Panasonic Wv Ns324 Operating Instructions Manual

Model No.WV-NS324
Color CCTV Camera
Operating Instructions
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use. 

-2-
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of uninsulated dangerous volt-
age within the products enclosure that
may be of sufficient magnitude to con-
stitute a risk of...

-3-
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-
fiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or...

-4-
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ..........................3
PREFACE ........................................................................5
Features .......................................................................5
System Requirements ..................................................5
Trademarks ..................................................................5
Document Convention  .................................................6
■Camera Cleaning...

-5-
Features
•10/100BASE-T terminal enables your PC to view
camera images via the network.
•Multiscreen function for simultaneous display of the
pictures of up to 4 cameras on the PC monitor
screen.
•Multishot function allows you to see surroundings
of the object with clicking one time.
•User authentication function is available.
•High quality picture of 768 x 494 pixels
•Minimum illumination of 1.0 lx
•Flip-a-chip allows 180 ° tilting to trace objects
passing under the camera.
•Auto pan
•BLC
•SENS UP X4...

-6- •Distributing, copying, disassembling, reverse com-
piling, reverse engineering, and also exporting in
violation of export laws of the software provided
with this product, is expressly prohibited.
Document Convention
These operating instructions use the following conven-
tions when describing the uses and operations.
•Windows98 stands for Microsoft Windows98
Second Edition.
•Windows2000 stands for Microsoft Windows2000.
•Windows ME stands for Microsoft Windows
Millennium Edition.
•Windows NT stands...

-7- 1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside.
Ask a qualified service personnel for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper
handling or storage.
3. Do not expose the camera to rain or moisture,
nor try to operate it in wet areas.
This product is designed for indoor use or locations
where it is protected...

w
e
r
tq
yu
o
i
!0
-8-
CONSTRUCTION
qAlarm Input Connector
wAlarm Output Connector
eVideo Output Connector
rNetwork Port
tPower CableyCamera Mounting Base (Color: Gray)
uPanning Starting Point
iFall Prevention Wire
oDecoration Cover
!0Dome Cover 

Note:All DIP switches except SW1 and SW2 should
always be set to off.
3. Assemble the Camera
Reverse the disassembly procedure. Take care not
to cut any cables.
Precaution
Be sure to select a ceiling board strong enough to sup-
port 4 times the total weight of the camera.
a. Sideway Cable Exit
Prepare a cutout in the diecast case and decora-
tion cover as shown in the following figures.
Cutout in Diecast Case
Status No.
-9-
INSTALLATION
Precautions
•The following installation and connection work
should...

-10- Cutout in Decoration Cover
Note:Remove sharp edges to protect the cables.
b. Top Cable Exit
Prepare a hole in the ceiling board to run the
cables.
1. Mark the mounting holes on the ceiling, using the
removed camera mounting base as a template.2. Fix the camera mounting base to the ceiling with
four screws (not provided, M4).
3. Hook the fall prevention wire on the camera mount-
ing base.
Cautions:
•Use the supplied dust protection sheet if the cam-
era mounting base is liable to be exposed to a...