Panasonic Wv Sp302 Operating Instructions Manual

71
Configure the settings relating to the face detection [Face detection]
Click the [Face detection] tab on the "Advanced func." page.
The settings relating to displaying the frame to be used for the face detection and th\
e settings relating to the face 
detection information attached to the image can be configured.Important:
	 •	 The	face	detection	function	shall	not	guarantee	the	detection	of	faces	in	an	image.	The	face	detection	accuracy	 varies with imaging conditions. 
 
    
■ Face...

72
Configure the settings relating to the authentica-
tion [User mng.]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-
figured on the "User mng." page. 
The "User mng." page has 3 tabs; the [User auth.] tab, the [Host auth.] \
tab and the [System] tab.
Configure the settings relating to the user authentication [User auth.]
Click the [User auth.] tab on the "User mng." page. (☞ Pages 22 and 23: How to...

73
[Host auth.]
Select	"On"	or	"Off"	to	determine	whether	or	not	to	
authenticate the host.
Default:	Off
[IP address]
Enter the IP address of the PC to be allowed to access 
the camera. Host name cannot be entered for the IP 
address.Note:
	 •	 When	"IP	address/subnet	mask"	is	entered,	it	is	 possible to restrict PCs in each subnet.
	 	 For	example,	when	"192.168.0.1/24"	is	entered	and	 "2. Camera control" is selected for the access level, 
the PCs whose IP address...

74
Configure the settings relating to the priority stream [System]
Click the [System] tab on the "User mng." page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The description below is the configuration of the priority stream that can transmit images without deteriorating the 
image quality and refresh interval even when multiple users access concurrently.
    
■ Priority stream
[Activation]
Select	"On"	or	"Off"	to	determine	whether	or	not	to	use	
the priority...

75
Configure the settings of the servers [Server]
[SMTP server address]
Enter the IP address or the host name of the SMTP 
server used to send e-mails.
Available number of characters: 1 - 128 characters
[SMTP port]
Enter the port number to which e-mails are sent.
Available port number: 1 - 65 535
Default: 25
[POP server address]
When	"POP	before	SMTP"	is	selected	for	"Type",	enter	
the	IP	address	or	the	host	name	of	the	POP	server.
Available number of characters: 1 - 128...

76
[FTP server address]
Enter the IP address or the host name of the FTP serv-
er.
Available number of characters: 1 - 128 charactersImportant:
	 •	 When	entering	the	host	name	for	"FTP	server	 address", it is necessary to configure the DNS set-
tings on the [Network] tab of the "Network" page.  
(☞ page 79)
 
[User name]
Enter the user name (login name) to access the FTP 
server.
Available number of characters: 1 - 32 characters
[Password]
Enter the password to access the FTP server....

77
[Time adjustment]
Select the time adjustment method from the following. 
Time adjusted by the selected method will be used as 
the standard time of the camera.
Manual: Time set on the [Basic] tab on the "Basic" page will be used as the standard time of the cam-
era.
Synchronization with NTP server: Time automatically  adjusted by synchronizing with the NTP server will 
be used as the standard time of the camera.
Default: Manual
[NTP server address]
Enter the IP address or the host name of the...

78
Configuring the network settings [Network]
■ IPv4 network
[DHCP]
Select	"On"	or	"Off"	to	determine	whether	or	not	to	use	
the DHCP function. 
Configure the DHCP server not to assign the same IP 
addresses used for the other network cameras and PCs 
whose IP address is unique. Refer to the network 
administrator for further information about the settings 
of the server.
Default:	Off
    
[IP address(IPv4)]
When not using the DHCP function, enter the IP 
address of the camera. Do not...

79
■ IPv6 network
[Manual]
Select	"On"	or	"Off"	to	determine	whether	or	not	to	
manually configure the IP address for IPv6 network 
(IPv6 address). 
On: Enter an IPv6 address manually.
Off: Manual entry of an IPv6 address will become unavailable.
Default:	Off
[IP address(IPv6)]
When	"On"	is	selected	for	"Manual",	manual	entry	of	
the IPv6 address is required.
Do not enter an address already in use.
Note:
	 •	 When	connecting	to	the	manually	configured	IPv6	 address beyond...

80
[Easy IP Setup accommodate period]
Select "20min" or "Unlimited" to determine how long the network setting \
operation using the Panasonic IP setting 
software can be allowed.
20min: The network setting operation using the Panasonic IP setting software is allowed for 20 minutes.
Unlimited: The network setting operation using the Panasonic IP setting software is allowed without time limitation.
Default: 20minNote:
	 •	 Refer	to	the	network	administrator	for	the	addresses	of	each...