Panasonic Wv Sp302 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Sp302 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
51 shutter speed. 1/30 fix, 3/100 fix, 3/120 fix, 2/100 fix, 2/120 fix, 1/100 fix, 1/120 fix, 1/250 fix, 1/500 fix, 1/1 000 fix, 1/2 000 fix, 1/4 000 fix, 1/10 000 fix Default: Outdoor scene Note: • When a faster shutter speed is selected, it is possi- ble to capture a fast moving object with less blur. • When a faster shutter speed is selected, the sensi- tivity will become lower. Smear also may appear under bright light condition. • When "On" is selected for "Wide dynamic...
Page 52
![Page 52
52
[Black & white mode]
Select switching between the color mode and the black
& white mode from the following.
Off: The color mode is selected.
On: The black & white mode is selected.
SP306
Auto1(Normal): SP306
The camera automatically switches between the
color mode and the black & white mode in accor -
dance with picture brightness (luminance). The
black & white mode will automatically be selected
when the lighting condition becomes darker, while
the color mode will automatically be selected...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-51.png "Page 52
52
[Black & white mode]
Select switching between the color mode and the black
& white mode from the following.
Off: The color mode is selected.
On: The black & white mode is selected.
SP306
Auto1(Normal): SP306
The camera automatically switches between the
color mode and the black & white mode in accor -
dance with picture brightness (luminance). The
black & white mode will automatically be selected
when the lighting condition becomes darker, while
the color mode will automatically be selected...")
52 [Black & white mode] Select switching between the color mode and the black & white mode from the following. Off: The color mode is selected. On: The black & white mode is selected. SP306 Auto1(Normal): SP306 The camera automatically switches between the color mode and the black & white mode in accor - dance with picture brightness (luminance). The black & white mode will automatically be selected when the lighting condition becomes darker, while the color mode will automatically be selected...
Page 53
![Page 53
53
[DNR]
The digital noise reduction function reduces noise auto-
matically under the condition of low illuminance. Select
an effect level "Low" or "High" for the digital noise
reduction.
High: High DNR, afterimage remains
Low: Low DNR, reduces afterimage
Default: High
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the "+" direction, the col-
ors will become thicker. When the cursor is moved in
the "–" direction, the colors...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-52.png "Page 53
53
[DNR]
The digital noise reduction function reduces noise auto-
matically under the condition of low illuminance. Select
an effect level \"Low\" or \"High\" for the digital noise
reduction.
High: High DNR, afterimage remains
Low: Low DNR, reduces afterimage
Default: High
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the \"+\" direction, the col-
ors will become thicker. When the cursor is moved in
the \"–\" direction, the colors...")
53 [DNR] The digital noise reduction function reduces noise auto- matically under the condition of low illuminance. Select an effect level "Low" or "High" for the digital noise reduction. High: High DNR, afterimage remains Low: Low DNR, reduces afterimage Default: High [Chroma gain level] Adjusts the chroma level (color density). When the cursor is moved in the "+" direction, the col- ors will become thicker. When the cursor is moved in the "–" direction, the colors...
Page 54
![Page 54
54
Step 1
Display the "Image adjust" setup menu. (☞ Page 50)
Step 2
Click the [Start] button of "Mask area".
→ Borders will appear and the image displayed on the
[Image/Privacy] tab will be divided into 48 (6x8).
It will be divided into 32 (4x8) when "16:9" is select-
ed for the aspect ratio.
Step 3
Click the divided areas to be masked.
→ The clicked areas will be masked and will become
white. To cancel masking, click the area again.
Step 4
Click the [End] button...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-53.png "Page 54
54
Step 1
Display the \"Image adjust\" setup menu. (☞ Page 50)
Step 2
Click the [Start] button of \"Mask area\".
→ Borders will appear and the image displayed on the
[Image/Privacy] tab will be divided into 48 (6x8).
It will be divided into 32 (4x8) when \"16:9\" is select-
ed for the aspect ratio.
Step 3
Click the divided areas to be masked.
→ The clicked areas will be masked and will become
white. To cancel masking, click the area again.
Step 4
Click the [End] button...")
54
Step 1
Display the "Image adjust" setup menu. (☞ Page 50)
Step 2
Click the [Start] button of "Mask area".
→ Borders will appear and the image displayed on the
[Image/Privacy] tab will be divided into 48 (6x8).
It will be divided into 32 (4x8) when "16:9" is select-
ed for the aspect ratio.
Step 3
Click the divided areas to be masked.
→ The clicked areas will be masked and will become
white. To cancel masking, click the area again.
Step 4
Click the [End] button...
Page 55
![Page 55
55
[Auto]
The focus function starts to automatically adjust focus
based on a subject located in the center of the screen
by clicking the [Execute] button.
[Manual]
The focus can be adjusted manually.
[Near] button: Click this button to adjust the focus to the "Near" side.
[Reset] button: Click this button to reset the focus to the default.
[Far] button: Click this button to adjust the focus to the "Far" side.
[Adjusting method]
SP306
Select the back focus adjustment method upon...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-54.png "Page 55
55
[Auto]
The focus function starts to automatically adjust focus
based on a subject located in the center of the screen
by clicking the [Execute] button.
[Manual]
The focus can be adjusted manually.
[Near] button: Click this button to adjust the focus to the \"Near\" side.
[Reset] button: Click this button to reset the focus to the default.
[Far] button: Click this button to adjust the focus to the \"Far\" side.
[Adjusting method]
SP306
Select the back focus adjustment method upon...")
55 [Auto] The focus function starts to automatically adjust focus based on a subject located in the center of the screen by clicking the [Execute] button. [Manual] The focus can be adjusted manually. [Near] button: Click this button to adjust the focus to the "Near" side. [Reset] button: Click this button to reset the focus to the default. [Far] button: Click this button to adjust the focus to the "Far" side. [Adjusting method] SP306 Select the back focus adjustment method upon...
Page 56
![Page 56
56
[Area]
The privacy zone will be set when an area is designated
by dragging the mouse. Each zone can be overlapped.
Up to 2 privacy zones can be created.
[Display type]
Select a display type of the privacy zone from the fol-
lowing.
Gray: The privacy zones will be displayed in gray.
Off: Does not display the privacy zones.
Default: OffNote:
• Set the privacy zone larger than the size of an object to be hidden.
[Close] button
Click this button to close the "Privacy zone" setup
menu....](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-55.png "Page 56
56
[Area]
The privacy zone will be set when an area is designated
by dragging the mouse. Each zone can be overlapped.
Up to 2 privacy zones can be created.
[Display type]
Select a display type of the privacy zone from the fol-
lowing.
Gray: The privacy zones will be displayed in gray.
Off: Does not display the privacy zones.
Default: OffNote:
• Set the privacy zone larger than the size of an object to be hidden.
[Close] button
Click this button to close the \"Privacy zone\" setup
menu....")
56 [Area] The privacy zone will be set when an area is designated by dragging the mouse. Each zone can be overlapped. Up to 2 privacy zones can be created. [Display type] Select a display type of the privacy zone from the fol- lowing. Gray: The privacy zones will be displayed in gray. Off: Does not display the privacy zones. Default: OffNote: • Set the privacy zone larger than the size of an object to be hidden. [Close] button Click this button to close the "Privacy zone" setup menu....
Page 57
![Page 57
57
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings relating to audio can be configured on this page.Note:
• Images and audio will not be synchronized. Therefore, images and audio may not always match.
• Audio may be interrupted depending on the network environment.
[Audio transmission/reception]
Select the communication mode used for audio data...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-56.png "Page 57
57
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the \"Image/Audio\" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings relating to audio can be configured on this page.Note:
• Images and audio will not be synchronized. Therefore, images and audio may not always match.
• Audio may be interrupted depending on the network environment.
[Audio transmission/reception]
Select the communication mode used for audio data...")
57
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings relating to audio can be configured on this page.Note:
• Images and audio will not be synchronized. Therefore, images and audio may not always match.
• Audio may be interrupted depending on the network environment.
[Audio transmission/reception]
Select the communication mode used for audio data...
Page 58
![Page 58
58
[Mic input interval (Camera to PC)]
Select an interval for audio reception from the following.
20ms/40ms/80ms/160ms
Default: 40msNote:
• When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though
the delay time will be longer.
Select the interval according to the network environ-
ment.
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio
transmitted from the...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-57.png "Page 58
58
[Mic input interval (Camera to PC)]
Select an interval for audio reception from the following.
20ms/40ms/80ms/160ms
Default: 40msNote:
• When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though
the delay time will be longer.
Select the interval according to the network environ-
ment.
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio
transmitted from the...")
58
[Mic input interval (Camera to PC)]
Select an interval for audio reception from the following.
20ms/40ms/80ms/160ms
Default: 40msNote:
• When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though
the delay time will be longer.
Select the interval according to the network environ-
ment.
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio
transmitted from the...
Page 59
![Page 59
59
Configure the multi-screen settings [Multi-screen]
The cameras from which images are to be displayed on a multi-screen can be registered on the "Multi-screen"
page. (☞ Pages 22 and 23: How to display/operate the setup menu)
[IP address]
Enter the IP address or the host name of the camera to
be used for the multi-screen. 4 cameras can be regis-
tered as a group and up to 4 groups (16 cameras) can
be registered.
When the HTTP port number for the camera of which
images are to be...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-58.png "Page 59
59
Configure the multi-screen settings [Multi-screen]
The cameras from which images are to be displayed on a multi-screen can be registered on the \"Multi-screen\"
page. (☞ Pages 22 and 23: How to display/operate the setup menu)
[IP address]
Enter the IP address or the host name of the camera to
be used for the multi-screen. 4 cameras can be regis-
tered as a group and up to 4 groups (16 cameras) can
be registered.
When the HTTP port number for the camera of which
images are to be...")
59
Configure the multi-screen settings [Multi-screen]
The cameras from which images are to be displayed on a multi-screen can be registered on the "Multi-screen"
page. (☞ Pages 22 and 23: How to display/operate the setup menu)
[IP address]
Enter the IP address or the host name of the camera to
be used for the multi-screen. 4 cameras can be regis-
tered as a group and up to 4 groups (16 cameras) can
be registered.
When the HTTP port number for the camera of which
images are to be...
Page 60
![Page 60
60
Configure the alarm settings [Alarm]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD
area settings, and the alarm occurrence notification can be configured on this page.
The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
Configure the settings relating to the alarm action [Alarm]
Click the [Alarm] tab on the "Alarm" page. (☞ Pages 22 and 23: How to display/operate the setup...](http://img.usermanuals.tech/thumb/58/68543/w300_wv-sp302_en_om_d-59.png "Page 60
60
Configure the alarm settings [Alarm]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD
area settings, and the alarm occurrence notification can be configured on this page.
The \"Alarm\" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
Configure the settings relating to the alarm action [Alarm]
Click the [Alarm] tab on the \"Alarm\" page. (☞ Pages 22 and 23: How to display/operate the setup...")
60 Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD area settings, and the alarm occurrence notification can be configured on this page. The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab. Configure the settings relating to the alarm action [Alarm] Click the [Alarm] tab on the "Alarm" page. (☞ Pages 22 and 23: How to display/operate the setup...