successfully Verified – All SOP Classes proposed by EPIQ/Affiniti were accepted AND • Verify Failed – Server could not be reached OR remote AE is not running OR no SOP Classes proposed by EPIQ/Affiniti were accepted OR C -ECHO did not return “Success” • Partia lly Verified – Verification SOP Class and at least one other proposed SOP Class were accepted AND C - ECHO returned “Success” AND at least one proposed SOP Class was not accepted 4.2.4.4 Association Acceptance Policy 4.2.4.4.1 Activity – Verification By Remote AE 4.2.4.4.1.1 Description and Sequencing of Activities The system listens on the port configured on the Global System Configuration screen for Verification requests initiated by other remote devices. The calling device AE must already be configured as a remote device i n EPIQ/Affiniti or the association is rejected. E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 58
1. Open Association2. C-ECHO Request 4. Close Association Verification SCPVerification SCU 3. C-ECHO Response Figure 8b SEQUENCING OF ACTIVI TY – VERIFICATION BY REMO TE AE 4.2.4.4.1.2 Accepted Presentation Contexts EPIQ/Affiniti will accept Presentation Contexts as shown in the following table: Table 4.62 ACCEPTABLE PRESENTAT ION CONTEXTS FOR ACTIVITY VERIFICATIO N BY REMOTE AE Presentation Context Table Abstract Syntax Transfer Syntax Role Ext. Neg. Name UID Name List UID List Verification 1.2.840.10008.1.1 Implicit VR Little Endian Explicit VR Little Endian 1.2.840.10008.1.2 1.2.840.10008.1.2.1 SCP None 4.2.4.4.1.3 SOP Specific Conformance for Verification The association request will be rejected if the remote AE is not configured on EPIQ/Affiniti 4.3 NETWORK INTERFACES 4.3.1 Physical Network Interface EPIQ/Affiniti supports both wired and wireless network interface as follows: Table 4.63 SUPPORTED PHYSICAL NETWORK INTERFACE Ethernet 10/100/1000 BaseT, RJ-45, UTP, STP; AutoDetect Speed, Full or Half Duplex Wireless 802.11 G/N using optionally provided wireless adapter only E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 59
If both wired and wireless networks are configured, EPIQ/Affiniti will select the best available network automatically as followed: • The Wired network has priority and it will be used if available • The Wireless network will be automatically used if the wired network is not available. 4.3.2 Additional Protocols EPIQ/Affiniti supports the following additional protocols: • Dynamic Host Configuration Pr otocol (DHCP): If enabled by the user, DHCP is used to acquire network configuration parameters, such as IP address, subnet mask, gateway address, and DNS server addresses from the DHCP server. • Domain Name System (DNS): If configured, DNS is used to look up server network addresses specified by hostname • Wi-Fi Protected Access II (WPA2) Personal (PSK): Wireless encryption method with shared- key authentication. Provides reasonable wireless security in small to medium wireless network environments. • Wi-Fi Pro tected Access II (WPA2) Enterprise: W ireless encryption method with centralized authentication. Provides very good wireless security in medium to large wireless network environments with centralized authentication server support. 4.3.3 IPv4 and IPv6 Support EPI Q/Affiniti supports IPv4 and IPv6 internet protocol s. When IPv4 is used • EPIQ/Affiniti’s network address may be specified as either static IP addresses or DHCP • Remote servers’ network addresses may be specified as either IP address or DNS hostname When IPv6 is used • EPIQ/Affiniti’s network address must be generated automatically as link local address, router discovery address, or assigned by DHCP. Static IPv6 address entry is not supported. • Remote server’ network addresses must be specified by DNS hostname; fixed IPv6 address entry is not supported. • IPv6 versions of DHCP client, DNS client, ICMP, etc. are supported while IPv6 is being used. • IPv6 may be disabled if name resolution to an IPv4 device is problematic in a dual -protocol IPv4/IPv6 network. 4.4 CONFIGURATION 4.4.1 AE Title/Presentation Address Mapping Philips Support Connect, or PSC, is the primary interface on EPIQ/Affiniti for configuring DICOM services. It is reached by pressing the “Support” key on the EPIQ/Affiniti control panel. Additional acquisit ion and export settings are configured in the Setups interface. This interface is reached by selecting Utilities – Setups – Acquisition/Capture. Ensure correct settings are made in “Archive/Print” to associate the selected Acquisition Button(s) to the sel ected configured devices and continue to the Touchscreen button selections as well. Please note to check each touchscreen button individually. 4.4.1.1 Local AE Title All local AEs use the same AE Title and TCP/IP Port configured via the PSC – Network/DICOM – DICO M Settings screen. The system listens on the configured Port for Verification requests from remote AE’s, Storage Commitment N - E7 and E5/A70 and A50 1.5.x.x DICOM Conformance Statement 000490000000111 Rev A Page 60