Panasonic Wv Ns202 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Ns202 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Configure the settings relating to images and the preset positions [Image/Position]
Click the [Image/Position] tab on the Camera setup page. (page 15)
When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly
opened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position]
tab.
The following are descriptions of how to configure the settings relating to image quality, preset positions, auto pan...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-30.png "Page 31
31
Configure the settings relating to images and the preset positions [Image/Position]
Click the [Image/Position] tab on the Camera setup page. (page 15)
When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly
opened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position]
tab.
The following are descriptions of how to configure the settings relating to image quality, preset positions, auto pan...")
31 Configure the settings relating to images and the preset positions [Image/Position] Click the [Image/Position] tab on the Camera setup page. (page 15) When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly opened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position] tab. The following are descriptions of how to configure the settings relating to image quality, preset positions, auto pan...
Page 32
![Page 32
Configure the settings relating to image quality (Image Adjust setup menu)
Click the [SETUP>>] button of Image Adjust on the [Image/Position] tab of the Camera setup page. (page 31)
The settings relating to image quality can be configured with the setup menu displayed in a newly displayed window.
When the values are changed, the changed values will be applied immediately to the currently displayed image on
the [Image/Position] tab.
32
[Super Dynamic 3]
Select ON or OFF to determine whether to turn on...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-31.png "Page 32
Configure the settings relating to image quality (Image Adjust setup menu)
Click the [SETUP>>] button of Image Adjust on the [Image/Position] tab of the Camera setup page. (page 31)
The settings relating to image quality can be configured with the setup menu displayed in a newly displayed window.
When the values are changed, the changed values will be applied immediately to the currently displayed image on
the [Image/Position] tab.
32
[Super Dynamic 3]
Select ON or OFF to determine whether to turn on...")
Configure the settings relating to image quality (Image Adjust setup menu) Click the [SETUP>>] button of Image Adjust on the [Image/Position] tab of the Camera setup page. (page 31) The settings relating to image quality can be configured with the setup menu displayed in a newly displayed window. When the values are changed, the changed values will be applied immediately to the currently displayed image on the [Image/Position] tab. 32 [Super Dynamic 3] Select ON or OFF to determine whether to turn on...
Page 33
![Page 33
33
[White balance]
Select a method of white balance adjustment from the
following.
White color can be adjusted by Red Gain and Blue
Gain.
ATW1:Auto tracing white balance mode
The camera will constantly check the color tempera-
ture of the light source and adjust the white balance
automatically.
Operating color temperature range is approx.
2 700 K – 6 000 K.
ATW2:Auto tracing white balance under a sodium
lamp. The camera will adjust the white balance auto-
matically under a sodium lamp.
Operating color...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-32.png "Page 33
33
[White balance]
Select a method of white balance adjustment from the
following.
White color can be adjusted by Red Gain and Blue
Gain.
ATW1:Auto tracing white balance mode
The camera will constantly check the color tempera-
ture of the light source and adjust the white balance
automatically.
Operating color temperature range is approx.
2 700 K – 6 000 K.
ATW2:Auto tracing white balance under a sodium
lamp. The camera will adjust the white balance auto-
matically under a sodium lamp.
Operating color...")
33 [White balance] Select a method of white balance adjustment from the following. White color can be adjusted by Red Gain and Blue Gain. ATW1:Auto tracing white balance mode The camera will constantly check the color tempera- ture of the light source and adjust the white balance automatically. Operating color temperature range is approx. 2 700 K – 6 000 K. ATW2:Auto tracing white balance under a sodium lamp. The camera will adjust the white balance auto- matically under a sodium lamp. Operating color...
Page 34
![Page 34
34
[DNR (Digital Noise Reduction)]
When this function (digital noise reduction) is active,
noise may be automatically reduced under a low lumi-
nance. Select an effect level LOW or HIGH for the
digital noise reduction.
HIGH:High DNR, afterimage remains
LOW:Low DNR, reduces afterimage
Default:HIGH
[Chroma gain level]
Adjust the chroma level (color density).
When the cursor is moved in the + direction, the colors
will become thicker. When the cursor is moved in the –
direction, the colors will be thinner....](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-33.png "Page 34
34
[DNR (Digital Noise Reduction)]
When this function (digital noise reduction) is active,
noise may be automatically reduced under a low lumi-
nance. Select an effect level LOW or HIGH for the
digital noise reduction.
HIGH:High DNR, afterimage remains
LOW:Low DNR, reduces afterimage
Default:HIGH
[Chroma gain level]
Adjust the chroma level (color density).
When the cursor is moved in the + direction, the colors
will become thicker. When the cursor is moved in the –
direction, the colors will be thinner....")
34 [DNR (Digital Noise Reduction)] When this function (digital noise reduction) is active, noise may be automatically reduced under a low lumi- nance. Select an effect level LOW or HIGH for the digital noise reduction. HIGH:High DNR, afterimage remains LOW:Low DNR, reduces afterimage Default:HIGH [Chroma gain level] Adjust the chroma level (color density). When the cursor is moved in the + direction, the colors will become thicker. When the cursor is moved in the – direction, the colors will be thinner....
Page 35
![Page 35
35
Set mask areas
When OFF is selected for Super Dynamic 3, it is possible to compensate for backlight by masking brighter areas.
Step 1
Display the setup menu of Image Adjust. (page 32)
Step 2
Click the [START] button of Mask area.
→Borders will appear and the image displayed on the
[Image/Position] tab will be divided into 48 (6x8).
Step 3
Click the divided areas to be masked.
→The clicked areas will be masked and will become
white.
To cancel masking, click the area again.
Step 4
Click the [END]...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-34.png "Page 35
35
Set mask areas
When OFF is selected for Super Dynamic 3, it is possible to compensate for backlight by masking brighter areas.
Step 1
Display the setup menu of Image Adjust. (page 32)
Step 2
Click the [START] button of Mask area.
→Borders will appear and the image displayed on the
[Image/Position] tab will be divided into 48 (6x8).
Step 3
Click the divided areas to be masked.
→The clicked areas will be masked and will become
white.
To cancel masking, click the area again.
Step 4
Click the [END]...")
35 Set mask areas When OFF is selected for Super Dynamic 3, it is possible to compensate for backlight by masking brighter areas. Step 1 Display the setup menu of Image Adjust. (page 32) Step 2 Click the [START] button of Mask area. →Borders will appear and the image displayed on the [Image/Position] tab will be divided into 48 (6x8). Step 3 Click the divided areas to be masked. →The clicked areas will be masked and will become white. To cancel masking, click the area again. Step 4 Click the [END]...
Page 36
![Page 36
36
Configure the settings relating to the preset positions (Preset No. setup menu)
Click the [SETUP>>] button of Preset Position on the [Image/Position] tab of the Camera setup page.
(page 31)
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.
Important:
When the zoom factor is 22x or more, the setting of the preset...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-35.png "Page 36
36
Configure the settings relating to the preset positions (Preset No. setup menu)
Click the [SETUP>>] button of Preset Position on the [Image/Position] tab of the Camera setup page.
(page 31)
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.
Important:
When the zoom factor is 22x or more, the setting of the preset...")
36 Configure the settings relating to the preset positions (Preset No. setup menu) Click the [SETUP>>] button of Preset Position on the [Image/Position] tab of the Camera setup page. (page 31) It is possible to register, edit and delete the preset positions on this page. When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently displayed image on the [Image/Position] tab. Important: When the zoom factor is 22x or more, the setting of the preset...
Page 37
![Page 37
37
[Preset ID (0-9, A-Z)]
Enter the preset ID to be displayed on images. The pre-
set IDs can be applied to each preset position.
Available characters:0-9, A-Z and the following
marks.
!#$%&‘()*+,-./:; =?
Number of characters for the preset ID:0 - 16 char-
acters
Default:None (blank)
Note:
The entered preset ID will be displayed next to the
preset position number on the pull-down menu.
When ON is selected for Preset ID, the preset ID
will be displayed on images.
[Auto focus]
Select AUTO or OFF to...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-36.png "Page 37
37
[Preset ID (0-9, A-Z)]
Enter the preset ID to be displayed on images. The pre-
set IDs can be applied to each preset position.
Available characters:0-9, A-Z and the following
marks.
!#$%&‘()*+,-./:; =?
Number of characters for the preset ID:0 - 16 char-
acters
Default:None (blank)
Note:
The entered preset ID will be displayed next to the
preset position number on the pull-down menu.
When ON is selected for Preset ID, the preset ID
will be displayed on images.
[Auto focus]
Select AUTO or OFF to...")
37 [Preset ID (0-9, A-Z)] Enter the preset ID to be displayed on images. The pre- set IDs can be applied to each preset position. Available characters:0-9, A-Z and the following marks. !#$%&‘()*+,-./:; =? Number of characters for the preset ID:0 - 16 char- acters Default:None (blank) Note: The entered preset ID will be displayed next to the preset position number on the pull-down menu. When ON is selected for Preset ID, the preset ID will be displayed on images. [Auto focus] Select AUTO or OFF to...
Page 38
![Page 38
38
Configure the settings relating to the auto pan function (Auto Pan setup menu)
Click the [SETUP>>] button of Auto Pan on the [Image/Position] tab of the Camera setup page. (page 31)
The settings relating to the auto pan function can be configured with the setup menu displayed in a newly displayed
window.
Position
[Start position]
Move the camera to the desired point to be set as the
start point of the auto panning using the control pad/but-
tons and adjust the image using the [ZOOM] buttons
and the...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-37.png "Page 38
38
Configure the settings relating to the auto pan function (Auto Pan setup menu)
Click the [SETUP>>] button of Auto Pan on the [Image/Position] tab of the Camera setup page. (page 31)
The settings relating to the auto pan function can be configured with the setup menu displayed in a newly displayed
window.
Position
[Start position]
Move the camera to the desired point to be set as the
start point of the auto panning using the control pad/but-
tons and adjust the image using the [ZOOM] buttons
and the...")
38 Configure the settings relating to the auto pan function (Auto Pan setup menu) Click the [SETUP>>] button of Auto Pan on the [Image/Position] tab of the Camera setup page. (page 31) The settings relating to the auto pan function can be configured with the setup menu displayed in a newly displayed window. Position [Start position] Move the camera to the desired point to be set as the start point of the auto panning using the control pad/but- tons and adjust the image using the [ZOOM] buttons and the...
Page 39
![Page 39
39
Configure the settings relating to the privacy zone (Privacy Zone setup menu)
Click the [SETUP>>] button of Privacy Zone on the [Image/Position] tab of the Camera setup page. (page 31)
When there is a zone that is not to be displayed, set the zone as a privacy zone to not to display. Up to 8 privacy
zones can be set.
Notes:
•Depending on the panning/tilting direction (especially when the tilting degree is 45°- 90°) and the zooming fac-
tor, the area set as the privacy zone may become visible. Make...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-38.png "Page 39
39
Configure the settings relating to the privacy zone (Privacy Zone setup menu)
Click the [SETUP>>] button of Privacy Zone on the [Image/Position] tab of the Camera setup page. (page 31)
When there is a zone that is not to be displayed, set the zone as a privacy zone to not to display. Up to 8 privacy
zones can be set.
Notes:
•Depending on the panning/tilting direction (especially when the tilting degree is 45°- 90°) and the zooming fac-
tor, the area set as the privacy zone may become visible. Make...")
39 Configure the settings relating to the privacy zone (Privacy Zone setup menu) Click the [SETUP>>] button of Privacy Zone on the [Image/Position] tab of the Camera setup page. (page 31) When there is a zone that is not to be displayed, set the zone as a privacy zone to not to display. Up to 8 privacy zones can be set. Notes: •Depending on the panning/tilting direction (especially when the tilting degree is 45°- 90°) and the zooming fac- tor, the area set as the privacy zone may become visible. Make...
Page 40
![Page 40
40
ZOOM buttons
FOCUS buttons
BRIGHTNESS buttons
Control pad/buttons
Refer to pages 6 and 7 for descriptions of how to oper-
ate these buttons/pad.[CLOSE] button
Click this button to close the Privacy zone setup menu.
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the Camera setup page. (page 15)
The settings relating to audio can be configured on this page.
[Audio mode]
Select the communication mode used for audio data
transmission/reception between the camera and the PC...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-39.png "Page 40
40
ZOOM buttons
FOCUS buttons
BRIGHTNESS buttons
Control pad/buttons
Refer to pages 6 and 7 for descriptions of how to oper-
ate these buttons/pad.[CLOSE] button
Click this button to close the Privacy zone setup menu.
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the Camera setup page. (page 15)
The settings relating to audio can be configured on this page.
[Audio mode]
Select the communication mode used for audio data
transmission/reception between the camera and the PC...")
40 ZOOM buttons FOCUS buttons BRIGHTNESS buttons Control pad/buttons Refer to pages 6 and 7 for descriptions of how to oper- ate these buttons/pad.[CLOSE] button Click this button to close the Privacy zone setup menu. Configure the settings relating to audio [Audio] Click the [Audio] tab on the Camera setup page. (page 15) The settings relating to audio can be configured on this page. [Audio mode] Select the communication mode used for audio data transmission/reception between the camera and the PC...