Panasonic Wv Sp302 Operating Instructions Manual

81
[DDNS]
Select	"On"	or	"Off"	to	determine	whether	or	not	to	use	
the DDNS function. 
Default:	Off
[Host name]
Enter the host name to be used.
Available number of characters: 1 - 64 characters
Default: None (blank)
[User name]
Enter the user name (login name) to access the DDNS 
server.
Available number of characters: 1 - 32 characters
Default: None (blank)
[Password]
Enter the password to access the DDNS server.
Available number of characters: 0 - 32 characters
Default: None (blank)...

82
Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the "Network" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by 
connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
    
[Community]
Enter the community name to be monitored.
Available number of characters: 0 - 32 characters
Default: None...

83
Configure the settings relating to the FTP periodic image transmission 
[FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings relating to the periodic transmission of images to an FTP server can be c\
onfigured on this page. To 
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance. 
(☞ Page 76) Refer to page 90 for descriptions of how to...

84
How to set the schedules
Step 1
Check	the	check	box	of	the	desired	day	of	the	week	of	
"FTP image transmission schedle".
  →  The selected day of the week will be validated for 
the schedule.
Step 2
To designate time, click [C] and select the desired 
"hour" and "minute".
When	not	designating	time,	check	the	checkbox	of	
"24h".
    
Step 3
Click the [Set] button after completing the settings.
  →  The result will be displayed at the bottom of the 
window.
    
Configure...

85
How to delete the set schedule
Step 1
Uncheck	the	check	box	of	the	set	day	of	the	week.
Step 2
Click the [Set] button after completing the settings.
  →  The schedule of the selected day of the week is 
deleted.
     

86
Configure the settings relating to the schedules [Schedule]
On	the	"Schedule"	page,	it	is	possible	to	configure	the	settings	relating	to	schedules	as	follows.	
	 •	 Alarm	permission	(Alarm	input	will	be	received	only	in	the	specified	schedule.)
	 •	 VMD	permission	(Video	motion	detection	will	be	active	only	in	the	specified	schedule.)
	 •	 Access	permission	(Access	to	the	camera	will	be	allowed	only	in	the	specified	schedule.)	
(☞ pages 22 and 23: How to display/operate the setup menu)
Up to 5...

87
Maintenance of the camera [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu can be performed on this\
 page.
The "Maintenance" page has 3 tabs; the [System log] tab, the [Upgrade] t\
ab and the [Default reset] tab.
Check the system log [System log]
Click the [System log] tab of the "Maintenance" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
Up to 4 000 system logs can be saved on the SD memory card when the SD memory card is...

88
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the "Maintenance" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The current firmware can be checked and upgraded to the latest version on this page. Contac\
t the dealer for further 
information about the firmware upgrade. 
    
[Model no.], [MAC address], [Serial no.], [Firmware 
version], [IPL version], [HTML version], [IP 
address(IPv6)], [Viewer software installation coun-
ter]
Information of each item will be...

89
Reset the settings/Reboot the camera [Default reset]
Click the [Default reset] tab of the "Maintenance" page. (☞ Pages 22 and 23: How to display/operate the setup 
menu)
The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed on 
this page.
    
[Reset to the default (Except the network settings)]
Click	the	[Execute]	button	to	reset	the	settings	to	the	
default. Note that the network settings will not be reset.
It is impossible to operate the...

90
Viewing Help
If you want to know anything about operation or setup methods on screen, display the "Help" screen.
Displaying the Help screen
    Step 1
Click the [Setup] button.
  →  The setup screen is displayed.
Clicking an underlined item win display the "Help" pop-
window. It is possible to configure the settings while 
displaying the "Help" pop-up menu. Step 2
Click the [Help] button.
  →  The "Help" screen is displayed.
    Step 3
When clicking an item,...